• Title/Summary/Keyword: Rate of Substitution

Search Result 547, Processing Time 0.031 seconds

Fundamental Characteristics of CO2-cured Mortar with Varied Rates of Blast Furnace Slag Fine Powder Substitution (고로슬래그 미분말 치환율에 따른 이산화탄소 양생 모르타르의 기초 물성)

  • Ryu, Ji-Su;Jang, Kyung-Su;Na, Hyeong-Won;Hyung, Won-Gil
    • Journal of the Korea Institute of Building Construction
    • /
    • v.24 no.1
    • /
    • pp.11-21
    • /
    • 2024
  • This research elucidates the fundamental properties of carbon dioxide (CO2)-cured mortar as influenced by varying substitution rates of blast furnace slag fine powder. The findings indicate that CO2 curing enhances the formation of calcium carbonate (CaCO3), contributing to pore reduction and the early development of strength. While calcium hydroxide (Ca(OH)2) plays a more pivotal role in the primary development of strength compared to CaCO3, an increase in the substitution rate of blast furnace slag fine powder results in reduced production of Ca(OH)2. Nonetheless, the maintenance of strength through CaCO3 formation is observed even after the depletion of Ca(OH)2, suggesting that the required performance can be sustained post-exposure to the atmosphere following CO2 curing. It is noted that substitution rates exceeding 50% lead to performance deterioration due to CO2, highlighting the necessity for careful adjustment of the substitution ratio.

Wage and Productivity (임금과 생산성)

  • Park, Ki Seong;Ahn, Joyup
    • Journal of Labour Economics
    • /
    • v.27 no.1
    • /
    • pp.165-179
    • /
    • 2004
  • While they compare the growth rate of wage with that of average labor productivity, we compare it with the growth rate of marginal labor productivity. After estimating the elasticity of substitution and technology level, we estimate the marginal labor productivity. Wages and marginal labor productivities are similar over 1963-2000. However, while wages come short of marginal labor productivities over 1963-1986, they exceed marginal labor productivities over 1987-2000. Although the growth rate of wage is not so different from that of marginal labor productivity, it can be disparate from that of average labor productivity. Therefore the former exceeding the latter does not mean the excessive wage growth off the labor demand curve.

  • PDF

Solvent Effect on the Nucleophilic Substitution Reaction of Naphthalene Sulfonyl Chloride with Pyridine (염화나프탈렌술포닐과 피리딘의 친핵성 치환반응에 대한 용매효과)

  • Ikchoon Lee;Tae Seop Uhm;Dae Dong Sung;Geol Yeom
    • Journal of the Korean Chemical Society
    • /
    • v.27 no.1
    • /
    • pp.1-8
    • /
    • 1983
  • Solvent effects on nucleophilic substitution reaction of naphthalene sulfonyl chlorides with pyridine in protic and aprotic solvent have been studied by means of conductometry. Results showed that the rate constants increased with dielectric constants for protic solvents, while they decreased with dielectric constants for aprotic solvents, except for acetonitrile which has a higher dielectric constant but had also greater rate constant. The rate constants were shown to be more susceptible to polarity-polarizability parameter, , than to hydrogen bond donor acidity parameter, ${\alpha}$, indicating that the pulling effect of hydrogen bonding solvent.

  • PDF

Effects of Molecular Weights on the Physico-pharmaceutical Properties of Poly-L-glutamic acid-cytarabine Conjugates

