• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.418-424
• /
• 2015

The chemical response of energetic materials is analyzed in terms of 1) the thermal decomposition under the thermal stimulus and 2) the reactive flow upon the mechanical impact, both of which give rise to an exothermic thermal runaway or an explosion. The present study aims at building a set of chemical kinetics that can precisely model both thermal and impact initiation of a heavily aluminized cyclotrimethylene-trinitramine (RDX) which contains 35% of aluminum. For a thermal decomposition model, the differential scanning calorimetry (DSC) measurement is used together with the Friedman isoconversional method for defining the frequency factor and activation energy in the form of Arrhenius rate law that are extracted from the evolution of product mass fraction. As for modelling the impact response, a series of unconfined rate stick data are used to construct the size effect curve which represents the relationship between detonation velocity and inverse radius of the sample. For validation of the modeled results, a cook-off test and a pressure chamber test are used to compare the predicted chemical response of the aluminized RDX that is either thermally or mechanically loaded.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.296-303
• /
• 2001

In nuclear power steam generators, high flow rates can induce vibration of the tubes resulting in fretting wear damage due to contacts between the tubes and their supports. In this paper the fretting wear tests and the sliding wear tests were performed using the steam generator tube materials of Inconel 690 against STS 304. Sliding tests with the pin-on-disk type tribometer were done under various applied loads and sliding speeds at air and water environment. Fretting tests were done under various vibrating amplitudes, applied normal loads and various temperatures. From the results of sliding and fretting wear tests, the wear of Inconel 690 can be predictable using the work rate model. Depending on normal loads and vibrating amplitudes, distinctively different wear mechanisms and often drastically different wear rates can occur. At room temperature, the wear coefficient K of Inconel 690 is 7.57${\times}$10$\^$13/Pa$\^$1/ in air and it is 1.93${\times}$10$\^$13/Pa$\^$1/ in water. At room temperature, it is found that the wear volume in air is more than in water. In water, the wear coefficient K at 50$^{\circ}C$ and 80$^{\circ}C$ is 4.35${\times}$10$\^$-13/Pa$^1$ and 5.81${\times}$10$\^$-13/Pa$^1$ respectively, Therefore, it is found that the wear volume extremely increases by increasing on temperature in water. This study shows that the dissolved oxygen with temperature increment increases and the wear due to fluidity is severe.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.129-139
• /
• 2014

This study supplements the limitation as much as possible that existing literatures have, and, on the target of new registered businesses to KOSDAQ, this study presents answers to the worries raised earlier by recovering problems on causal relationship direction between foreigner investment and dividend level and by analyzing them with dividend level as an independent variable. First, with the whole samples used, dividend income rate didn't show significant relationship with foreigners' investments. It is similar to study result of the existing literature. A panel analysis, on the target of sample businesses that paid dividends before foreigners' investments originated, showed that foreigners' investments didn't have a significant effect on dividend rate. It means that foreigner investors don't have an effect on dividend level. But, a panel analysis of samples shows that foreigner investments have a significant thesis relationship with dividend level variable, that is dividend return rate, except the businesses which paid dividend before foreigners' investments originated. It means that in case foreign investors' preference is controlled, in the businesses which pay dividends, foreign investors have a significant effect on dividend level to native KOSDAQ. Especially, this study result is very significant, for it shows that dividend return rate, insignificant in existing studies, was significant when foreigners' preferences to the businesses which pay dividends was controlled. It means that the more foreigners' shares increase, the more relative importance of dividend out of all profits increases, compared with all of the amounts at the time, and that foreign investors stick to short-term profit and induce big dividend.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.309-316
• /
• 2003

