• Title/Summary/Keyword: Rate Law

Search Result 1,203, Processing Time 0.029 seconds

Flow Behavior of Sweet Potato Starch in Mixed Sugar Systems

  • Cho, Sun-A;Kim, Bae-Young;Yoo, Byoung-Seung
    • Preventive Nutrition and Food Science
    • /
    • v.13 no.3
    • /
    • pp.249-252
    • /
    • 2008
  • Flow behaviors of sweet potato starch (SPS) pastes (5% w/w) were studied in the presence of various sugars (xylose, glucose, fructose and sucrose) and sugar alcohols (xylitol and sorbitol). The flow properties of SPS-sugar mixtures were determined from the rheological parameters of power law model. The vane method was also employed for determining yield stresses of SPS-sugar mixtures directly under a controlled low shear rate. At $25^{\circ}C$ all the samples showed shear-thinning behaviors ($n=0.35{\sim}0.44$) with yield stress. The consistency index (K) values of SPS-sugar mixtures increased in the following order: sorbitol> xylitol> control (no sugar)> sucrose> fructose> glucose> xylose, showing that the addition of sugar alcohols enhanced the K values. The yield stress values were reduced in the presence of ugars and sugar alcohols and they also increased with an increase in swelling power of starch granules in the SPS-sugar mixture systems.

A Study on Verification for the Design of Bio Safety Level 3 Laboratory by using Multi-zone Simulation (멀티죤 시뮬레이션을 이용한 생물안전 3등급(BSL3)시설의 설계 검증에 관한 연구)

  • Lee, Hyun-Woo;Choi, Sang-Gon;Hong, Jin-Kwan
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.21 no.12
    • /
    • pp.671-677
    • /
    • 2009
  • In Korea, since the implementation of the LMO Law, the interest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. is performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab,(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios is carried out in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

A Case Study on Airport Concession Contract of Korean Hotels and Arbitration Award (우리나라 호텔기업의 공항 컨세션 계약과 중재판정 사례연구)

  • Kim Ki-Hong;Byun Joon-Young
    • Journal of Arbitration Studies
    • /
    • v.14 no.1
    • /
    • pp.245-272
    • /
    • 2004
  • This study is focused on the cases that Korean hotels stepped into international airports, public facilities, and successfully solved the contract related disputes by using arbitration in accordance with arbitration law. This case study on arbitration derives the hotel management strategy points as follow: 1. It must be a good chance for a famed hotel to step into international airports that have big publication effect. The feasibility study focused on marketing feasibility rather than finance feasibility may, however, not be good. 2. Written contract is required in entering into a contract with government organizations. However, oral contract still exists. 3. If the contract is made to always pay the higher amount between annual minimal guarantee and sales rate in expenses of store using charge, such contract shall cause very hard sales environment from the initial stage of the contract. 4. The airports have made optional contracts for national service. Such optional contracts are, however, not free from public criticism. 5. This case study is the first case study on arbitration applied to hotels. This study shall be, therefore, frequently referred to in setting a management strategy of hotels that want to run restaurants in another facility outside themselves.

  • PDF

The Approach Method of Community-based Cancer Screening Program in Japan (일본의 지역사회 암 조기 검진사업에 관한 접근 방안)

  • Kim, Yeong-Bok
    • Journal of Korea Association of Health Promotion
    • /
    • v.3 no.2
    • /
    • pp.137-146
    • /
    • 2005
  • The Community based cancer screening program passed in 1960 was a milestone for initiating a national and local health program in Japan. And since then local governments and Cancer Society have been developing and providing cancer screening programs of Stomach, Cervix, Breast and Colorectum for population. To apply the effectiveness of community based cancer screening program, it is important to understand the key issue related to cancer screening participation of population and technology of cancer detection. The purpose of this study was to understand the community based cancer screening program in Japan, and to apply the information for establishment of community based cancer screening program in Korea. The characteristics of community based cancer screening program in Japan were as follows. The first, community based cancer screening program was implemented by the National Health and Medical Services Law for the Aged since 1983. The second, Cancer Society and Cancer Detection Center were core for cancer screening program. The third, the budget for cancer screening program was established by the National Health and Hygiene. The fourth, the continuous quality control for medical staff was provided by Cancer Society and Cancer Detection Center The fifth, the efforts for the promotion of cancer screening rate.

