• 제목/요약/키워드: Rate of volume change

검색결과 612건 처리시간 0.027초

터보펌프 파이로 시동기 기초연구 (Preliminary Study of a Turbopump Pyro Starter)

  • 홍문근;이수용
    • 한국추진공학회지
    • /
    • 제12권2호
    • /
    • pp.74-80
    • /
    • 2008
  • 로켓엔진을 시동할 때 사용하는 터보펌프 시동기를 개발하기 위한 개발로직을 검토하고 기초실험을 통해 요구조건과 설계인자의 적용범위를 도출하였다. 시동기에 사용하는 고체추진제인 AN계 복합추진제는 고-에너지의 가소제와 냉각제를 사용하고 상온에서 AN의 상변화에 따른 급격한 부피변화를 완화하는 상안정화를 적용하였다. 시동기 설계를 위한 기초실험을 통해 추진제의 연소속도는 $0.2{\sim}0.3\;mm/s$ 이며 압력지수는 $0.3{\sim}0.6$ 범위인 경우 충분한 안정성을 확보함을 확인하였다. 신뢰성 있게 파이로 시동기를 작동하기 위해서는 점화에너지의 크기 및 점화에너지 전달방법이 중요하였으며, 선정한 AN계 복합추진제의 안정한 점화를 위한 화염온도의 하한한계는 1400 K로 평가되었다.

수중음향통신을 위한 적응 결정궤환 등화기 (An Adaptive Decision Feedback Equalizer for Underwater Acoustic Communications)

  • 최영철;박종원;임용곤
    • 한국정보통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.645-651
    • /
    • 2009
  • 본 논문에서는 2007년 11월 거제 연안에서 실해역 실험을 통하여 취득한 데이터를 이용하여 수중음향통신을 위한 적응 결정제환 등화기의 비트 오율 성능 분석 결과에 대해서 논한다. 전방먹임 필터 길이, 되먹임 필터 길이, 훈련신호열 길이, 시간지연 등의 변수를 변화시키면서 RLS 알고리듬을 적용한 적응 결정궤환 등화기의 비트 오율을 분석한 결과, 오류정정부호를 적용하지 않았을 때, 전달 거리 9.7km, 4km에서 각각 $4{\times}10^2\;and\;1.5{\times}10^{-2}$ 비트 오율을 얻었다. 얻어진 $10^{-2}$ 수준의 비트 오율은 오류정정부호를 적용할 경우에 $10^{-3}$ 이하로 낮아지므로, 적응 결정궤환 등화기는 모뎀의 무게 및 부피가 작아야 하는 자율무인잠수정에서 고속의 통신 수단을 제공할 수 있는 기술로서 활용 가치가 클 것으로 예상된다.

전산유체 기법을 이용한 용존공기부상법에서의 접촉도 조건변화에 따른 충돌효율평가 (Collision Efficiency Estimation in the DAF Contact Zone using Computational Fluid Dynamics)

  • 김성훈;유제선;박희경
    • 상하수도학회지
    • /
    • 제18권2호
    • /
    • pp.201-207
    • /
    • 2004
  • Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

열교환기의 나선형 관내 난류유동 수치해석 (Numerical analysis of turbulent flows in the helically coiled pipes of heat transfer)

  • 곽승현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.905-910
    • /
    • 2013
  • 열교환기의 나선형 튜브에 난류모형을 적용하여 유동해석을 수행하였다. 난류모형은 Spalart-Allmaras과 k-${\varepsilon}$이고 시뮬레이션에는 정렬격자를 적용하였다. 레이놀즈 수 영향을 규명하기 위하여 Navier-Stokes 방정식을 풀어 속도벡터, 압력, 잔차, 마찰계수를 재연하였다. 나선형튜브는 원심력을 증가하여 튜브의 바깥부분에 벽전단 응력을 크게 하였다. 열전도율과 마찰저항의 증가는 곡률에 기인하며 튜브의 내부방향으로는 벽 전단응력이 감소했다. 원심력은 유체의 에너지를 증가시켜서 바깥쪽으로 열전도율을 증가시켰고 이는 내부유동의 압력강하 및 관마찰계수가 상호 밀접한 관계가 있음을 규명하여 주었다. 본 수치결과는 검증을 위하여 타 계산에서 얻어진 마찰계수 결과와 비교하였다.