Generally, sesame are dried on the field after being harvested in Korea. Since harvesting season is rainy autumn and sesame drying is mainly affected sun and natural wind, it is difficult to dry sesame in time. Moreover, sesame threshing by hand is very laborious work. Therefore, tractor mounted sesame thresher which threshes sesame bundles fed in upside down and conveyed along threshing bar was developed to mechanize sesame threshing and to reduce labor cost in this research. the thresher was equipped with a threshing bar which beats sesame bundles and a three layer sieve which screens sesame. The results are summarized as follows ; 1 The sesame thresher was consisted of a hitting-stick, a feeding chain conveyor, a threshing bar, conveyor belt, and the three-layer shaking sieve. 2. In threshing test, prototype thresher showed maximum threshing ratio 98.5%, 98.7% at 14, 17 cpm beating rate respectively. 3. In screening test, prototype sieve showed maximum threshing ratio 97.2% at 12$^{\circ}$ of inclined angle and 220 cpm of sieve vibrating rate. 4. Prototype showed 98.7% of threshing ratio, 1.3% of threshing loss, 97.0% of screening ratio, 0.7% of screening loss on the rest condition of 15 sesame bundles/min of feeding rate, 14 cpm of beating rate, 220 cpm of sieve vibrating rate. 5. The working performance of prototype was 0.5hr/10a. It was 9.6 times more efficient than manual work. And, operation cost of prototype was saved by 45.9% compared to manual work.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.2
• /
• pp.143-154
• /
• 1998

The purpose of this research is to suggest basic materials for the practical infection precaution program to protect health care workers from hospital infection by grasping their compliance level of Universal Precautions and examining the factors affecting them. The number of the health care workers we studied were 486, including the doctors, the nurses, and the lab technicians who were working in a university hospital. The period of this research was from Aug. 18th, 1997 to Aug. 30th, 1997. The method of the study was to measure the compliance level of Universal Precautions with the item of "Universal Precautions" established by CDC in 1987, and examine the questionnaire of 52 questions dividing related factors into socio-populational, individual, socio-psychological and organizational management ones. The data was analyzed by t-test. ANOVA, and chi-square test. The results were as follows : 1. An the compliance level of Universal Precautions, hand washing had the highest score(85.4%), and doctors(18.9%), nurses(44.0%), and lab technicians(7.6%), had a low compliance level in the safe handling of an injection syringe, and item not to handle patients and their samples when the subject suffered from dermatitis or injury had the lowest score of 17.1%. 23.3% of them said that they wear protection gown, goggles and mask. 2. Female's Compliance level of Universal Precautions Was higher than male. 3. The health care workers who had high recognition on Universal Precautions got significantly higher compliance level of Universal Precautions than those have low recognition on Universal Precautions(P<0.001). 4. The health care workers experienced a needle stick injury had a significantly higher compliance level of Universal Precautions than those who had not(P<0.000). 5. The health care workers who had infection protection education got a significantly higher compliance level of Universal Precautions than those who didn't(P<0.000). 6. The health care workers who had a firm belief in the effect of Universal Precautions got a higher compliance level of Universal Precautions than those who didn't. 7. The health care workers who had less conflicts between treating patient arid protecting them-selves got a higher compliance level of Universal Precautions than others with many conflicts. 8. The health care workers who had a high score in organizational management factors got a significantly higher compliance level of Universal Precautions than those with a low score(P<0.000). 9. Only 16.9 percent of the all respondents(82 in number) answered that they knew well or a little about the Universal Precautions, which is very low rate of recognition. 10. The variables which affected the score in organizational management factors were age, sex, education period, work experience, the kind of work, recognition on Universal Precautions, the experience of needle stick injury, revealing dangerous circumstance related to infection, and training on precaution again infection. According to the result above, compliance level of Universal Precautions showed high correlation with sex, the recognition on Universal Precautions, the experience of needle stick injury, training on precaution against infection, the belief in the effect of Universal Precautions, the recognition degree of conflicts and organizatinal management factors. These results could be used as the basic materials for the developing infection protection programs. Also, There should have a systematic training course to elevate a effective compliance level of Universal Precautions as well as the manageeent of infection protection programs.

• Korean journal of applied entomology
• /
• v.12 no.1
• /
• pp.23-27
• /
• 1973

In an effort to find effective inoculation method of Fusarium nivale, this experiment was conducted. The results obtained are summarized as follows: (1) Distilled water-spore suspension of this fungus was inoculated on rice seedling and the result showed that negligible disease symptoms were observed when the inoculated plants were placed in a moist chamber for one day, whereas considerable symptoms were indicated when kept for two days. (2) After giving physical wounds by wind or wooden stick to the rice seedling, distilled water-spore suspenion was sprayed on them and considerable diseased spots were formed. (3) Sufficient disease occurrence was due to the addition of $1\%$ rice leaf extract, glucose, polypeptone, and yeast extract solution to the spore suspension. (4) In distilled water, spore germination was poor, while in nutrient added solution good germination rate as well as anastomosis was found. (5) A new rice variety Tong-il turned out to be more susceptible to Fusarium nivale than Pung-kwang.

