• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.138-141
• /
• 2015

K-water operates many Water Treatment Plants(WTP) to supply clean water to people. There are automation process control equipments collecting data at each step in WTP. The data collected is big enough to 370,000Tag/min from the K-water Water Treatment Plants. In the past, this big data was not important, we focused on the operating water purification process using the data. Currently, we increased the importance of attention to take advantage of Big Data. The research about the accident reduction and efficiency improvement in WTP are ongoing by data collection and analysis. In this paper, we analyzed the flow rate, power and pressure obtained in the accident case in WTP. We researched the methods for accident prediction and reduction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.166-174
• /
• 2014

Fuel injection pressure has steadily increased in diesel engines for the purpose of improving fuel efficiency and cleaning exhaust gas, but it has now reached a point, where the cost for higher pressure does not warrant additional gains. Common rail systems on modern diesel engines have fuel pumps that are mechanically driven by crankshaft. The pumps actually house two pumping module inside: a low pressure pump component and a high pressure pump component. Part of the fuel compressed by the low pressure component returns to the tank in the process of maintaining the pressure in the common rail. Since the returning fuel represents pumping loss, fuel economy improves if the returned fuel can be eliminated by using a properly controled electrical fuel pump. As the first step in developing an electrical fuel pump the fuel supply system on a 6 liter diesel engine was modeled with AMESim to analyze the workload and the fuel feed rate of the injection pump, and the results served as basis for selecting a suitable servo motor and a reducer to drive the pump. A motor controller was built using a DSP and a program which controls the common rail pressure using a proportional control method based on the target fuel pressure information from the engine ECU. A test rig to evaluate performance of the fuel pump is implemented and used to show that the newly developed electrically driven fuel pump can satisfy the fuel flow demand of the engine under various operating conditions when the rotational speed of the pump is adequately controlled.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2005.06a
• /
• pp.230-232
• /
• 2005

The formation of insoluble aggregation of the recombinant kringle fragment of human apolipoprotein(a), rhLK8, in endoplasmic reticulum was identified as the rate-limiting step in the rhLK8 secretion in Saccharomyces cerevisiae. To analyze the protein secretion pathway, some of yeast genes closely related to protein secretion was rationally selected and their oligomer DNA were arrayed on the chip. The expression profiling of these genes during the induction of rhLK8 in fermentor fed-batch cultures revealed that several foldases including pdi1 gene were up-regulated in the early induction phase, whereas protein transport-related genes were up-regulated in the late induction phase. The coexpression of pdi1 gene increased rhLK8-folding capacity. Hence, the secretion efficiency of rhLK8 in the strain overexpressing pdi1 gene increased by 2-fold comparing in its parental strain. The oligomer DNA chip arrayed with minimum number of the genes selected in this study could be generally applicable to the monitoring system for the heterologous protein secretion and expression in Saccharomyces cerevisiae. With the optimization of fed-batch culture conditions and the alteration of genetic background of host, we obtained extracellular rhLK8 at higher yields than with Pichia pastoris systems, which was a 25-fold increased secretion level of rhLK8 compared to the secretion level at the initiation of this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.595-597
• /
• 2017

Modern people are exposed to obesity problems with convenient lifestyle, over nutrition, and lack of exercise. The greater the desire for longevity, the greater the problem of obesity. People work out in neighborhood parks, walkways, and hiking trails to improve their obesity. The municipal government encourages its residents to provide various exercise information by setting up signs on the promenade or hiking trail. However, conventional exercise signs do not provide various athletic and health information because they are built-in fixed type. Therefore, this study suggests scientific exercise management through smart health screen in accordance with the healthcare IT age. The IT-based smart health screen provides real-time calorie consumption, step count, and heart rate. The systematic and scientific exercise management provided by the smart health screen helps the locals to control the amount of exercise and strength suitable for each individual. In addition, walking without special cost makes it possible to manage health and obesity. We hope that our research will be of little help in resolving obesity.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.297-303
• /
• 1994

