• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.137-142
• /
• 2018

This study aimed to evaluate and verify a process for correcting the extended source-to-imager distance (SID) in portal dosimetry (PD). In this study, eight treatment plans (four volumetric modulated arc therapy and four intensity-modulated radiation therapy plans) at different treatment sites and beam energies were selected for measurement. A Varian PD system with portal dose image prediction (PDIP) was used for the measurement and verification. To verify the integrity of the plan, independent measurements were performed with the MapCHECK device. The predicted and measured fluence were evaluated using the gamma passing rate. The output ratio was defined as the ratio of the absolute dose of the reference SID (100 cm) to that of each SID (120 cm or 140 cm). The measured fluence for each SID was absolutely and relatively compared. The average SID output ratios were 0.687 and 0.518 for 120 SID and 140 SID, respectively; the ratio showed less than 1% agreement with the calculation obtained by using the inverse square law. The resolution of the acquired EPIDs were 0.336, 0.280, and 0.240 for 100, 120, and 140 SID, respectively. The gamma passing rates with PD and MapCHECK exceeded 98% for all treatment plans and SIDs. When autoalignment was performed in PD, the X-offset showed no change, and the Y-offset decreased with increasing SID. The PD-generated PDIP can be used for extended SID without additional correction.

• The Journal of Fisheries Business Administration
• /
• v.49 no.4
• /
• pp.99-108
• /
• 2018

Maintaining a certain level of fisheries production is due to the increase in aquaculture production. In recent years, aquaculture plays an important role in fishery production in Korea. Nevertheless, aquaculture should be carefully managed by regulations because it also causes environmental load which can threat sustainability of aquaculture. For this reason, Korean government has regulated density of culturing facilities with the Fisheries Law and its adjective decrees. The regulatory compliance of fisheries businesses is very low because the criteria for the regulation of the density were not enacted with scientific research. Thus, this research was aimed to obtain scientific criteria for the regulation of oyster aquaculture in Jaran Bay with economic assessment. For this research, we collected the data necessary for the assessment on five investigation points in the bay for two years. With the data, simulation for the growth rate of oyster was performed and the result showed that at least 25.5% of facilities should be reduced. Also, it was revealed that removing 2 long lines would be most beneficial. The NPV of the best measurement was 35,120,300 won and IRR was 11.7%. With this research, the government will gain more accurate regulatory compliance due to the scientific approach. Moreover, fisheries businesses in oyster aquaculture can obtain flexibility to cope with market fluctuation.

• Asia-Pacific Journal of Business
• /
• v.11 no.3
• /
• pp.169-184
• /
• 2020

Purpose - This research is intended to analyze the current status and problems of tax benefits in the R&D sector and suggest ways to improve tax credit for research and manpower development expenses when various countries fiercely develop efforts to enhance national competitiveness through increased investment in R&D Design/methodology/approach - This study will examine the current status of the tax support system for domestic and foreign R&D, and suggest improvement measures to expand research and development activities in the future. Findings - First, a plan may be considered to abolish and perpetuate the sunset deadline for tax credit for research and manpower development expenses as in the case of the United States and Japan. This perpetuation can be a proactive measure to actively support long-term R & D investment in companies facing economic decisions under uncertainty. Second, it should be revised to raise the tax credit rate of large corporations, which are shrinking every year, compared to SMEs, so that both large corporations and SMEs can improve their international competitiveness and secure excellent technologies through R & D. Finally, the target technologies for each new growth engine and source technology should be expanded to various fields, including national cybersecurity enhancement technology, aviation engine technology, carbon emission and global cooling technologies, which are areas of interest in major overseas R&D countries, to help active R&D and investment in these areas. Research implications or Originality - This study can find a contribution in comparing and analyzing the national R&D tax support system and presenting improvement measures at a time when the benefits of tax credit for research and manpower development expenses of large companies are decreasing due to frequent tax law revisions and the government's factors of increasing tax revenues. In addition, recent research and development items and research technologies of foreign countries were analyzed by Nature's top 10 major science and technology issues, and advanced technologies that should be applied to target technology areas by new growth engine and source technology were specifically investigated and presented.