• Journal of fish pathology
• /
• v.25 no.1
• /
• pp.47-58
• /
• 2012

Behavioral and physiological responses of juvenile red seabream (Pagrus major) to different concentrations of ethanol were investigated. No swimming and no reaction to touching by a wooden stick was observed at 0.6% ethanol group in behavioral response, and survival rate was 100% after 5 hours of treatment. Red blood cell count, hematocrit and hemoglobin levels in plasma were not significantly different among all groups. AST activities in plasma significantly decreased as ethanol concentration increased. On the contrary, ALT activities in plasma significantly increased as ethanol concentration increased. Cortisol level in plasma was the lowest in 0.6% ethanol group. Glucose levels in plasma increased significantly when ethanol concentration increased more than 0.4%. Oxygen consumption of fish in 0.6% ethanol seawater was constantly lower than that of fish in control seawater from 2 hours after the exposure to ethanol seawater until the end of experiment.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.432-439
• /
• 2003

Inconel 690 for nuclear steam generator tube has more Chromium than the conventionally used Inconel 600 in order to increase the corrosion resistance. To evaluate the tribological characteristics of Inconel 690 under fretting condition the fretting tests were carried out in air and elevated temperature water. Fretting tests of the cross-cylinder type were done under various vibrating amplitudes and applied normal loads in order to measure the friction forces and wear volumes. From the results of fretting wear tests. the wear of Inconel 690 can be predictable using the work rate model. The amounts of friction forces were proportional to relative movement between two fretting surfaces. The friction coefficients were decreased as increasing the normal loads and deceasing the vibrating amplitudes. Depending on fretting environment, distinctively different wear mechanisms and often drastically different wear rates can occur It was found that the fretting wearfactors in air and water at 2$0^{\circ}C$, 5$0^{\circ}C$, and 8$0^{\circ}C$ were 7.38 $\times$ $10^{-13}$$Pa^{-1}$, 2.12 $\times$$10^{-13}$$Pa^{-1}$, 3.34$\times$$10^{-13}$$Pa^{-1}$and 5.21$\times$$10^{-13}$$Pa^{-1}$, respectively flexibility to model response data with multiple local extreme. In this study, metamodeling techniques are adopted to carry out the shape optimization of a funnel of Cathode Ray Tube, which finds the shape minimizing the local maximum principal stress. Optimum designs using two metamodels are compared and proper metamodel is recommended based on this research.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.1
• /
• pp.44-47
• /
• 2005

Objective: The purpose of this study is to investigate the elevated blood glucose levels in the postoperative period are associated with an increased risk of deep wound infection in diabetic individuals undergoing lumbar spine surgery. Methods: Of 2896 patients who underwent lumbar spine operations by one surgeon between 1993 and 2002, 329(11.4%) were diabetics. The rate of deep wound infections in diabetic patients was 6.4%, versus 3.2% for nondiabetics. 152 patients had their operation before implementation of the protocol and 177 after implementation. Charts of the diabetic patients were reviewed. Mean blood glucose levels were calculated from documented results of finger-stick glucometer testing. Results: Twenty-one diabetic patients suffered deep wound infection. Infected diabetic patients had a higher mean blood glucose level through the first 2 postoperative days than noninfected patients($230{\pm}6.9$ versus $175{\pm}3.8mg/dL$; p<0.003) and had a long operation time($216{\pm}57.9$ versus $167.5{\pm}42.2$ minute; p<0.05). Multivariable logistic regression showed that mean blood glucose level for the first 2 postoperative days, long operation time, and use of the instrumentation(p<0.02) were all related predictiors of deep wound infection. Institution of a protocol of postoperative continuous intravenous insulin to maintain blood glucose level less than 200mg/dL was began in september 1997. This protocol resulted in a decrease in blood glucose levels for the first 2 postoperative days and a concomitant decrease in the proportion of patients with deep wound infection, from 8.3%(11/132) to 5.1%(10/195) (p<0.02). Conclusion: The incidence of deep wound infection in diabetic patients is reduced after implementation of a protocol to maintain mean blood glucose level less than 200mg/dL in the immediate postoperative period.