• Journal of Environmental Science International
• /
• v.21 no.2
• /
• pp.181-188
• /
• 2012

Salicornia europaea (glasswort) is succulent, annual, halophytic plant mainly distributed throughout reclaimed land or salt marsh. It has strong tolerance to salt so that it plays the part of the pioneer species in the first succession. According to domestic and foreign studies, S. europaea contains plenty of minerals and antioxidant in the body. Since people take note of an availableness of this plant as health diet, the natural growth sites are threatened. In addition to development of salt marsh and sea shore, imprudent harvest has a bad effect to S. europaea population maintenance. To seek ways to preserve the population of this plant, we carried out the continuity of seed germination and restoration test. Seokmo Island, Daebu Island, Youngjong Island and Sudokwon landfill in Korea are selected sites for research. Result of germination continuity shows that most S. europaea seeds germinate on March but no more after July. However the germination was occurred after that time in the greenhouse. So we concluded that no germination after July is a matter of environmental condition not the number of remaining seeds. Also germination was seldom occurred in the spot where seeds production was not happened. In result of continuity test of seed germination by soil depth, germination was occurred vigorously only in top soil. From these results, we note that most S. europaea germinate in the early spring, and germination is finished by July. And this rapid germination speed makes the number of seeds in soil seed bank rare. If a large number of S. europaea in some area are harvested after July, the number of this species will dramatically decrease in that area the following year. In Seokmo Island, we carried out reintroduction experiment by sowing S. europaea seeds. On the first year, a small number of S. europaea settled and they produced seeds successfully. On April 2010, the second year, we observed many S. europaea in seed sowing sites. And we found out that plowing is more efficient than treatment sea water for settlement of S. europaea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.108-126
• /
• 2013

Recently, it becomes essential for firms or nations to forecast the future and identify emerging technologies in order to improve R&D efficiency and gain a competitive advantage. Particularly, the mobile communications industry is characterized by rapid advance and wide application of its technology and thus identifying emerging technologies is more important in the industry than in others. Nevertheless, few attempts have been made to explore its emerging technologies. Therefore, this research aims to develop a methodology to identify the future and emerging technologies especially for the industry and applied it to list top ten emerging technologies for 2020 in the industry. For this purpose, firstly, we focused the key issues in the future targeting 2020 and identified user needs relating to them. Then, candidates of emerging technologies were defined from a set of technologies to meet the needs, for which technological and economic feasibility is assessed to determine their priorities. Finally, the top ten most important technologies were selected and verified. This research is distinct from the previous studies in that it takes a market-pull approach instead of a technology-push approach. The research results are expected to provide valuable information to support strategy- and policy-makings in the mobile communications industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1417-1425
• /
• 2014

The selection of morphologically normal spermatozoa is critical to obtain high breeding performances in boar breeding farms and artificial insemination (AI) centers. Parameters for the selection of semen mainly include total sperm motility, concentration, and morphology. However, these primary parameters are often not reliable for discriminating between normal and abnormal, non-fertilizable spermatozoa. The present study was designed to compare the motion characteristics, fertilization ability using in vitro fertilization (IVF), and acrosome formation of the semen from boars having low (boar number 2012) and normal (boar number 2004 and 2023) breeding performances. The ultimate goal was to identify additional simple and easy criteria for the selection of normal sperm. There was no significant difference between boar 2004 and boar 2023 sperm total motility in computer assisted sperm analysis. However, boar number 2012 semen presented a significantly reduced population of rapid moving spermatozoa and an increased population of slow moving spermatozoa compared to boar numbers 2004 and 2023. Analysis of detailed motion characteristics revealed that sperm from boar number 2012 had significantly reduced motility in progressiveness, average path velocity, straight-line velocity (VSL), curvilinear velocity (VCL), straightness, and linearity. The assessment of the fertilizing ability by IVF also showed that sperm from boar number 2012 showed a fertility rate of 3.4%, whereas sperm from boar number 2023 had a fertility rate of 75.45%. Interestingly, most of the sperm nuclei were found on the peripheral area of the oocytes, suggesting that the sperm from boar number 2012 lacked penetration ability into the oocyte zonapellucida. The acrosome formation analysis using Pisum sativum agglutinin staining demonstrated that the sperm from boar number 2012 had a defect in acrosome formation. Consequently, primary parameters for selecting semen before AI such as motility are not sufficient to select normal and fertilizable spermatozoa. In conclusion, the present study suggests that the acrosome staining and detailed motion characteristics such as progressiveness, VCL, and VSL should be included in determining semen quality together with primary parameters for successful AI and high breeding performance in the swine industry.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.209-215
• /
• 2013

