• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.71-78
• /
• 2018

This paper presents the assembling of multiple patches based on the single patch isogeometric formulation for the shear deformable shell element given in the previous study. The geometrically exact shell formulation has been accomplished with the shell theory based formulation and the generalized curvilinear coordinate system directly derived from the given NURBS geometry. For the knot elements matching across adjacent surfaces, the zero-th and first parametric continuity conditions are considered and the corresponding coupling constraints are implemented by a master-slave formulation between adjacent patches. The constraints are then enforced by a substitution method for condensation of the slave variables, thereby reducing the model size. Through numerical investigations, the important features of the first parametric continuity condition are confirmed. The performance of the multi-patch shell models is also examined comparing the rate of convergence of response coefficients for the zero and first order continuity conditions and continuity in coupling boundary between two patches is confirmed.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.2
• /
• pp.177-182
• /
• 1994

ICR female mice aged 3 to 4 weeks, were stimulated with 7.5 IU PMS injection. At 48-52h post-PMS injection, ovaries were dissected out and oocytes-cumulus complexes(OCCs) were divided into three groups, cumulus-free oocytes(O), cumulus-free oocyte cocultured with cumulus cells(O+C) and OCC. The oocyte were cultured in TCM199 containing various protein sources, FCS, BSA or PVP with gonadotropins(Gns) for 24h. Spermatozoa were collected from cauda epididymis and capacitated in T6 + BSA for 2h. After oocyte maturation in vitro(IVM) in different experimental groups, matured oocytes were inseminated with the capacitated spermatozoa in T6 + BSA for 6h. In the groups of IVM in TCM + BSA or PVP, fertilization(IVF) did not occur efficiently. However, increased fertilization was found in TCM+ FCS group. The oocytes groups, with cumulus cells showed decreased polyspermy in FCS group (O; 31.8 %, O + C; 12.2 %, OCC; 16%), the addition of Gns did not prevent polyspermy in all three groups. The rates of fertilization increased in zona-free oocytes in PVP group. This results showed that culture system for IVM and IVF could be improved. Furthermore, PVP can be used for the substitution of protein source during maturation, and its low rate of fertilization has been found due to zona hardening which occurred in FCS-free medium.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.131-139
• /
• 2000

We designed high dose rate Ir-192 source which was prepared for substitute the Co-60 source in Ralstron unit (Simatsu, Japan) which is supplied for cervical cancer treatment. The source dimension is 1.5 mm in a diameter and 1.5mm thickness of cylinder and encapsulated with 3 mm diameter of stainless steel(SUS316L) to substituted for the Co-60 source size. The Ir-192 source was prepared the dose model for tissue dose computation through the experimental determination of apparent activity and applied the empirical tissue correction factors extended to 20cm distance. The tissue dose model was applied the 4.69 R/cm-mCi-hr gamma constant and the ratio of energy absorption coefficient of water to that of air showed 1.112 include filteration of the self-absorptions. In this experiments, we prepared the dose computation software to clinical usefulness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6890-6897
• /
• 2014

EAF reduction slag has unstable properties of expansion and destruction. Therefore, it cannot be used as a construction material. The purpose of this study was to use EAF reduction slag as a concrete admixture. EAF reduction slag contains $11CaO{\cdot}7Al_2O_3{\cdot}CaF_2$ and ${\beta}-C_2S$ (calcium aluminate compounds). To confirm the properties of EAF reduction slag as a concrete admixture, the condensation, compressive strength and activity factor due to substitution rate of EAF reduction slag were measured. Originally, EAF reduction slag was cured rapidly because of its chemical composition ($11CaO{\cdot}7Al_2O_3{\cdot}CaF_2$). On the other hand, when 8% gypsum was added, its properties of condensation and compressive strength were similar to the plain specimen. When 6% gypsum was added, the quality of the KS F 2536 standards (quality standard number 3) were met in terms of activity factor. Overall, 8% gypsum addition is the most appropriate by considering the activity factor in the long-term compressive strength.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.35-41
• /
• 2020

The thin coating material used in the outer insulation finishing method is a finishing material mainly based on acrylic emulsion. In this study, the properties of silane modified acrylic emulsion and silica dispersed acrylic emulsion were evaluated. Experimental results showed that the silane modified acrylic emulsion had no significant effect on improving tensile strength, but was effective in improving the performance of adhesion strength, water absorption coefficient, and hot and cold repeat resistance. Silica-dispersed acrylic emulsions were effective in improving tensile strength, and at 10% substitution rate, they were effective in improving the performance of adhesion strength, water absorption coefficient and hot / cold resistance. Through this, it was judged that a composite emulsion capable of improving the performance of the acrylic emulsion could be prepared.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.560-567
• /
• 2023