  • PDF

An analysis of the Physical Features for the disabled of Civic Service Offices in the City of Daegu (지체장애인의 편의증진을 위한 동사무소 물리적 환경 분석 및 개선방안)

  • Lee, Jung-Hoon;Kim, Hyoun-Joo;Kim, Sung-Hwa;Choi, Moo-Hyuck
    • Korean Institute of Interior Design Journal
    • /
    • v.15 no.2 s.55
    • /
    • pp.108-117
    • /
    • 2006
  • This study is to promote barrier-free environment to accommodate the request and the need for accessibility and convenience of disabled people including pregnant women, children and the elderly in using civic service offices which are supposed to play a role as community centers. This study researches the current state of facilities for convenience and analyzes the result according to the type of reasons which prevent disabled persons to get the accessibility and convenience for the information as well as the facilities. Sample cases are 15 civic service offices which are newly built after 1998 in the city of Daegu. There are found three types of problems about convenient facilities, which are the first cases with facilities not installed, the second cases with facilities not properly installed according to the rule, and the third cases with facilities installed properly according to the rule but inconvenient for the actual use. This study proposes a more critical process for the building permit to promote the rate of proper installation of convenience facilities, and the supplementary law with more specific regulations to improve the physical environment for the actual use of physically disabled people.

The Effect of Hygrothermal Aging on the Properties of Epoxy Resin

  • Wang, Youyuan;Liu, Yu;Xiao, Kun;Wang, Can;Zhang, Zhanxi
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.892-901
    • /
    • 2018
  • Because of excellent electrical properties, epoxy resin is widely used in packaging and casting power equipment. Moisture and temperature in the environment are inclined to seriously affect the insulation tolerance of epoxy resin. This work focuses on the aging characteristics of epoxy resin in hygrothermal environment. Scanning electron microscopy images show that there are micro-crack, micro-slit and holes inside aged samples. The moisture absorption process undergoes three equilibrium stages and it does not follow the Fick's second law. Observing the change of hydrogen bonds in the infrared spectra of the dried samples, it is found that chemically moisture absorption immerges when the physical moisture absorption entered the third equilibrium stage. By Debye equation to fit the imaginary part of the dielectric constant, it is concluded that the uniformity of water molecule has a great influence on the electrical conductivity loss. Furthermore, the polarization loss can be more easily affected by water molecules than small free molecules. After the aged samples being dried, their real and imaginary part of the dielectric constant descend, but their original electrical properties cannot completely restored. After chemical moisture absorption appears inside the material, the residual space charges increase significantly and the charge dissipation rate slow down obviously.

Basic Research on Evaluation of Defect Repair Period of Finishing Works in Apartment Houses according to Performance Data (실적자료에 의한 공동주택 마감공사의 하자보수기간의 적절성 평가 기초연구)

  • Kim, Dae-gil;Lee, Ung-Kyun;Seo, Deok-Seok
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2015.05a
    • /
    • pp.245-246
    • /
    • 2015
  • Cases of lawsuit and conflict are increasing because of defects in apartments in use after the completion of construction. Further, with changes in the consciousness of residents and in the social environment, many residents are showing interest in defect-related lawsuits. However, the term of warranty liability defined in the current law is not practically appropriate, and the verification of the determination of the term of warranty liability is insufficient. Against this background, this research aims to evaluate the appropriateness of defect repair periods by examining the actual defect condition of the finishing work among the various defects related to apartments. Collected performance data are analyzed by statistical techniques by considering the defect occurrence rate per construction type and the construction year of the finishing work in apartment construction. The analysis results will be used as basic data for evaluating the appropriateness of the standards for the term finishing works warranty liability.