The effect of radiation on the steroidogenesis of rat ovary was investigated. For this purpose, female rats aged 7-8 weeks were exposed to a single dose of ${\gamma}$ radiation(320 rad or 800 rad) by the cobalt-60. At fourth(day of the first estrus) and eighth(day of the second estrus) days after irradiation, the concentrations of serum steroid hormones were determined by radioimmunoassays (RIA). The correlation between survival rate(Y) and radiation dose(X) was Y=-0.06X+100(r=0.89, n=10). Lethal dose$(LD)_{50(30)}$ and $LD_{20(30)}$ were 833.33rad and 333.33rad respectively. The weights of body and ovary was decreased significantly by the $LD_{50(30)}$ irradiation during the 4 days, but both weights were recovered at day 8. The serum levels of 17a-hydroxyprogesterone(170HP) and estradiol($E_2$) in the irradiated rats were not generally different from those of control. However, the levels of testosterone(T) and 19-norterstosterone(19NT) in the irradiated rat at $LD_{50(30)}$ and $LD_{20(30)}$ radiation doses were decreased, while progesterone levels in serum of the irradiated rats were slightly increased. These results suggest that irradiation may inhibit the first step of steroidogenesis, especially the conversion of P to T, in the rat ovary.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.2
• /
• pp.37-49
• /
• 2008

In this study, we experimented the influence of three herbal medicines, which are Saussurea lappa Clarke, Poncirus trifoliata Rafin, Citrus aurantium Linne, which are called 'Yigiyak(理氣藥)' on drug metabolizing enzyme cytochrome P450 3A4 in Human Liver Microsome. Above all, the reason for this study is that herbal medicines can be assumed that herbs might have interactions with drugs, other herbs, alcohol and chemicals whether those are much better synergy effects than expected effects when the medicine was treated alone or not. As a result, we showed that all of five traditional herbal medicines had no CYP 3A4 inhibition effect on 10, 20, 30, 40, $50{\mu}g/m{\ell}$ doses in Human Liver Microsome even Saussurea lappa Clarke showed a little inhibition as about 93% and 79% inhibition rate of control. However, this result are mostly not enough to prove that SLC has a CYP 3A4 inhibition effect. Moreover, it is not that those rates showed that those herbal medicines have CYP 3A4 induction effect. In conclusion, the result could support that those herbal medicines are more safe than chemical drugs even if this is the basic step to prove that result. Therefore, more specific studies to support this result, which are Kinetic study, cell and animal study then finally until clinical research, are required.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.112-121
• /
• 2010

Distributed video coding is a coding paradigm that allows complexity to be shared between encoder and decoder, in contrast with conventional video coding. We propose that complexity balancing method of encoder/decoder by phase motion estimation algorithm. The encoder performs partial motion estimation. The result of the partial motion estimation is transferred to the decoder, and the decoder performs motion estimation within the narrow range. When the encoder can afford some complexity, complexity balancing is possible. The method proposed is able to know relativity between complexity balancing and coding efficiency. The coding efficiency increase rate by the encoder complexity increases is higher than that by the decoder complexity increases. The proposed method can control the complexity and coding efficiency according to devices' resources and channel conditions.

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.1-6
• /
• 2005

To control forest fire effectively, it is necessary to understand forest fire behavior and relevance to forest fire environmental factors. In this paper, the behavior characteristics of the 2005 Yangyang forest fire were analyzed into the spread patterns and severity grades. The spread processes of the forest fire could be divided into two steps. At the first step, the fire ran fast to the east due to the strong west wind and then spreaded out in irregular direction. The maximum spread rate of the fire was 1.21km/hr and the mean was 0.65 km/hr. The result of the fire severity classification indicated that about $80\%$(1,110ha) of the whole study site was extremely burned and the remaining $15\%(211 ha)\;and\;5\%(61 ha)$ were damaged slightly and moderately respectively.

• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.