• Korean Journal of Oriental Medicine
• /
• v.16 no.3
• /
• pp.33-44
• /
• 2010

Pulse diagnosis is considered one of the most important diagnostic methods in traditional Korean medicine. Nonetheless, there have been troubles of using pulse diagnosis practically, for the lack of its differential standards and standardized terminology. Rapid pulse belongs to the several traditional pulse types. Rapid pulse was first mentioned in the chinese medical book Haungdineijin that matched it to the fever as well as yang in the human body. Meanwhile, chinese doctors in Ming Ching dynasty of China suggested that rapid pulse meant more of the yin, cold-related reaction than yang and fever. In this study, we organized the past arguments of the rapid pulse and went back tracking what biological activities could be possibly linked to the rapid pulse. Thus, we figured out that the inflammatory mechanism has a close connection with the rapid pulse. The definition of the rapid pulse in Haungdineijin was indicating the acute inflammatory response, while in Ming Ching dynasty, it indicated the chronic inflammation. This is the deficiency-excess pattern of the rapid pulse. Furthermore, we discussed the nonexpression pattern of the rapid pulse which could be happened in case of the heat stroke, etc.

• The Korean Journal of Zoology
• /
• v.26 no.2
• /
• pp.95-106
• /
• 1983

Selections for rapid and slow walking behavior were carried out with the populations, drived from Oregon-R and lethal free strain of Drosophila melanogaster. The behavior was measured by means of connected test-tube apparatus. The populations responded effectively to the artificial selection, and it reached the selection plateau after 7 generations. The realized heritability for the first 10 generations was estimated to be about $9\\sim14%$ for the rapid walking behavior, and those for slow walking behavior was about $11\\sim16%$. The results of hybridization analysis between selected populations at generations 8 and 10 indicated that some polygenes showing a slow walking behavior were partially dominant over polygenes controlled rapid trait. The populations selected for rapid and slow walking behavior were relaxed after 10 generations of selection. The response to natural selection of rapid population was completely returned to their neutral states after only 5 generations. Such phenomena would be explained by the genetic homeostasis resulted from an action of natural selection. However, the slow population did not make any difference from walking scores of their original artificial selection. It seems reasonable to assume that the slow walking behavior was possibly controlled by a major gene.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.5-10
• /
• 2000

• Transactions of Materials Processing
• /
• v.11 no.4
• /
• pp.323-331
• /
• 2002

The combination of rapid prototyping(RP) and rapid tooling(RT) has a potential for rapid manufacturing of three-dimensional parts. In the present study, a new RP system transfer type Variable Lamination Manufacturing using Expandable Polystyrene Foam (VLM-ST), is proposed to fabricate net shapes of three-dimensional prototypes. Various three-dimensional parts, such as a knob shape and a human head shape, are manufactured by the VLM-ST apparatus. In addition, a new rapid tooling technology, which utilizes a room temperature vulcanizing (RTV) molding technique and a triple reverse process technique, is proposed to manufacture net shapes of three-dimensional plastic parts using the prototypes of VLM-ST. A plastic part of the knob shape is produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacture of a plastic knob within two days.

• Journal of Trauma and Injury
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2006

Purpose: Hypovolemia is not uncommon among trauma patients in the emergency department (ED). Successful resuscitation of a hypovolemic patient often requires rapid intravenous administration of massive amounts of fluid. A rapid fluid infuser is used in the ED for this purpose, there have been no studies of their clinical uses and effectiveness. We studied clinical experience with a rapid fluid infuser at an urban university hospital in Seoul, Korea. Methods: We reviewed the medical records of 38 patients admitted to the ED with a history of application of a rapid fluid infuser from January 2004 to July 2005. Adult trauma patients older than 15 years of age were included in this study. Clinical data on the patients and the volume of fluid used to achieve a stable blood pressure were extracted from their medical records. Results: The total number of adult trauma patients with a history of application of a rapid fluid infuser from January 2004 to July 2005 in the ED was 16. The mean systolic blood pressure for deciding to apply the rapid fluid infuser was $74.9{\pm}12.7mmHg$. The mean time and volume used to achieve a stable blood pressure were 40.4 min and$2947.3{\pm}1339.2ml$, respectively. In all patients, the amount of fluid infused before using the rapid fluid infuser was between 500 ml and 10,000 ml, compared to 1,000 ml and 6,200 ml with the rapid fluid infuser. The mean amount of fluid per min. via the rapid fluid infuser was 85.5 ml. Vital signs were stabilized in 11 patients, 6 of the 11 were discharged alive. Conclusion: The mean amount of fluid delivered per min. via the rapid fluid infuser was much less than expected; thus, there should be clinical guidelines on volume resuscitation with a rapid fluid infuser in the ED. In the future, prospective, multicenter, clinical-data collection is needed for a more sophisticated study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.309-316
• /
• 2003