  • PDF

Stoichiometric Solvation Effects. Solvolysis of Trifluoromethanesulfonyl Chloride

  • Koo, In-Sun;Yang, Ki-Yull;Park, Jong-Kuen;Woo, Mi-Young;Cho, Jun-Mi;Lee, Jong-Pal;Lee, Ik-Choon
    • Bulletin of the Korean Chemical Society
    • /
    • v.26 no.8
    • /
    • pp.1241-1245
    • /
    • 2005
  • Solvolyses of trifluoromethanesulfonyl chloride (TFMSC) in water and in aqueous binary mixtures of acetone, ethanol and methanol are investigated at 25, 35 and 45 ${^{\circ}C}$. The Grunwald-Winstein plot of first-order rate constants for the solvolytic reaction of TFMSC with YCl (based on 2-adamantyl chloride) shows marked dispersions into three separate curves for three aqueous mixtures. The extended Grunwald-Winstein plots for the solvolysis of TFMSC show better correlation. The large negative ${\Delta}S^{\neq}$ and relatively small positive ${\Delta}H^{\neq}$ reveals that the solvolytic reaction proceeds via a typical bimolecular reaction mechanism. The l and m values determined in various solvents are consistent with the proposed mechanism of the general base catalysis $S_AN/S_N2$reaction mechanism for TFMSC solvolyses based on mass law and stoichiometric solvation effect studies.

Study of Optical Tomography for Measurement of Spray Characteristics at High Ambient Pressure (고압 환경에서의 분무 특성 계측을 위한 광학 토모그래피 기법 연구)

  • Cho, Seong-Ho;Im, Ji-Hyuk;Choi, Ho-Yeon;Yoon, Young-Bin
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.13 no.4
    • /
    • pp.36-44
    • /
    • 2009
  • Spray cross-section was measured by the Optical Line Patternator (OLP) and Optical Tomography at high ambient pressure. The laser line beam passed through the spray region, then Mie scattered signal and transmitted light were captured. The measured signal was processed to obtain a distribution of attenuation coefficient in spray cross-section. Beer-Lambert's law and mathematical reconstruction methods were used to reconstruct the distribution of attenuation coefficient. Spray became dense at high pressure and attenuation of scattered signal occurred seriously. OLP method, which uses Mie scattered signal, showed limit in compensating attenuation problem in dense spray region. Optical tomography reconstructed spray cross-section well, from transmission rate of light penetrating spray region.

Comparison Study on Burning and Ignition Characteristics for Single Aluminum and Magnesium Particles (EDB에 의해 부양된 알루미늄과 마그네슘 단일 입자의 점화 및 연소 특성 비교 연구)

  • Lim, Ji-Hwan;Yoon, Woong-Sup
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.311-316
    • /
    • 2010
  • The ignition and the burning characteristics of aluminum and magnesium particles ($30-110{\mu}m$ in diameter) isolated due to electrodynamic levitation were experimentally investigated. The burning time, the ignition delay time, the flame temperature, and the flame diameter were measured. The thermal radiation intensity was measured using the photomultiplier tube and the combustion history was monitored by high-speed cinematography. Two-wavelength pyrometry measured the temperature of the burning particles. The burning times of aluminum particles were measured approximately 5 to 8 times longer than those of magnesium particles. Exponents of $D^n$-law, for the burning rate of magnesium and aluminum particles of diameters less than $110{\mu}m$, are found to be 0.6 and 1.5, respectively. The instant of aluminum ignition is clearly distinguished with the ignition delay time little less than 10 ms, however the burning history of magnesium particle exhibits no distinct instant of the ignition. The ignition delay time of magnesium particle (less than $110{\mu}m$) were approximately shown in the range from 50 to 200 ns. The flame temperatures of single metal particles are lower than the boiling point of the oxide. The nondimensional flame diameters for magnesium are decreased with increasing of the diameter. The nondimensional flame diameters for aluminum are not changed significantly.

  • PDF