고무 치공구와 필름 함침공정을 이용한 열가소성 장섬유 복합재료 성형공정 연구 (Thermoplastic Film Infusion Process for Long Fiber Reinforced Composites Using Rubber Expandable Tools)

  • 김동욱;안영선;이영관;김성우;남재도
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.122-132
    • /
    • 2001
  • 본 연구에서는 온도의 상승에 의하여 팽창하는 열팽창 기능을 가지고 있으면서 부피의 감소에 의하여 발생하는 압력의 손실을 상쇄시킬 수 있는 고무 치공구를 열가소성 고분자의 필름 함침공정에 적용하였다. 일반적인 압축성형공정에서는 온도의 상승에 의하여 수지가 용융되고 이에 수지가 함침됨에 따라 압력이 감소하지만, 고무 치공구를 사용한 경우에는 수지의 함침을 보상한 고무 치공구가 팽창하여 감소된 압력을 보상하기 때문에 급격한 압력의 강하를 억제할 수 있었다. 이렇게 수지의 함침에 따른 고무 치공구의 부피 팽창 그리고 이에 따른 수지 함침속도의 변화를 고려하여 고무 치공구를 이용한 필름 함침공정 모델을 제안하였다. 또한 고무 치공구를 사용하지 않는 일반적인 압축공정에 있어서 수지의 함침에 따른 섬유층 탄성력의 변화를 실험적으로 측정하여 단계적인 압축공정에 있어서 수지의 함침속도를 예측할 수 있는 모델을 제안하였다.

  • PDF

산화전리수를 이용한 질소와 황 계열 악취 및 악취전구물질의 제거 (Removal of nitrogen and sulfur odorous compounds and their precursors using an electrolytic oxidation process)

  • 신승규;안해영;김한승;송지현
    • 상하수도학회지
    • /
    • 제25권2호
    • /
    • pp.223-230
    • /
    • 2011
  • An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

Monitoring Response to Neoadjuvant Chemotherapy of Primary Osteosarcoma Using Diffusion Kurtosis Magnetic Resonance Imaging: Initial Findings

  • Chenglei Liu;Yan Xi;Mei Li;Qiong Jiao;Huizhen Zhang;Qingcheng Yang;Weiwu Yao
    • Korean Journal of Radiology
    • /
    • 제20권5호
    • /
    • pp.801-811
    • /
    • 2019
  • Objective: To determine whether diffusion kurtosis imaging (DKI) is effective in monitoring tumor response to neoadjuvant chemotherapy in patients with osteosarcoma. Materials and Methods: Twenty-nine osteosarcoma patients (20 men and 9 women; mean age, 17.6 ± 7.8 years) who had undergone magnetic resonance imaging (MRI) and DKI before and after neoadjuvant chemotherapy were included. Tumor volume, apparent diffusion coefficient (ADC), mean diffusivity (MD), mean kurtosis (MK), and change ratio (ΔX) between pre-and post-treatment were calculated. Based on histologic response, the patients were divided into those with good response (≥ 90% necrosis, n = 12) and those with poor response (< 90% necrosis, n = 17). Several MRI parameters between the groups were compared using Student's t test. The correlation between image indexes and tumor necrosis was determined using Pearson's correlation, and diagnostic performance was compared using receiver operating characteristic curves. Results: In good responders, MDpost, ADCpost, and MKpost values were significantly higher than in poor responders (p < 0.001, p < 0.001, and p = 0.042, respectively). The ΔMD and ΔADC were also significantly higher in good responders than in poor responders (p < 0.001 and p = 0.01, respectively). However, no significant difference was observed in ΔMK (p = 0.092). MDpost and ΔMD showed high correlations with tumor necrosis rate (r = 0.669 and r = 0.622, respectively), and MDpost had higher diagnostic performance than ADCpost (p = 0.037) and MKpost (p = 0.011). Similarly, ΔMD also showed higher diagnostic performance than ΔADC (p = 0.033) and ΔMK (p = 0.037). Conclusion: MD is a promising biomarker for monitoring tumor response to preoperative chemotherapy in patients with osteosarcoma.

