• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.364-371
• /
• 2014

BACKGROUND: To evaluate the impact of rapid temperature change at spring and the early summer seasons in climate change, we have investigated the physiological response and yield of onion in a greenhouse with thermostat control system. METHODS AND RESULTS: Seedlings of onion(cv. Sunshine) were planted on October 30, 2012 and harvested on May 30, 2013. The used treatments(March-April-May) for a rapid temperature change were T0(control): $6.0-10.4-17.2^{\circ}C$, T1: $6.0-5.4(-5)-17.2^{\circ}C$, T2: $6.0-10.4-22.2(+5)^{\circ}C$ and T3: $6.0-5.4(-5)-22.2(+5)^{\circ}C$. Total yields of bulb within the temperature change as high temperature treatment T2 and control treatment T0 were increased significantly(p<0.05), as compared to the low temperature treatment T1. Low temperature conditions significantly (p<0.05) reduced plant height, SPAD reading, crude protein and fiber etc., as compared to the TO and T2. CONCLUSION: The rapid temperature changes were highly affected by low temperature than high temperature. These results suggest that rapid climate change of future could need systematic standard model for physiological characteristics and yields of onion.

• Preventive Nutrition and Food Science
• /
• v.9 no.3
• /
• pp.213-217
• /
• 2004

We evaluated the possibility of rapid fermentation of anchovy sauce using a commercial protease. The fermentation characteristics were monitored by response surface analysis. The content of total nitrogen was high (around 1 %) with fermentation at 51.7～57.5$^{\circ}C$ after 10.2～16.4 hours, but rapidly decreased at higher temperatures (6$0^{\circ}C$ or over), while the $R^2$ of polynomial equation was 0.9185 (p<0.05). The amino acid content rapidly decreased to approximately 600 mg% and less at high temperature (6$0^{\circ}C$ and over), and the $R^2$ was 0.9578 (p<0.01). The free amino acids were affected more by fermentation time when fermentation temperature was lower, and the $R^2$ for total free amino acids was 0.8496 (p<0.10). The $R^2$ for sweet free amino acids was 0.9144 (p<0.05). According to the results of this study, the optimal conditions for anchovy sauce fermentation were predicted to be 52.5～56.9$^{\circ}C$ and 13.3～16.4 hours, and the predicted values and actual values of each response variable were similar to each other when the fermentation was performed at a random point within the optimal range. Also, the comparison of the quality between the quick anchovy sauce and sauces currently on the market showed that the content of sweet amino acids was higher in the former than in the latter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.53-60
• /
• 2020

In this study, smart precast-in-place concrete, such as continuity with Precast any technology that can be the Application of Building Structures and railway stations, civil structures. After the same way in the field installation design based on the criteria railways and derived the right section, through the Static and Dynamic Response Analysis. Dynamic sensor and the triaxial acceleration measured by attaching the sensor acceleration response according to the extent of the damage of Precast Panel Structures and mode of Precast Structures, by comparing the data. Data for the stability and improvement of the uncertainty in along a railroad and Future of Precast Panel Structures of time to replace. This is to use this data as basic data on damage prediction.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.213-221
• /
• 2024

Purpose: The purpose is to find the optimal way to quickly block the leak in the event of a leak accident in a tank lorry transporting hydrochloric acid aqueous solution, a hazardous chemical, and to carry out effective disaster prevention work to minimize damage caused by the leak. Method: We organized the overall characteristics of hydrochloric acid and accidents that occurred during transportation by accident type and cause, and created a small tank that can be tested assuming a leak situation in a hydrochloric acid tanker, creating an environment similar to the leak situation, and leaking in various ways. I would like to experiment and organize blocking methods. Result: Through experiments, an effective leak blocking method was confirmed. We would like to summarize measures to quickly block a leak in the event of a leak and present the optimal disaster prevention plan that can be applied at the accident site. Conclusion: It has been confirmed that using a combination of adhesive tape and magnets is more effective in blocking leaks. Rapid response is possible by repeatedly training business emergency response teams and product transporters to appropriately select and respond to leak-blocking equipment. Additional research on various leak prevention methods is needed in the future.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.521-531
• /
• 2013

Temporary residence in disaster scenarios emergency response system designed for utilizing emergency incident types identified through the rapid emergency response procedures and proper application of the resulting accident is very important in order to minimize the damage. In this study, emergency disaster expected to analyze the potential for accidents, the possible accident scenarios emergency disaster preparedness These were derived on the basis of temporary residence in the emergency scenario, the scenario for the emergency response and recovery measures were derived. In addition, each event of an emergency response scenario to be taken during the emergency response requirements for emergency response to a step-by-step behavior was defined by the subject. In addition, subject-specific, step-by-step emergency disaster scenarios emergency response is quick and can be done in a comprehensive foundation was laid.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.349-356
• /
• 2012