This study is aimed to identify the method to use the CaO-$Al_2O_3$ system of rapidly cooled steel making slag (RCSS) as the environment-friendly inorganic accelerating agent by analyzing its physical and chemical properties. The fraction of rapidly cooled steel making slag is distinguished from its fibrous, and the contents of CaO and $Fe_2O_3$ are inversely proportional across different fractions. In addition, as the content of CaO decreased and the content of $Fe_2O_3$ increased, the loss ignition tended to become negative (-) and the density increased. The pore distribution by mercury intrusion porosimetry is very low as compared to the slowly cooled steel-making slag, which indicates that the internal defect and the microspore rate are remarkably lowered by the rapid cooling. To analyze the major minerals the rapidly cooled steel-making slag, XRD, f-CaO quantification and SEM-EDAX analysis have been performed. The results shows that f-CaO does not exist, and the components are mainly consisted of $C_{12}A_7$ and reactive ${\beta}-C_2S$.

• Biomedical Science Letters
• /
• v.25 no.4
• /
• pp.426-430
• /
• 2019

Currently, molecular diagnostic assays based on nucleic acid amplification tests have been shown to effectively detect mycobacterial infections in various types of specimen, however, variable sensitivity was shown in FFPE samples according to the kind of commercial kit used. The present study therefore used automated PCR-reverse blot hybridization assay (REBA) system, REBA Myco-ID HybREAD 480^®, for the rapid identification of Mycobacterium species in various types of human tissue and compared the conventional one-tube nested-PCR assay for detecting Mycobacterium tuberculosis (MTB). In conventional nested-PCR tests, 25 samples (48%) were MTB positive and 27 samples (52%) were negative. In contrast, when conducted PCR-REBA assay, 11 samples (21%) were MTB positive, 20 samples (39%) were NTM positive, 8 samples (15%) were MTB-NTM double positive, and 13 samples (25%) were negative. To determine the accuracy and reliability of the two molecular diagnostic tests, the one-tube nested-PCR and PCR-REBA assays, were compared with histopathological diagnosis in discordant samples. When conducted nested-PCR assay, 10 samples (59%) were MTB positive and seven samples (41%) were negative. In contrast, when conducted PCR-REBA test, three samples (17%) were MTB positive, 10 samples (59%) were NTM positive and four samples (24%) were negative. In conclusion, the automated PCR-REBA system proved useful to identify Mycobacterium species more rapidly and with higher sensitivity and specificity than the conventional molecular assay, one-tube nested-PCR; it might therefore be the most suitable tool for identifying Mycobacterium species in various types of human tissue for precise and accurate diagnosis of mycobacterial infection.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.435-462
• /
• 2011

Increased attention has worldwide been given to exporting SMEs pursuing the rapid internationalization from their inception. In spite of the limited resources, exporting SMEs have entered in global markets successfully and then improve their internationalization performance. Nevertheless, there is little empirical research regarding internationalization in exporting SMEs, Using a survey of 317 exporting SMEs, this study designated organizational, entrepreneurial, environmental, and technological characteristics as determinants of internationalization performance as well as investigates empirically the relationships among the determinants of internationalization performance, export Support programs of the government, and internationalization performance. According to the results of the study, firstly, R&D capacity, globalization-orientation, international market environment, and technological characteristics (e.g. technological capacity and imitation) have significant effects on international performances. Finally, it is found that export support programs moderated the relationships between market information management, R&D capacity, management capacity, international market information, and technological capacity, and internationalization performance. Above results indicate that if exporting SMEs would not use export support programs effectively, they could not improve internationalization performance. As well, several implications for researchers and practitioners, limitation of this study and future direction were suggested.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2015