• Journal of dental hygiene science
• /
• v.20 no.4
• /
• pp.187-199
• /
• 2020

Background: Korean dental hygienists perform various tasks under the supervision of dentists in addition to the tasks listed in the law. Many meaningful studies have been conducted to determine the actual tasks of dental hygienists, but these studies did not show common results due to the differences in research methods or designs. Hence, this study aimed to review the reported data on the tasks of dental hygienists in Korea and to clarify them based on a systematic literature review. Methods: For the literature search, the COre, Standard, and Ideal model presented by the National Library of Medicine was referenced. Seven databases were searched for literatures published in Korea, including PubMed, and Google Scholar. Of the 352 studies found using key words, titles, and abstracts, 46 were finally extracted based on the first and second exclusion criteria. After confirming the tasks of Korean dental hygienists in 46 literatures, 136 tasks were listed and calculated as appearance rate in the literature. Results: The most common tasks in 46 studies were fluoride application (67.2%), radiography (65.4%), scaling (65.4%), sealant (60.7%), patient management and counseling (56.7%), tooth-brushing education (52.2%), impression taking with alginate (50.1%), and making temporary crowns (47.9%). The most mentioned tasks of dental hygienists in public health centers were fluoride application (100%), sealant (100%), oral health education (71.4%), public oral health program evaluation (71.4%), school fluoride mouth-rinsing program (71.4%), water fluoridation (57.1%), tooth-brushing education (57.1%), school oral health programs (57.1%), and public elderly oral health programs (57.1%). Conclusion: This study showed that Korean dental hygienists had 136 tasks by reviewing 46 related studies and that the main job of Korean dental hygienists was oral disease prevention including scaling, sealant, and fluoride application.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.126-135
• /
• 2022

Decentralization is a structural characteristic surrounding the allocation of power within an organization and is discussed at the organizational, national and local levels. This study examined the evaluation and decentralization direction of decentralization of public officials to derive problems and development directions of decentralization in Korea. We also derive our decentralization task. The decentralization task is, first, the expansion of autonomy in organization composition. The organization of local governments shall be determined according to the details and amount of local affairs. Second, it is to secure autonomy in personnel management. It is desirable for local governments to handle local gardens and manpower management autonomously rather than central uniform control. However, it is necessary to leave the checks and supervision to the local council, civic groups, and local residents. Third, the expansion of fiscal decentralization. First of all, the tax rate should be determined by ordinance within the scope prescribed by law to expand the autonomous financial authority. Next, it is necessary to expand local finances through the conversion of national taxes to local taxes. Next, it is necessary to expand local income taxes and local consumption taxes. Decentralization requires cooperation between the central and local governments and participation of local residents and stakeholders, breaking away from central unilateral and short-term thinking.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.506-514
• /
• 2022

The method of suppressing recidivism through punishment centered on punishment is showing limitations through criminal policy research in many countries. As an alternative to this, a restorative judicial law aimed at returning criminals to members of society through reconciliation and coordination of community members, victims, and perpetrators is emerging as a paradigm for crime prevention and recidivism. Sweden is a representative welfare state and is confirming positive effects through correction of criminals based on restorative justice. In addition, it has a stable system related to the legal protection welfare system, and maintains a low recidivism rate and social security through scientific and reasonable operation using evidence-based principles in the evaluation and certification process of operating programs. However, research on the legal protection system implemented in advanced welfare and correctional countries, including Sweden, is still insufficient in Korea. Therefore, this study aims to explore the direction of the domestic legal protection system through a review of Swedish criminal policy and legal protection system, and to identify insufficient areas and complementary points of the domestic system to lay the foundation for improving the domestic legal protection welfare system and expanding business.