Rapid and accurate data processing is required in many GPS(Global Positioning System) applications including surveying. While one can use four different kinds of GPS satellite orbits, we evaluated the accuracy and precision of each kind of orbits to find the best candidate for rapid and accurate data processing. The four different kinds of orbits we: broadcast orbits from GPS satellites; and ultra-rapid orbits, rapid orbits, and precise orbits provided by international GPS data analysis centers such as IGS. With GIPSY and ultra-rapid orbits, we could get the positioning accuracy of 1.5cm from seven days of GPS data. From this study, we conclude that rapid and accurate data processing is achieved with GIPSY and ultra-rapid orbits.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.763-766
• /
• 2000

The Rapid Prototyping and Tooling technology has been developed. However, most commercial ones currently use resins or waxes as the raw materials. These days. the direct metal deposition methods are researched as a true rapid prototyping and tooling technology. A fundamental study on rapid prototyping and tooling with wire welding technology using $CO_2$ laser radiation was carried out in this paper. The main focus is to develop a simple commercial rapid prototyping and tooling system with the exiting laser welding technology. The process is investigated as a function of laser parameters and process variables. Basic parts were fabricated as out-put and their microstructure, hardness and tensile strength are examined for the reliability. In addition, Its advantages and disadvantages are discussed as a rapid prototyping and tooling system.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.20-24
• /
• 2008

Recently, the study for production technology is focused on cycle time reduction as various products are manufactured. In order to manufacture tool and die, rapid prototyping and rapid tooling are researched. Stereolithography apparatus, selective laser sintering, 3D printing, laminated object manufacturing are developed in rapid prototype. The purpose of this study is to develop rapid tooling technology using thermal spray process. This technology is not well-known to korea, but this study will be contributed in development of domestic molds industry through continuous research and development.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.299-307
• /
• 2001

본 연구의 목표는 rapid appraisal의 사용을 통한 지역사회의 건강과 사회적 요구들을 알아내고 이들의 우선순위를 파악하여 지역주민과 써비스 제공자들 사이에 활동계획을 만들기 위함이다. 자료 수집은 Rapid appraisal의 정보피라미드를 통한 primary care team에 의해 3개의 자원들인 지역사회내 기존자료들과 지역 내에서 많이 사용해왔던 반 구조화된 면담지, 방문과 크리닉을 통한 직접 관찰로 자료수집을 하였다. 반 구조화된 면담지는 pilot study하고 검증한 후 사용하였다. 자료수집 대상은 Northern General hospital내에 등록되어진 100가구의 도시영세민 주택에 거주하는 자로 하였다. 결과로 면담자 들과 focus groups은 지역사회 내 지역건강요구들을 만나고 알아내며 건강뿐만이 아닌 사회적인 많은 변화가 요구되는 건강관련 우선순위를 알아내는 첫단계로써 rapid appraisal의 사용이 유용하다. 결론적으로 Rapid appraisal은 지역사회 내 Primary care에서 muti-displinary approach를 촉진하여 건강에 영향하는 다양한 요인사정의 질적인 방법으로 변화를 위한 행동 계획을 세우는데 좋은 평가 방법으로 확인되었다.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.122-127
• /
• 2006

The objective of this research is to determine generally applicable design principles for the development of Rapid mix burner. Details operating RMB(Rapid mix burner) is designed that thermal NOx and prompt NOx formation be reduced through control of low peak flame temperature, and nearly uniform flame temperature by rapid mixing at the ignition point. Results from RMB(Rapid mix burner) achieving lower than 43 ppm NOx emissions and nearly flame temperature uniform