• Title/Summary/Keyword: Rate Law

Search Result 1,203, Processing Time 0.034 seconds

Analytical Evaluation of Influent Depending on the Occurrence of Rainfall by Case Study of Wastewater Treatment Facility (하수처리시설 사례 별 강우발생 유무에 따른 유입수 분석 평가)

  • Choi, Langkyu;Chung, Jin Do
    • Journal of Korean Society of Disaster and Security
    • /
    • v.12 no.3
    • /
    • pp.35-49
    • /
    • 2019
  • Currently in 2018, Korea has over 600 operating sewage disposal facilities. The law requires a sewage treatment plant to treat 500 tons or more of water per day, and a small-decentralized sewage treatment facility in a community to treat 50 tons or more to less than 500 tons of water per day. However, most facilities fulfill neither the quantity nor the quality requirements from the original design for such reasons as inflow of rainwater and ground water due to deterioration of pipelines and unauthorized input of wastewater in the pipelines. The research has selected 2 representative cases among the technical diagnosif sewage pipelines in many regions within the country to use it as the baseline of: hourly flowrate and BOD water quality analysis in both clear and rainy days, proper plant operation through inflow rate and ratio calculation, and diagnostic evaluation for deterioration of the pipelines and their accessary structures. This also suggests facilities that treats 500 tons or more of inflow per day to sample and analyze the water hourly for 24 hours once a week in both clear weather and rainy weather considering the influence of rainfall on a regular basis.

Effect of Banded Subsoil Fertilization on the Yields and N Utilization of Radish (Raphanus sativus L.) in Plastic Film Mulching Cultivation (무 재배시 질소이용률 및 수량에 미치는 토중시비 효과)

  • Yang, Chang-Hyu;Yoo, Chul-Hyun;Shin, Bok-Woo;Kang, Seung-Won
    • Korean Journal of Environmental Agriculture
    • /
    • v.24 no.4
    • /
    • pp.398-403
    • /
    • 2005
  • To establish law-put fertilization technique and increase of fertilization efficiency during cultivation of plastic film mulching for plastic the improvement of soil properties, nutrition efficiency and yield by banded subsoil fertilization (BSF) using band spoty applicator was conducted at radish (Raphanus sativus L.) field in Honan Agricultural Research Institute from 1997 to 1998 for 2 years. These results were as follows. T-N, available $P_2O_5$ exchangeable Ca and K contents of soil were increased those of before experiment especially in BSF treatment. Also, the content of soil $NO_3-N$ was higher in BSF as fertilization amount is increasing than in CF (conventional fertilization). Uptake amounts of nitrogen fertilized were high in BSF during overall the growth period of plant and N utilization was high by $21.9{\sim}30.4%$ in BSF compared to in CF. The rate of fertilizer loss by rainfall was largely reduced, because all fertilizer applied was putted around the root zone. The total yields of fresh radish BSF treatments were more increased $13{\sim}37%$ than that of CF treatment.

Effect of Work Intensity on Fit Factor and Affecive Quality of Dustproof Mask (작업 강도가 방진 마스크의 밀착도와 감성품질에 미치는 영향)

  • Lee, Jinsil;Cho, Sunhee;Yun, Jungmin;Kim, Min-Sun;Park, Jaekyu;Choe, Jaeho
    • Journal of Korean Society for Quality Management
    • /
    • v.46 no.2
    • /
    • pp.301-310
    • /
    • 2018
  • Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

A Case Study on the Ventilation and Heat Environment in a Underground Limestone Mine with Rampway (Rampway 설치 석회석 광산내 환기 현황 및 열환경 분석 사례연구)

  • Kim, Doo-Young;Lee, Seung-Ho;Jeong, Kyu-Hong;Lee, Chang-Woo
    • Tunnel and Underground Space
    • /
    • v.22 no.3
    • /
    • pp.163-172
    • /
    • 2012
  • As more diesel engines have been employed in underground limestone mines with large cross section, underground space environment is worsened by diesel exhausts and heat flow. This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow, diesel exhaust gas concentrations and the effects of mechanization and deepening working face on temperature and humidity. Due to the insufficient capacity of the main exhaust fan and poor airway management, stagnant airflows were observed at various locations, while the flow direction was reversed instantly with passing diesel equipment and the flow reversal was also made by the seasonal variation of the outside surface weather. During the loading operation, CO concentration measurements were found to be frequently higher than the threshold limit of 50 ppm, and most of the $NO_2$ measurements during drilling and loading operations shows even more serious levels surpassing the permissible limit of 3 ppm. The actual ventilation quantity was considerably less than the required quantity estimated by the mine health and safety law, and this shortage problem was less serious in colder winter showing more effectiveness of the natural ventilation.