• Advances in nano research
• /
• v.12 no.2
• /
• pp.185-195
• /
• 2022

Deep learning is another field of artificial intelligence (AI) utilized for computer aided diagnosis (CAD) and image processing in scientific research. Considering numerous mechanical repetitive tasks, reading image slices need time and improper with geographical limits, so the counting of image information is hard due to its strong subjectivity that raise the error ratio in misdiagnosis. Regarding the highest mortality rate of Lung cancer, there is a need for biopsy for determining its class for additional treatment. Deep learning has recently given strong tools in diagnose of lung cancer and making therapeutic regimen. However, identifying the pathological lung cancer's class by CT images in beginning phase because of the absence of powerful AI models and public training data set is difficult. Convolutional Neural Network (CNN) was proposed with its essential function in recognizing the pathological CT images. 472 patients subjected to staging FDG-PET/CT were selected in 2 months prior to surgery or biopsy. CNN was developed and showed the accuracy of 87%, 69%, and 69% in training, validation, and test sets, respectively, for T1-T2 and T3-T4 lung cancer classification. Subsequently, CNN (or deep learning) could improve the CT images' data set, indicating that the application of classifiers is adequate to accomplish better exactness in distinguishing pathological CT images that performs better than few deep learning models, such as ResNet-34, Alex Net, and Dense Net with or without Soft max weights.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.617-631
• /
• 2022

In this paper the viscoelastic responses of four experimental steel-concrete composite beams subjected to highly variable environmental conditions are investigated by means of a finite element (FE) model. Concrete specimens submitted to stepped stress changes are also evaluated to validate the current formulations. Here, two well-known approaches commonly used to solve the viscoelastic constitutive relationship for concrete are employed. The first approach directly solves the integral-type form of the constitutive equation at the macroscopic level, in which aging is included by updating material properties. The second approach is postulated from a rate-type law based on an age-independent Generalized Kelvin rheological model together with Solidification Theory, using a micromechanical based approach. Thus, conceptually both approaches include concrete hardening in two different manners. The aim of this work is to compare and analyze the numerical prediction in terms of long-term deflections of the studied specimens according to both approaches. To accomplish this goal, the performance of several well-known model codes for concrete creep and shrinkage such as ACI 209, CEB-MC90, CEB-MC99, B3, GL 2000 and FIB-2010 are evaluated by means of statistical bias indicators. It is shown that both approaches with minor differences acceptably match the long-term experimental deflection and are able to capture complex oscillatory responses due to variable temperature and relative humidity. Nevertheless, the use of an age-independent scheme as proposed by Solidification Theory may be computationally more advantageous.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.80-88
• /
• 2022

The Korean nuclear industry had developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code, which adopts a two-fluid, three-field model that is comprised of gas, continuous liquid and droplet fields and has the capability to simulate three-dimensional models. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for the accident management plan of a nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification is required for the separate and integral effect experiments. Therefore, the goal of this work is to verify the calculation capability of the SPACE code for multiple failure accidents. For this purpose, an experiment was conducted to simulate a Control Element Drive Mechanism (CEDM) break with a safety injection failure using the ATLAS test facility, which is operated by Korea Atomic Energy Research Institute (KAERI). This experiment focused on the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The results of the overall system transient response using the SPACE code showed similar trends with the experimental results for parameters such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it can be concluded that the SPACE code has sufficient capability to simulate a CEDM break with a safety injection failure accident.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.206-214
• /
• 2022

Background: This study analyzed the practice of dental medical dispute prevention rules of dental hygienists to present an improvement plan for improving perceived importance and practice and provide data for the development of effective medical dispute prevention programs. Methods: A self-administered questionnaire survey was conducted targeting dental hygienists who were providing assistance at dental hospitals and dental clinics in Seoul and Gyeonggi-do regions from March 22 to April 28, 2022. The questionnaire collected from 273 dental hygienists consisted of eight questions on general characteristics, 30 questions on medical dispute experience, and 14 questions on medical dispute prevention. Results: Complaints showed a high experience rate in 'Consultation & reservation', medical disputes in 'Patient handling (unkind) related', and 'Prosthesis installation and cement removal'. In both the importance and practice of medical dispute prevention rules, 'Preservation of medical records and other medical-related data' was high, and 'Management of patients on standby for a long time' was low in terms of practice. 'Lack of time' and 'Lack of manpower' were cited as reasons for not resolving dental treatment disputes. The importance of dental dispute prevention rules was found to be significant according to age and position, and it was also found to affect the level of practice. Conclusion: Seventy-six-point six percent of the respondents said that education on the prevention of medical disputes was necessary, although they lacked recognition of prevention rules compared to their perceptions and experiences. This study suggested specifying prevention rules in dental hygiene subjects and expanding education, improvement of dental treatment system, revise the law on the range of work to improve the recognition and practice of prevention rules.