  • Kim, Chong-Kook;Kwon, Kyoung-Ae;Jeong, Eun-Ju;Lee, Myung-Gull
    • Archives of Pharmacal Research
    • /
    • v.12 no.2
    • /
    • pp.88-93
    • /
    • 1989
  • In order to obtain some informations about the effect of molecular weight on the release rate of drug from drug carrier, two types of poly-L-glutamic acid (PLGA)-cytarabine (ara-C) conjugates, PLGA-ara-C:I and PLGA-ara-C:II, were synthesized using two types of PLGA having different average molecular weight, 43,000 and 77,800, respectively. The PLGA-ara-C conjugates were synthesized by mixed anhydride method and found to be covalently linked. Both types of conjugates charged negatively at biological pH. The pH-dependent release rate of ara-C was observed in both cases, and the release rate was accelerated in basic, acidic conditions (the k values were 0.015 $day^{-1}$ at pH 7.0, 0.024 $day^{-1}$ at pH 5.0, and 0.059 $day^{-1}$ at pH 9.0 in the case of PLGA-ara-C:I) and in the presence of pretense. The time required for the release of 16.5% of ara-C from PLGA-ara-C:I were 8 hr and 144 hr in the presence and absence of protease, respectively. Although both types of conjugates showed similar drug substitution ratio, they showed different release rates. Between the two types of conjugates, PLGA-ara-C:II showed the faster release rate (0.030 vs 0.042 $day^{-1}$ in pH 7.4 phosphate buffer solution at $37^{\circ}C$) and the smaller activation energy for the release of drug (12.5 vs 7.7 Kcal/mol) than PLGA-ara-C:I. The characteristic effect of molecular weight on the release rates of PLGA-ara-C conjugates suggests that the drug release rate might be effectively controlled over a prolonged period of time by the combined use of the different types of PLGA-ara-C conjugates having different molecular weights.

  • PDF

Estimation of the quantitative trait loci associated with breaking and bending types lodging resistance in rice using chromosome segment substitution lines derived from a cross between Takanari and Koshihikari

  • Mulsanti, Indria Wahyu;Yamamoto, Toshio;Ueda, Tadamasa;Samadi, Ahmad Fahim;Adachi, Shunsuke;Hirasawa, Tadashi;Ookawa, Taiichiro
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.133-133
    • /
    • 2017
  • Lodging is one of the important constraints in rice production. The lodging destroys the canopy structure, and sharply reduces the capacity of photosynthetic rate and dry matter production. In cereal crops, stem lodging can be classified into two types: stem breaking type and stem bending type. To improve stem lodging resistance, it is important to reveal strong culm traits of superior lodging resistant varieties. There are large varietal differences in parameters associated with the bending moment at breaking (M) and flexural rigidity (FR). The indica variety Takanari possesses large M due to its large section modulus (SM) despite of its small bending stress (BS), while Takanari also has large FR due to its large secondary moment of inertia (SMI) and Young's modulus (YM). To identify quantitative trait loci (QTLs) and the corresponding genes associated with the parameters for M ($=SM{\times}BS$) and FR ($=SM{\times}YM$) should enable to develop lodging resistant varieties, efficiently. In order to identify QTLs for cell wall materials such as cellulose, hemicellulose and lignin associated with BS and YM, a set of Chromosome Segment of Substitution Lines (CSSLs) consisted of 37 lines with chromosome segments of Koshihikari in the genetic background of Takanari were used. Takanari had large M and small BS as compared with Koshihikari. The QTLs for BS were estimated on chromosomes 3, 5, 6, 8, 9, 10, 11 and 12. Koshihikari alleles increased BS in these QTLs. Takanari had a large FR due to its large SMI and YM as compared with Koshihikari. The YM was increased by substitution of the Koshihikari chromosomal segments on chromosomes 2, 10 and 11. Other QTLs estimated on chromosomes 7 and 12 that Koshihikari alleles contributed to the decrease of YM. For lignin, only one major QTL for lignin density was detected on chromosome 11. Hollocellulose densities were increased by the substitution of Koshihikari segments on chromosomes 5 and 11. On the other hand, these were decreased on chromosomes 1 and 3 by substitution of Koshihikari segments. QTLs for cellulose density were estimated on chromosomes 1, 3 and 5 by substitution of Koshihikari segments. For hemicellulose, QTL on chromosome 3 showed that hemicellulose density decreased by the substitution of Koshihikari segment. However, hemicellulose densities on chromosomes 5, 8 and 11 showed the opposite effects. The QTLs for hemicellulose, cellulose, and hollocelulose densities identified on chromosome 5 overlapped with that for bending stress, indicating the positive effect of Koshihikari segment on increasing bending stress. These results suggest that some QTLs for the densities of cell wall materials contribute to increasing bending stress and Young's modulus, and could be utilized to improve the lodging resistance for both types of breaking and bending in rice varieties.