Design and Evaluation of a Flow Rotate Divider for Sampling Runoff Plots. (토양 유실량 및 유출수량 측정을 위한 회전분할집수기의 평가)

  • Zhang, Yong-Seon;Park, Chan-Won;Lee, Gye-Jun;Lee, Jeong-Tae;Jin, Yong-Ik;Hwang, Seon-Woong
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.41 no.6
    • /
    • pp.374-378
    • /
    • 2008
  • For the standard method of collecting the run-off, it is consumed the high cost and much effort to install and to manage this instrument. Because the all the soil and water from reservoir tank must be eliminate after their measurement of amount of soil loss and run-off and installed the reservoir tank at regular size in the experimental field. Therefore, objective of this study was to compare its efficacy between the standard method and a flow rotate divider for ontinuously collecting and measuring the soil loss and run-off in order to conveniently conduct the field experiment of the lysimeters. For collecting the sampling of soil loss and run-off from agricultural land with invariable ratio, a flow rotate divider was consisted with a 8 blades of round plate sloped in order to collect the invariable ratio of soil and water at lowest part from round plate by the law of gravity. For comparing its accuracy in the batch scale experiment, it shown that there was significantly a positive linear corelation ($r=0.997^{***}$) between flowing and sampling amounts with adjusting the range from 1 to $10L\;min^{-1}$ with flowing rate. In collecting ratio in the field experiment, it observed that the more its accuracy had, the more soil loss and run-off.

Sediment Unit Loads from Developing Areas during Storms (개발사업장에서의 강우시 토사 유출원단위 산정)

  • Kim, Cheol Min;Lee, Eun Ju;Lee, So Young;Kim, Young Chol;Kim, Lee Hyung
    • Journal of Wetlands Research
    • /
    • v.10 no.1
    • /
    • pp.59-68
    • /
    • 2008
  • Three phases of development in construction projects (i.e. pre-development, construction and post construction) diversely effect the environment, hydraulics and ecosystem. Currently, the domestic environmental policy is in control of the various environmental hazards produced after completion of development operations. Nevertheless, with the enforcement of water pollution total amount management system, improving the water quality; also the water and ecosystem preservation law recommends enforcing the sediment management for development operations in order to lessen the negative impacts to the environment. Recently, the country is experiencing difficulties in various development project locations due to insufficiency of interpreting the fundamental data for sediment loss and miscalculation of soil loss unit loads of sediment. This research utilizes data from 2000 to 2005 discussing a total of 1,036 environment impact assessment projects gathered from various ministries and offices namely Ministry of Environment (MOE), Ministry of Agriculture, the Office of Forestry, and Ministry of Construction and Transportation. Moreover, quantity of sediment from high land agriculture reports involving contaminant discharge characteristic investigation previously did concerning old land agriculture and So-Yang lake non-point pollution source management area as well as management measured data from MOE. The findings of this study reveal that the highest soil loss rate occurred from mountain district for pre-development and post construction and sports facility during construction.

  • PDF

Determination of Phosphatidylcholine in Korea Functional Foods Containing Lecithins using HPLC with Evaporative Light-Scattering Detector (ELSD) (ELSD를 이용한 레시틴중의 포스파티딜콜린의 분석)

  • Lee Chang-Hee;Bahn Kyeong-Nyeo;Cho Tae-Yong;Lee Ju-Yeon;Lee Young-Ja;Chae Gae Yong
    • Journal of Food Hygiene and Safety
    • /
    • v.20 no.4
    • /
    • pp.267-271
    • /
    • 2005
  • Lecithin is a naturally occurring group of phospholipids found in nearly every living cell and has been widely used as the ingredient of functional foods. Lecithin has high content of phosphatidylcholine(PC), pharmaceutical material which promotes metabolism through the cell membrane. This study was carried out to improve the present inconvenient analytical method of PC in law for health & functional foods. The commodities used in this experiment, were two kinds of egg yolk and eight kinds of soybean lecithin functional foods. PC was separated with isocratic elution with hexane : isopropanol : D.W (30:60:8) through silica column (2.1$\times$150 mm) by HPLC with Evaporative Light-Scattering Detector (ELSD). The flow rate of the eluent was 0.5 ml/mim and infect volume was 10ul. The neubilizer temperature of detector was $60^{\circ}C$, drift tube temperature of that was $75^{\circ}C$ and gas flow was 30 psi. Quantification was carried out by external standardization. Limit of quantification was 0.15ppm. Lecithin contents of egg yolk and soybean Products were > $66\%$ and > $81\%$), respectively. Phosphatidylcholine contents of egg yolk and soybean products were > $74\%$ and > $18\%$, respectively.

