• Computers and Concrete
• /
• 제33권5호
• /
• pp.519-533
• /
• 2024

Many materials including cementitious concrete-type materials undergo material property changes during high-rate loading. There is a wealth of research regarding this phenomenon for concrete in compression and tension. However, there is minimal knowledge about how mortar material used in concrete masonry unit (CMU) construction behaves in high-rate shear loading. A series of experiments was conducted to examine the bond strength of mortar bonded to CMU units under high-rate shear loading. A novel experimental setup using a shock tube and dynamic ram were used to load specially constructed shear triplets in a double lap shear configuration with no pre-compression. The Finite Element Method was leveraged in conjunction with data from the experimental investigation to establish if the shear bond between concrete masonry units and mortar exhibits any rate dependency. An increase in shear bond strength was observed when loaded at a high strain rate. This data indicates that the CMU-mortar bond exhibits a rate dependent strength change and illustrates the need for further study of the CMU-mortar interface characteristics at high strain rates.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.355-363
• /
• 2023

The main purpose of this study is to characterize the size-dependent strain rate sensitivity in structural steel using the continue stiffness measurement (CSM) indentation. A series of experiments, such as CSM indentation and optical microscope examination, has been performed at the room temperature at different rate conditions. The results indicated that indentation hardness, strain rate, and flow stress showed size-dependent behavior. The dependency of indentation hardness, strain rate, and flow stress on the indentation size was attributed to the transition of the dislocation nucleation rate and the dislocation behaviors during the indentation process. Since both hardness and strain rate showed the size-dependent behavior, SRS tended to depend on the indentation depth. The results indicated that the SRS was quite high over 2.0 at the indentation depth of 240 nm and quickly dropping to 0.08, finally around 0.046 at large indents. The SRS values at large indentations strongly agree with the general range reported for several types of low-carbon steel in the literature (Chatfield and Rote 1974, Nguyen et al. 2018b, Luecke et al. 2005). The results from the present study can be used in both static and dynamic analyses of structures as well as to assess and understand the deformation mechanism and the stress-state of material underneath the indenter tip during the process of the indentation testing.

• 한국진공학회지
• /
• 제21권5호
• /
• pp.242-248
• /
• 2012

방사광 가속기에서 얻은 x-선을 이용하여 초고진공에서 열처리를 통하여 얻어진 $TiO_2$ (001) 단결정 표면의 원자가 전자대에 대한 광전자 분광연구를 수행하였다. 이 연구를 통하여 특히 페르미 준위 0.9 eV 근처에 있는 결함에 기인한 전자 상태의 변화로 부터 $Ti^{3+}$ 결함의 산화 또는 열확산 과정에 대한 반응 속도론적 특성을 연구하였다. 본 연구의 결과는 (001)면에서의 $Ti^{3+}$ 결함의 열역학적 특성이 $TiO_2$ (110) 단결정면에서의 그것과 어떻게 다른지를 규명하는데 큰 의미가 있다. 연구 결과, (001)과 (110) 결정면에서의 $Ti^{3+}$ 결함의 거동은 산화 반응성과 결정 내에서의 열적 확산 특성에서 매우 유사하다는 것을 알게 되었다. 이와 같은 결과를 얻게 된 주된 이유 중의 하나는 관여하는 $Ti^{3+}$ 결함이 주로 표면 근처에 분포되어 있다는데서 찾을 수 있다.

• 한국식품영양학회지
• /
• 제29권3호
• /
• pp.363-370
• /
• 2016

The purpose of this study is to investigate the dietary life status according to smart device use among university students. In 2015, data was collected during a 3 month survey of the eating behaviors, lifestyles, eating habits, and use of smart devices of 550 university students, as well as their dependency on smartphones. Ultimately, 520 subjects (94.5% analysis rate) were divided into three groups based on their daily use time of smart device: low-use group (<4.7 hours, n=173), medium-use group (${\geq}4.7hours$ and <6.4 hours, n=174), and high-use group (${\geq}6.4hours$, n=173). The more frequent use groups showed a higher level of dependency on the smartphone. Breakfast was found to be the most commonly skipped meal; and the high-use group showed a higher response of irregular meals than low-use group. In assessment of eating habits, the subjects with less smart device usage ate more regularly and at fixed times, did not overeat, drank milk everyday, and did not consume processed food as often. To sum up, more irregularity of meal and undesirable eating habits were found among university students with higher use of smart devices. These results suggest that a control of smart device usage would lead to a more desirable dietary life in university students.

