• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.361-363
• /
• 2019

공용냉장고에서 도난 및 방치는 꾸준히 발생하고 있지만, 이에 대한 대처는 개인의 양심에 맡기거나 냉장고에 열쇠를 달아 사용자가 번거롭게 열쇠를 가지고 다녀야 하는 불편함이 있다. 이 문제를 해결하기 위해 냉장고에 Raspberry Pi, Push-Pull Solenoid, Touchscreen Display 및 Camera 를 장착하고, 웹사이트를 통해 비밀번호를 설정하여 냉장고를 허가된 특정 사용자만 사용하게 하고, 어떤 사용자가 어떤 물품을 보관하는지를 확인한다. 보관 기능만을 제공하는 기존의 냉장고와의 차별성과 바코드와 카메라를 통한 방치 및 보관의 효율성을 높이는 냉장고를 제안한다.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.293-300
• /
• 2019

In this paper, an Embedded solution for fast navigation and precise positioning of mobile robots by floor features is introduced. Most of navigation systems tend to require high-performance computing unit and high quality sensor data. They can produce high accuracy navigation systems but have limited application due to their high cost. The introduced navigation system is designed to be a low cost solution for a wide range of applications such as toys, mobile service robots and education. The key design idea of the system is a simple localization approach using line features of the floor and delayed localization strategy using topological map. It differs from typical navigation approaches which usually use Simultaneous Localization and Mapping (SLAM) technique with high latency localization. This navigation system is implemented on single board Raspberry Pi B+ computer which has 1.4 GHz processor and Redone mobile robot which has maximum speed of 1.1 m/s.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.41-46
• /
• 2018

This paper proposes a new method for the number recognition on dot matrix LED display. The proposed method uses morphological processing that dilates dots of numbers and connects the dots into strokes. The size of numbers is normalized using horizontal projection because the gaps of dots are different according to the size of numbers. The numbers are segmented by connected component analysis and finally, template matching method recognizes the segmented numbers. The proposed method is implemented using C language in Raspberry Pi system with a camera module for a real-time image processing. Experiments were conducted by using various dot matrix LED displays. The results show that the proposed method is successful for the number recognition on dot matrix LED display.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.67-72
• /
• 2019

This paper proposes a new method for the recognition of resistor color band using a color segmentation in a HSI color model. The proposed method firstly segments a resistor in a chromatic color as a ROI from a background. Secondly, the color bands of the resistor are segmented by vertical projection profile using both the intensity and the saturation differentiation and finally, it recognizes the colors of the segmented color bands using hue, saturation and intensity values. The final results are the value of the resistor and the names of the recognized color. The proposed method is implemented using C language in Raspberry Pi system with a camera module for a real-time image processing. Experiments were conducted by using various resistor images. The results show that the proposed method is successful for the recognition of resistor color band.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.130-134
• /
• 2020

This paper proposes a new method for the digit recognition on a 7-segment display. The proposed method uses morphological processing that dilates segments of digits and connects them into strokes. The digits are extracted by connected component analysis and finally, template matching method recognizes the extracted digits. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. Experiments were conducted by using various 7-segment LED displays and 7-segment mono LCD displays. The results show that the proposed method is successful for the digit recognition on the 7-segment displays.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.22-26
• /
• 2022

This paper proposes a new method for the recognition of road surface marks and numbers. The proposed method designates a region of interest on the road surface without first detecting a lane. The road surface markings are extracted by location and size using a connection component analysis. Distortion due to the perspective effect is minimized by normalizing the size of the road markings. The road surface marking of the connected component is recognized by matching it with the stored road marking templates. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the recognition of road surface marks and numbers.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.44-49
• /
• 2022

The number of single-person households is increasing worldwide, and among them, the proportion of elderly single-person households is increasing. In the case of elderly single-person households, a significant portion of their leisure time is devoted to watching TV. However, if they fall asleep while watching TV without turning it off, it may be difficult to sleep well due to lights and sounds of TV, which can cause health problems such as depression and reduced immunity. Therefore, in this paper, we propose a system that automatically turns off the TV when a person watching TV falls asleep. Images are collected using the camera installed in front of the TV. Since the posture of a person watching TV varies from a sitting posture to a lying posture, the system is designed to determine whether or not to fall asleep regardless of the posture. In addition, since it becomes difficult to judge eye movements as a person moves away from the TV, a method for extending the judgmentable distance is proposed. The system model was implemented and tested using a Raspberry Pi, a monitor, an infrared sensor, and a camera. Eye movements were judged regardless of sitting or lying position, and the distance between a user and a TV was extended by about 200 cm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1019-1024
• /
• 2019

In this paper, we plan to design and manufacture a new sleeping child check system using image and PIR sensors. Therefore, it plans to implement a system that can prevent in-vehicle accidents that can occur due to presence of human and certain temperature inside the vehicle by collecting data from PIR sensors and temperature sensors with the main control device based on Arduino. In addition, the values of sensors can be linked with Bluetooth communication or Wi-Fi communication to send information to the mobile phone, and the sensor values can be printed by texting on the screen. It also plans to use raspberry pie and camera modules to build a display and smartphone streaming service inside the vehicle. Through this, the objective of this study is to prevent safety accidents in school vehicles by making experiments and research in this paper recognize 100% inside the vehicle with the quantitative goal of PIR sensors.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1135-1142
• /
• 2017

In this paper, we propose IoT based smart CCTV security service to prevent crime in blind spot and prevent unexpected fire or danger. In the proposed method, a RC (Radio Control) car is made using Raspberry pie, and a camera and various modules are installed in an RC car. It was then implemented using Raspbian O / S, Apache Web Server, Shell script, Python, PHP, HTML, CSS, Javascript. The RC car provides a security service that informs the manager of the situation by judging the risk of the scene with modules such as video, voice and temperature. Experimental results show that the transmission time of video and audio information is less than 0.1 second. In addition, real-time status transmission was possible in AVG, emergency, and manual mode. It is expected that the proposed method will be applied to the development of smart city by applying it to unmanned vehicles, drones and the like.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1563-1566
• /
• 2015

보안과 관련된 기술이 발전하여 대규모의 장소에 적합한 보안시스템들이 많이 개발되었다. 특히 CCTV를 이용한 감시카메라의 형태도 다양화되었다. 스마트폰의 어플리케이션이나 웹을 통해서 어디서든 감시할 수도 있어, 이를 통해 보안사고 시에 빠른 대처가 가능하다. 하지만 대규모 시스템이 아닌 경우에는 침입자 발견이 늦고, 뒤늦은 대처로 인해 큰 피해가 발생할 수 있다. 라즈베리파이, 실드 보드 등 기타 하드웨어들을 통하여 침입자를 스스로 감지하여 사용자에게 즉시 알림을 전송함으로써 보안사고에 대한 대처를 빠르고 효율적으로 할 수 있는 보안카메라를 구현하였다. 본 보안 시스템은 소리의 방향을 계산하고 정확한 방향으로의 보정을 통하여 최초 침입자를 인식한다. 이후 이미지트래킹을 통하여 침입자를 추적한다. 무선 네트워크를 이용하기 때문에 네트워크가 지원되는 어느 장소에서든지 사용이 가능하다. 대규모 보안시스템을 설치할 여건이 되기 어려운 작은 공장, 상가, 사무실 등에서 보안시스템으로 사용되면 유용할 것이다. 자세한 개발 내용은 본문에 기술한다.