Dichloro Bis-(Ethylenediamine)-Chromium (III) 양이온의 수화반응 (On the Aquation of Dichloro Bis-(Ethylenediamine)-Chromium (III) Cation)

  • 황정의;정종재;백성오
    • 대한화학회지
    • /
    • 제28권2호
    • /
    • pp.95-101
    • /
    • 1984
  • $cis - [Cr(en)_2Cl_2]^+ $착물의 수화반응에 대한 연구를 전기전도도법에 의해. 온도는 $15^{\circ}C{\sim}30^{\circ}C$에서 압력은 $1{\sim}2000bar$의 범위에서 실시하였다. 반응속도는 온도가 증가함에 따라 증가하고, 압력이 증가하면 감소하였다. 활성화부피(${\Delta}V^{\neq}$)는 $25^{\circ}C$, 1bar에서 $1.82cm^2/mole$로 비교적 작은 양의 값을 나타내었으며, 이 값은 압력이 증가함에 따라 감소하고 온도 증가에 따라서는 증가하였다. 활성화엔트로피(${\Delta}S^{\neq}$)$는 $25^{\circ}C$, 1bar에서 -9.019 eu로 작은 음의 값을 나타내었다. 활성화파라미터의 값으로부터 수화반응의 메카니즘은 교환해리(Id)메카니즘인 것으로 밝혀졌다.

  • PDF

자율주행자동차 도입으로 인한 교통흐름 변화 분석 (Impacts of Automated Vehicles on Traffic Flow Changes)

  • 정승원;문영준;이성렬;황기연
    • 한국ITS학회 논문지
    • /
    • 제16권6호
    • /
    • pp.244-257
    • /
    • 2017
  • 교통혼잡은 운전자의 인지반응시간, 운전미숙, 무리한 차로변경 등 인적요인으로부터 발생된다. 자율주행자동차가 도입되면 이러한 인적요인들이 배제되고 군집주행으로 인해 평균주행속도 상승, 교통흐름 안정화, 도로용량 증대 효과가 예상된다. 본 연구는 자율주행자동차도입으로 인한 교통흐름 변화를 교통량-밀도-속도 산포도 그래프를 통해 분석하고, 도로용량 증대 효과를 도출하였다. 분석 결과, 자율주행자동차의 혼입율이 높아질수록 교통량-밀도-속도의 그래프 곡선이 완화되며, 폭이 줄어들어 교통류가 안정적으로 변화하였다. 또한 자율주행자동차 혼입율 100%에서는 도로용량이 약 120% 증대되는 것으로 분석되었다. 자율주행자동차 도입으로 인한 교통혼잡개선 및 교통수요관리 측면에서 긍정적인 기대효과가 있을 것으로 분석되었다.

미국과 중국의 무역분쟁이 한국기업의 경영성과에 미치는 영향에 대한 실증연구 (An Empirical Study on the Effects of the US-China Trade Disputes on Korean Business Performance)

  • 오대혁
    • 아태비즈니스연구
    • /
    • 제13권2호
    • /
    • pp.183-195
    • /
    • 2022
  • Purpose - The study attempted to analyze how the U.S.-China trade dispute affects a highly trade-dependent South Korea. Currently, major domestic and international institutions have issued a number of conflicting predictions that the trade dispute between China and the United States will have a positive and negative impact on South Korea. Accordingly, the present study attempted to analyze using actual data. Design/methodology/approach - The analysis was conducted using actual import and export data from the United States and China and actual import and export data from the United States and China from South Korea. The analysis measured the number and amount of imports and exports by year and month, and the rate of increase and decrease. We also looked at trade dispute days, import and export outcomes and what the impact was. In addition, as a result of the US-China trade dispute, the amount of change in Korea's imports and exports was analyzed. Findings - Empirical analysis shows that South Korea's exports to the United States and China have increased. The analysis results are as follows. First, exports to the United States increased by 5.65% in 2018 and 6.45% in 2019 compared to 2017. Second, exports to China surged 12.34% in 2018 compared to 2017. This increase in South Korea's exports to the United States and its mass exports to the United States shows that South Korea has benefited from the trade dispute between the United States and China. Research implications or Originality - South Korea, which is highly trade-dependent, has been heavily affected by the U.S.-China trade dispute. Various predictions are made about this. The analysis showed that South Korea's export volume has increased. In the end, the effect of the trade transition to the 3rd country did not occur. Rather, the U.S.-China trade dispute appears to have helped South Korea.