Purpose - The ICT market in the EU is lagging behind that of the US; however, algorithm and software development within the EU have grown steadily, and they involve focusing on the creative cultural convergence conceptualized as part of Horizon 2020 and connecting neighboring markets in the EE and the Mediterranean region. It is essential to study the requirements to market the EU's creative ICT development in emerging industrial countries after examining its applicability in these countries. Research design, data, and methodology - This study deals with data pertaining to the EU's creative industry and competitive edge. The global cultural expansion of the EU facilitates a new concept involving not only low-cost IT products to enhance local cultural artifacts through R&D and the construction of efficient infrastructure services, but also information exchange with a realistic commercialization of the technology that can be applied for creative cultural localization. In the European industry, research on algorithms has been applied for the benefit of consumers. We investigated how the process is conducted in the EU. Results - Europe needs to adjust its economic structure to the local culture as part of IT distribution convergence. The convergence has been converted into a production algorithm with IT in the form of low-cost production. This is because there is an attempt to improve the quality of transport infrastructure, workforce availability, and the distribution of the distance to the local industries and consumers, using IT algorithms. Integrated into the manufacturing industry, based on the ICT infrastructure and solutions, smart localized regional clusters are formed with the help of grafting. Europe has own strategy to increase the number of hub-and-spoke cities. Europe is now becoming integrated, with an EPC system for regional cooperation rather than national competition in ICT technology. Europe has also been recognized in this study as changing the step-by-step paradigm for global competitiveness through new creative culture industries. Conclusions - As a result, there are several ways of converging with others through EU R&D intensity; therefore, the EU can be seen as successfully increasing marginal value, which is useful in developing a special industrial cluster or local cultural cities that create converged development by connecting people and objects with IT. In fact, when compared to the US, Europe has a strong culture and the car industries have a tendency to overshadow the IT industries with integration of services in IT distribution. Considering the rapid environmental changes, the convergence of IT services is likely to take place in Europe, similar to the pharmaceutical industry and the automotive industry. This requires a focus on human resources and automated systems management. The trend is to move away from low-wage industries, switched to key personnel centers of the local university-industry. EU emphasizes the creation of IT market demand in Europe involving local cultural convergence for marketing as the second step to strengthen the economic hub-and-spoke areas.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.501-525
• /
• 2009

Recent increase of academic interest in Born Globals has brought abundant researches, which accounts their causes and states, both in and out of the country. However, postulating that types of companies see the different perception of environment of global markets, and this difference will also bring different effects on enterprise capabilities and performance, this study implemented theoretical inquiry and evidential analysis. Technologically innovative SMEs, main subjects of this study, were categorized into Rapid Globals and Gradual Globals according to their internationalization speed, then followed by a CSA. This analysis has shown, regardless of corporate types, early perception of changes in global market environments, affects, in great amount, on marketing and R&D capabilities as well as performance. However, corporate types also showed difference in early perception of changes, marketing and R&D capabilities as well as performance. This evidential analysis provides enterprises pursuing internationalization in early stage with enforcement in their early perception of changes in global market environments.

• Korean small business review
• /
• v.42 no.2
• /
• pp.179-193
• /
• 2020

In the rapid trend of social change, such as the 4th industrial revolution and the realignment of job structures, university-industry cooperation(UIC) is emphasized as a key factor in enhancing national competitiveness. The level of UIC in Korea is insufficient compared to national competitiveness, and despite the world-class R&D investment, there is a lack of linkage between the result of technology development and the industrial field, and the knowledge-transfer between university and industry is also insufficient. This paper analyzed the employment effects of UIC program supported by government, especially youth employment effects. The companies participating in the UIC program showed higher employment effect than the non-participating companies. In addition, the result of examining the employment growth rate of participating companies only for projects aimed at 'education and human resource development', show that employment growth rate after one year (total, youth employment) was significantly higher than that of non-participating companies, while employment growth after two years was not significant. UIC program need to have sustainability and systemicity so that they can be directly linked to the employment effects.

• Korean small business review
• /
• v.42 no.1
• /
• pp.43-56
• /
• 2020

The technology conflict between the U.S. and China is deepening recently. The U.S.-China battle began as a national security issue but is comprehending as a U.S.'s check for China's rapid technological advancement. China is rapidly growing in several indexes including R&D expenditure, patent application, and publications, and is challenging the U.S. in 5G and Artificial Intelligence. In 2018, Huawei became the largest 5G network/equipment provider and second largest smart phone manufacturer in the world. Now, Huawei is outperforming at AI chipset manufacturing, Bigdata analysis and cloud, positioning to become a critical player in the 4th industrial revolution. The purpose of this research is to analyze the effect of recent Huawei issues to Korean SMEs focusing on the relation between Huawei and Korean companies; the cooperation status from the Global Value Chain (GVC) perpsective, and Korean government's policies related to Huawei's information security issues will be the three main frames for the analysis. Then, this research proposes policy implications such as increasing Korea's competitiveness in manufacturing and information security.