• 정보보호학회논문지
• /
• 제33권2호
• /
• pp.253-266
• /
• 2023

널 포인터 역참조 (Null Pointer Dereference) 취약점은 정상적인 메모리 주소를 저장한 포인터가 아닌 널 포인터를 참조할 때 발생하는 취약점이다. 그러므로, 서비스거부공격 (Denial-of-service)와 같은 공격에 악용되어 큰 피해를 줄 수 있기 때문에 식별하고 제거해야 할 중요한 취약점이다. 기존 연구에서는 기호실행과 같은 정적분석을 통해 취약점을 탐지하는 방법을 많이 제안하였다. 그러나 커널과 같은 복잡도가 높은 대형 프로그램을 검사할 때는 경로폭발 (path explosion)과 제약조건(constraint solver) 때문에 효율성이 제한되며 주어진 시간 내에 탐지하지 못할 수 있다. 또는 대형 프로그램 중 일부 함수들 혹은 라이브러리 함수를 탐지할 때 전체 프로그램의 상태를 알 수 없기 때문에 완전한 분석을 수행하지 못해 정확도가 높지 않은 경우가 있다. 본 논문에서는 소스코드가 없는 대규모 프로그램에서 특정한 일부 기능 검사 할 때 빠르고 정확하게 검사하기 위한 가벼운 취약점 탐지도구를 연구개발 하였다. 변수나 포인터를 기호로 표시하고 프로그램 실행을 에뮬레이션하여, 각 실행경로에서 데이터 의존성(data dependency) 분석과 휴리스틱 방법으로 널 포인터 역참조 취약점을 탐지한다. 기존 bap_toolkit과 실험하여 비교하였을 때 오탐율이 8% 높지만, 존재하는 취약점을 모두 탐지해냈다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.47-53
• /
• 2007

The laminar combustion characteristics of interacting coal particles in a convective flow are numerically investigated at particle arrangement and size difference. The numerical simulations, which use the two-step global reaction model to account for the surrounding gas effect, show the detailed interaction among the inter-space particles, undergoing devolatilization and subsequent char burning. Several parametric studies, which include the effect of the gas temperature (1700 K), high pressure(10 atm) and variation in geometrical arrangement of the particle diameter on the volatile release rate and the char combustion rate, have been carried out. The comparison indicates that the shift to the multiple particle arrangement resulted in the substantial change of the combustion characteristics and that the volatile release rate of the interacting coal particles exhibits a strong dependency on the particle spacing and size difference.

• ETRI Journal
• /
• 제22권3호
• /
• pp.10-18
• /
• 2000

Although an n-th order cross-entropy (nCE) error function resolves the incorrect saturation problem of conventional error backpropagation (EBP) algorithm, performance of multilayer perceptrons (MLPs) trained using the nCE function depends heavily on the order of nCE. In this paper, we propose an adaptive learning rate to markedly reduce the sensitivity of MLP performance to the order of nCE. Additionally, we propose to limit error signal values at out-put nodes for stable learning with the adaptive learning rate. Through simulations of handwritten digit recognition and isolated-word recognition tasks, it was verified that the proposed method successfully reduced the performance dependency of MLPs on the nCE order while maintaining advantages of the nCE function.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.202-206
• /
• 2009

Drying characteristics of fresh Korean-type rehmannia (jiwhang) noodle was investigated to determine drying kinetic parameters under the experimental conditions of 5 temperatures (30, 40, 60, 80, and $90^{\circ}C$). Drying curve of the noodle showed a biphasic pattern of decrease in drying rate with initial rapid drying followed by slow dehydration as the progress in drying. In all drying conditions, only falling drying rate period was observed and the drying rate of the noodle was greatly influenced by the drying temperature. The effective diffusion coefficients ($D_{eff}$) were determined by the diffusion model and their temperature dependency was determined using an Arrhenius equation. The activation energy ($E_a$) values for the drying of the noodle were 19.94 and 21.09 kJ/mol at the initial and the latter stage of dehydration, which were comparable to those of pasta or Japanese udong dehydration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1058-1062
• /
• 1997

Development of laser induced chemical etching technologt with KrF laser are carried out in this study for micromachining of silicon wafer. The paper is devoted to experimental identification of excimer laser induced mechanism of silicon under chlorine pressures(0.02~500torr). Experimental results on pulsed KrF excimer laser etching of silicon in chorine atmosphere are presented. Etching rate dependency on laser fluence and chlorine pressure are discussed on the basis of experimental analysis, it is concluded that accurate digital micro machining process of silicon wafer can achieved by KrF laser induced chemical etching technology.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.167-170
• /
• 2003

The thermal and hydraulic characteristics of the cooling passage for HTS power cable should be carefully investigated to get the highly reliable and economic operation. In this study, the pressure drop and temperature change of the coolant flowing the corrugated passage was estimated using the simple one-dimensional approach, and the temperature distribution in the radial direction was calculated. The results show the dependency of the mass flow rate, thermal conductivities on the cooling performance of the HTS cable.