Effects of Gas Background Temperature Difference(Emissivity) on OGI(Optical Gas Image) Clarity (가스의 배경 온도 차이(방사율)가 OGI(Optical Gas Image)의 선명도에 미치는 영향)

  • Park, Su-Ri;Han, Sang-Wook;Kim, Byung-Jick;Hong, Cheol-Jae
    • Journal of the Korean Institute of Gas
    • /
    • v.21 no.5
    • /
    • pp.1-8
    • /
    • 2017
  • Currently gas safety management in the industrial field has been done by LDAR as contact method or methane leak detector as non-contact method. But LDAR method requires a lot of man-power and methane leak detector have the limitation of methane only. Therefore the Research on the OGI(optical gas image) has big attention by industry. This research was undertaken to see the effect of background temperature difference of gas cloud on the clarity of OGI. The background temperature control panel was constructed to cool down the background temperature. OGI was taken at the various methane gas ejection rate and the designed temperature difference. The experimental results showed that the OGI(when the temperature difference is $-6^{\circ}C$) is more clear thane the OGI(when the temperature difference is zero). To quantify the clarity difference, MATLAB's RGB analysis method was employed. The RGB value of the OGI at ${\Delta}T-6^{\circ}C$ was 20% lower than the OGI at ${\Delta}T0^{\circ}C$. The clarity difference by T difference can be explained by the total radiation law. When the background temperature of the gas is lower than the air temperature, the radiation energy coming into the OGI lens is increasing. As the energy is increasing, the OGI image becomes clear.

The Changes of Aperture Variation and Hydraulic Conductivity for Compression Variability (압력에 따른 균열 간극변화와 수리전도도 변화 관찰)

  • 채병곤;이철우;정교철;김용제
    • Journal of Soil and Groundwater Environment
    • /
    • v.8 no.4
    • /
    • pp.1-11
    • /
    • 2003
  • In order to measure aperture variation dependent on normal stress and to characterize on relationship between aperture variation and hydraulic conductivity this study measured apertures of rock fractures under a high resolution confocal laser scanning microscope (CLSM) with application of five stages of uniaxial normal stresses. From this method the response of aperture can be continuously characterized on one specimen by different loads of normal stress. The results of measurements showed a rough geometry of fracture bearing non-uniform aperture. They also revealed different values of aperture variations according to the load stages on each position along a fracture due to the fracture roughness. Laboratory permeability tests were also conducted to evaluate the changes of permeability coefficients related to the aperture variations by different loads. The results of permeability tests revealed that the hydraulic conductivity was not reduced at a fixed rate with increase of normal load. Moreover, the rates of aperture variations did not match to those of hydraulic conductivity. The hydraulic conductivity calculated in this study did not follow the cubic law, representing that the parallel plate model is not suitable to express the fracture geometry corresponding to the results of aperture measurements under the CLSM.

The Modern Cultural Heritage Value and Conservation of Documentary Art Records (행정박물의 근대문화유산적 가치와 보존방향)

  • Kang, Dai-Ill
    • Journal of Conservation Science
    • /
    • v.26 no.1
    • /
    • pp.69-76
    • /
    • 2010
  • As the tangible evidence, documentary art records are permanent records to reflect the historical, symbolical, cultural and artistic value. Also, documentary art records are related with mission fulfillment of public institution and it is documentary with administrative, cultural and artistic values as the works of documentary production and application of the administrative image. "The public records management law" was the first time that administration documents were incorporated and in the act No. 3 of administrative records management, the preservation and management system of documentary art records became legislated. The management of documentary art records are difficult to categorize only by the reflect of characteristics or materials. Because documentary art records are collected in many ways and made with materials. It needs to be collected with many informations on basic materials and with the appropriate conservation and management category. Documentary art records do not have lots of demands but the level of consciousness is improving and the possibility of opening to public is increasing for improvement with the right to know. In near future, the documentary art records will be used for the interpretation of historical and cultural preservation and modern cultural heritage could have the value as it is expected. Primarily to prevent deterioration on documentary art records the standard survey card should be made to categorize the damage rate and to check the status on each documentary art records. In addition, establishing a systematic management plan for various documentary art records are needed with the training of professionals for the conservation of documentary art records.