  • PDF

Effects of Sulfur Substitution on Chemical Bonding Nature and Electrochemical Performance of Layered LiMn0.9Cr0.1O2-xSx

  • Lim, Seung-Tae;Park, Dae-Hoon;Lee, Sun-Hee;Hwang, Seong-Ju;Yoon, Young-Soo;Kang, Seong-Gu
    • Bulletin of the Korean Chemical Society
    • /
    • v.27 no.9
    • /
    • pp.1310-1314
    • /
    • 2006
  • Sulfur-substituted $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$ $(0\;\leq\;x\;\leq\;0.1)$ layered oxides have been prepared by solid state reaction under inert atmosphere. From powder X-ray diffraction analyses, all the present lithium manganates were found to be crystallized with monoclinic-layered structure. Electrochemical measurements clearly demonstrated that, in comparison with the pristine $LiMn_{0.9}Cr_{0.1}O_2$, the sulfur-substituted derivatives exhibit smaller discharge capacities for the entire cycle range but the recovery of discharge capacity after the initial several cycles becomes faster upon sulfur substitution. The effect of the sulfur substitution on the chemical bonding nature of $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$has been investigated using X-ray absorption spectroscopic (XAS) analyses at Mn and Cr K-edges. According to Mn K-edge XAS results, the trivalent oxidation state of manganese ion remains unchanged before and after the substitution whereas the local structure around manganese ions becomes more distorted with increasing the substitution rate of sulfur. On the other hand, the replacement of oxygen with sulfur has negligible influence on the local atomic arrangement around chromium ions, which is surely due to the high octahedral stabilization energy of $Cr^{+III} $ ions. Based on the present experimental findings, we have suggested that the decrease of discharge capacity upon sulfur substitution is ascribable to the enhanced structural distortion of $MnO_6$ octahedra and/or to the formation of covalent Li-S bonds, and the accompanying improvement of cyclability would be related to the depression of Mn migration and/or to the pillaring effect of larger sulfur anion.

Effects of Dietary $\beta$-Crotene Substitution for Vitamin A and Chronic Consumption of Ethanol on Folate Metabolism in Rats ($\beta$-Carotene 대체 급여 및 에탄올의 만성적 급여가 흰쥐가 엽산대사에 미치는 영향)

  • 임은선
    • Journal of Nutrition and Health
    • /
    • v.32 no.4
    • /
    • pp.376-383
    • /
    • 1999
  • The effects of $\beta$-carotene substitutionl for vitamin A and the chronic consumption of ethanol of ethanol on hepatic folate metabolism were studied it rats. The substitution of $\beta$-carotene for vitamin A depressed hepatic 10-formyl-tetreahydrofolate dehydrogenase(10-formyl-tetrahydrofolate : NADP oxidoreductase, E.C. 1.5. 1.6)activity to 65% of controls(p<0.001) and enhanced hepatic 5, 10-methy-lenetetrahydrofolate reductase(E. C. 6.3.3.2)activity by 56% with respect to control levels(p<0.001). Hepatic activity of 10-formyltertrahydrofolate dehydrogenase was depressed to about half that of control levels by ethanol administration to rats(36% ethanol diet, p<0.001). The activity of 5, 10-methyleneterahydrofolate reductase was not changed by ethanol consumption. The increased activity of 5, 10-methyleneterahydrofolate reductase and the decreased activity of 10-formyltetrahydrofolate dehydrogenase appeared to decrease the level of nonmethyl folate conezyme and the rate of one-carbon metabolism. Plasma homocysteine concentrations were significantly higher in rats fed ethanol(p<0.01) o $\beta$-carotene(p<0.001) than in controls, which suggests that increased activity of 5, 10-methylenetetrahydrofolate reductase can depress homocysteine metabolism. We concluded that dietary substitution of $\beta$-carotene for vitamin A or chronic administration of ethanol resulted in changes in the activity of hepatic folate-dependent enzymes, which could affect the distribution of folate derivatives, plasma homocysteine levels and one-carbon metabolism.