This study is part of the research on fire-resistant materials to prepare for changing fire behavior, oyster shell and egg shell, which are natural calcium carbonate materials, were substituted as fine aggregates. The purpose of this study was to evaluate the strength and fire resistance performance according to the substitution rate, and to provide data for use as fire resistance material. Oyster shells and egg shells were substituted with 10~50 % of the fine aggregate, respectively, and tested for strength and Simplified heating according to the KS test method. Although the strength of OS was measured to be higher than that of ES, the backside temperature was also measured to be higher. As a result, it is recommended to use fireproof boards with OS where strength performance is required, such as explosive fires, Where high fire resistance performance is required, such as high-temperature fires over 1000 ℃, fireproof boards with ES can be selected according to the application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.362-366
• /
• 2000

$Li_{0.44}MnO_2$cathode material has high reversibility during lithium insertion processes and is not easily damaged through over-charging or over-discharging. $Mn_2O_3$is often present as an impurity phase, and reduce the electrochemical capacity of electrode because this phase is electrochemically inert. Adding of excess NaOH reduced the $Mn_2O_3$to the content under undetectable by X-ray diffraction. Because the capacity can be increased in the cathode materials with larger unit cell, some of the manganese was replaced with titanium having larger ion size, and powders with the formula $Li_{0.44}T_{iy}Mn_{1-y}O_2$(where y = 0.11, 0.22, 0.33, 0.44, and 0.55) was synthesized and characterized. A maximum reversible capacity of 150 mAh/g was obtained for $Li/P(EO)_8$LiTFSI/$Li_{0.44}Ti_{0.22}Mn_{0.78}O_2$cells in electrochemical potential spectroscopy (ECPS) experiments. Cells with the titanium-doped manganese oxides exhibited a fade rate of 0.12 % or less per cycle.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.157-161
• /
• 1997

The crystallographic site dependent substitution of $^{18}O$ for $^{16}O$ in $Bi_{2}Sr_{2}Ca_{0.8}Y_{0.2}Cu_{2}^{16}O_{8+\delta}$ has heen investigated. In the Kaman spectra of $Bi_{2}Sr_{2}Ca_{0.8}Y_{0.2}Cu_{2}^{16}O_{8+\delta}$ three prominent Raman bands are observed at 297. 464, and $623cm^{-1}$. As the $^{16}O$ arc replaced hy $^{18}O$, all the three bands shift to lower wavewnumbers. The rate of this isotopic shift is similar for the hands at 397 and $464cm^{-1}$. whereas it is quite slower for the hand at $623cm^{-1}$ '['his implys that the $^{16}O-^{18}O$ exchange reaction is crystallographic sites dependent. .Assuming a tetragonal symmetry, we assign the bands at 623. 464, and $297cm^{-1}$ to the vibrations of $O_{pl}(A_{g}),\;O_{ap}\;and\;O_{Bi}$ respectively.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.8-12
• /
• 2003

According to the recent trend to raise the horizontal scan frequency to increase the image refinement of the High Definition TV and High Resolution Display, material with low core loss is required for the ferrite core for deflection yoke, which is secured even in the high frequency range. liking notice of the influence on the fine structure of Mg-Zn ferrite by the chemical com position and process, low temperature sintering was proceeded. Cu was added to the low loss Mg-Zn system ferrite. After select-ing MgO, ZnO, $Fe_2$$O_3$, CuO, MgO was substituted for CuO while varying the composition ratio. Then the sample was sintered for 3 hours between $980～1350^{\circ}C$ Magnetic permeability, power consumption, shrinkage rate, core loss were measured. The start-ing temperature to test the shrinkage of the sample was nearby $900^{\circ}C$, it increased according to the substitution process of Cu, and the firing temperature was lowered about $-50～-75^{\circ}C$ alongside of the process.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.31-41
• /
• 2006

The main purpose of this paper is to develop the practical method to estimate the congestion price in odor to overcome the difficulty of traditional microeconomics approach for demand and cost function concepts. In this paper, we estimate the theoretical congestion toll which reflecting the real traffic conditions such as a speed-density functions using a traffic engineering methods We calculates the optimal congestion toll based on the real traffic conditions assuming that the electronic road pricing (ERP) systems ave installed for the study road. After evaluating the various speed-density relationship methods. we found that the Drake model is best suited for the Gangbyeon Expressway Using the Drake model, the optimal congestion toll will be 94 to 3,255 Won for the traffic speed between 44km/h to 68 km/h based on wage rate method and 107 to 6,381 Won for the marginal substitution method for the Gangbyeon Expressway in city of Seoul, Korea.