Eicosanoid mediates various cellular immune responses in insects. This study aimed to discover its novel action on the modulation of hemocyte populations in response to an immune challenge. Upon bacterial challenge, the last instar larvae of the beet armyworm, Spodoptera exigua, increased their total hemocyte density in 2 h, and then decreased it to a basal hemocyte density level. This rapid increase in total hemocyte density was explained by an increase of plasmatocyte and spherulocyte densities. When larvae were treated with dexamethasone (a specific phospholipase $A_2$ ($PLA_2$) inhibitor), they did not show any increase in hemocyte density in response to bacterial challenge. However, the addition of arachidonic acid (a catalytic product of $PLA_2$) to larvae treated with dexamethasone recovered the up-regulation of hemocyte density in response to bacterial infection. Among eicosanoid, cyclooxygenase (COX), but not lipoxygenase (LOX), products seemed to mediate the increase of hemocyte density in response to bacterial infection because naproxene (a COX inhibitor) inhibited the hemocyte density increase, though esculetin (a LOX inhibitor) did not. Prostaglandin $E_2$, a COX product, significantly increased the hemocyte density even without bacterial infection. These results suggest that eicosaniod mediates a rapid increase in total hemocyte density in response to immune challenge.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.498-505
• /
• 2007

Management options for impacted maxillary canines can include (1) continued observation, (2) extraction of the primary canine to aid spontaneous eruption, (3) uncovering and bonding of the impacted tooth and its eruption using orthodontic traction, (4) autotransplantation, and (5) extraction followed by prosthetic replacement. Autotransplantation should be considered when the degree of malposition is too severe to correct by orthodontic alignment. The present report describes the management of an ectopic eruption of the left maxillary canine in an 10-year-old girl. The treatment included the extraction of primary maxillary left canine and the autotransplantation using a Rapid Prototyping model. By using RP model to contour the recipient bone and check for fitting in the prepared socket, the extra-oral time can reduce. The autotransplanted canine showed mobility within normal limit, negative response to percussion and positive to electric pulp test after 6 months.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.174-178
• /
• 2001

In order to reduce the lead-time and cost, recently the technology of rapid protoyping and manufacturing(RPM)has been widely used. Machining process is still considered as one of the effective RPM methods that have been developed and currently available in the industry. It also offers practical advantages such as precision and versatility. Some considerations are still required during the machining process. One of the most important points is fixturing. There should be an effective method of fixturing since the fixturing time depends on the complexity of geometry of the part to be machined. In this paper, the rapid manufacturing process has been developed combining machining with automatic filling. The proposed fixturing technique using automatic filling can be widely applicable to free surface type of product such as a fan. In the filling stage, remeltable material is chosen for the filling process. An automatic set-up device attachable to the table of the machine has also been developed. The device ensures the quality during a series of machining operations. This proposed process has shown to be a useful method to manufacture the required products with the reduced the response-time and cost.

• Korean journal of applied entomology
• /
• v.36 no.3
• /
• pp.249-255
• /
• 1997

The sublethal temperature (5$^{\circ}$C for 2hr) led the fifth instar larvae of beet armyworm, Spodoprern exigucr (Hiibner), to increase cold tolerance to subzero lethal temperatures ( 'rapid cold hardening' ). The strength of rapid cold hardening was, however, varied among different populations which showed different cold tolerance in response to cold temperatures. To analyse the physiological factors affecting the rapid cold hardening, hernolymph osmolalities. supercooling points, glycerol contents, and cold stress proteins were measured by treating the fifth instar larvae with the sublethal low temperatures. The treated larvae showed increase of hemolymph osmolalities and glycerol contents. Changes of the osmolalities were greater in cold-hardy strains than in cold-susceptible strains. The sublethal temperature also induced them to express the cold-stress proteins (I0 - 20kD) in the hemolymph. but did not to change supercooling points.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.146-152
• /
• 1997

A rapid BOD measurement system using a microbial membrane electrode has been developed. Culture of microorganism and the preparation of microbial membrane, the effect of sample flow rate on the BOD measurement, the effect of solution pH and response characteristics of the microbial membrane electrode were investigated. The rapid BOD measurement system developed by us was connected to a personal computer and the whole BOD measurement procedures were carried out automatically. The best results were obtained when the solution flow rate was 7.8mL/min and the data were obtained 5 minutes after sample injection.