  • PDF

Effects of A-Site Sr and B-Site Substitution on the Dielectric Properties of BaTiO3 Ceramics (A-site Sr 및 B-site Ca 첨가 BaTiO$_3$ 세라믹스의 유전특성)

  • 박재관;오태성;김윤호
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.9
    • /
    • pp.689-695
    • /
    • 1991
  • Dielectric properties of Ba1-$\chi$Sr$\chi$Ti1-yCayO3-y ceramics, where Sr and Ca were doped to Ba-site and Ti-site within the range of 0 x 0.24 and 0 y 0.05, respectively, were investigated. The substitution of Ca for Ti, which maintained the high resistivity of these formulations after sintering in a reducing atmosphere, was confirmed. Ca addition decreased the tetragonality c/a, increased the unit cell volume, and lowered Curie temperature, which were attributed to the occupancy of Ca2+ ions on Ti-sites. The lowering of Curie temperature by Ca addition was affected by the substitution of Sr for Ba-site; within 2 mol% of Ca, Curie temperature was lowered at a rate of 2$0^{\circ}C$ and 16$^{\circ}C$ per mol% of Ca at x=0 and x=0.08, respectively. Whereas the resistivity of the formulations without Ca was reduced to 107 {{{{ OMEGA }}cm, when sintered at low oxygen partial pressure of 10-9 MPa, the resistivity value higher than 1011 {{{{ OMEGA }}cm was maintained for the formulations containing Ca more than 0.5 mol%. Dielectric loss factor, tan$\delta$, was about 1% for most formulations.

  • PDF

Comparative study: nonsynonymous and synonymous substitution of SARS-CoV-2, SARS-CoV, and MERS-CoV genome

  • Sohpal, Vipan Kumar
    • Genomics & Informatics
    • /
    • v.19 no.2
    • /
    • pp.15.1-15.7
    • /
    • 2021
  • The direction of evolution can estimate based on the variation among nonsynonymous to synonymous substitution. The simulative study investigated the nucleotide sequence of closely related strains of respiratory syndrome viruses, codon-by-codon with maximum likelihood analysis, z selection, and the divergence time. The simulated results, dN/dS > 1 signify that an entire substitution model tends towards the hypothesis's positive evolution. The effect of transition/transversion proportion, Z-test of selection, and the evolution associated with these respiratory syndromes, are also analyzed. Z-test of selection for neutral and positive evolution indicates lower to positive values of dN-dS (0.012, 0.019) due to multiple substitutions in a short span. Modified Nei-Gojobori (P) statistical technique results also favor multiple substitutions with the transition/transversion rate from 1 to 7. The divergence time analysis also supports the result of dN/dS and imparts substantiating proof of evolution. Results conclude that a positive evolution model, higher dN-dS, and transition/transversion ratio significantly analyzes the evolution trend of severe acute respiratory syndrome coronavirus 2, severe acute respiratory syndrome coronavirus, and Middle East respiratory syndrome coronavirus.

Effects of Crack Reducing Agent Mixed with Aluminum Slag on the Engineering Properties of Floor Mortar for Apartment House (알루미늄슬래그가 혼입된 팽창성 균열저감제가 공동주택용 바닥 모르타르의 공학적 특성에 미치는 영향)

  • Han, Sang-Yoon;Han, Min-Cheol
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.4
    • /
    • pp.450-457
    • /
    • 2017
  • This study is to develop high quality floor mortar which can be applied in construction sites using EXFG(Expansive admixdure Flue Gas desulfurization gypsum). First, as the substitution rate of ALS(Aluminum Slag) increased, the flow is increased proportionally. EXFG showed a tendency to decrease with increasing substitution rate. Also, in the case of the setting time of 5% of ALS replacement rate, the setting time of Plain compared to EXFG was decreased by 5~20%. The compressive strength increased with the ALS replacement ratio at 0%, 5% and the EXFG replacement ratio at 1%. The strength was increased when the ALS replacement ratio was more than 10%. In the case of ALS replacement rate of 0% and 5%, drying shrinkage compared to plain was decreased by about 10~25% regardless of EXFG replacement rate.