• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.225-232
• /
• 2011

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 ($C_B$=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.53-64
• /
• 2011

The present study considers multi-level approach for the analysis of parametric roll phenomena. Three kinds of computation method, GM variation, impulse response function (IRF), and Rankine panel method, are applied for the multi-level approach. IRF and Rankine panel method are based on the weakly nonlinear formulation which includes nonlinear Froude-Krylov and restoring forces. In the computation result of parametric roll occurrence test in regular waves, IRF and Rankine panel method show similar tendency. Although the GM variation approach predicts the occurrence of parametric roll at twice roll natural frequency, its frequency criteria shows a little difference. Nonlinear roll motion in bichromatic wave is also considered in this study. To prove the unstable roll motion in bichromatic waves, theoretical and numerical approaches are applied. The occurrence of parametric roll is theoretically examined by introducing the quasi-periodic Mathieu equation. Instability criteria are well predicted from stability analysis in theoretical approach. From the Fourier analysis, it has been verified that difference-frequency effects create the unstable roll motion. The occurrence of unstable roll motion in bichromatic wave is also observed in the experiment.

• Journal of Ship and Ocean Technology
• /
• 제4권2호
• /
• pp.1-12
• /
• 2000

The present study concentrates on the weak-scatterer hypothesis for the nonlinear wave-body interaction problems. In this method, the free surface boundary conditions are linearized on the incoming wave profile and the exact body motion is applied. The considered problems are the diffraction problem near a circular cylinder and the ship response in oblique waves. The numerical method of solution is a Rankine panel method. The Rankine panel method of this study adopts the higher-order B spline basis function for the approximation of physical variables. A modified Euler scheme is applied for the time stepping, which has neutral stability. The computational result shows some nonlinear behaviors of disturbance waves and wave forces. Moreover, the ship response shows very close results to experimental data.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.398-409
• /
• 2010

This paper considers the numerical computation of added resistance on ships in the presence of incident waves. As a method of solution, a higher-order Rankine panel method is applied in time domain. The added resistance is evaluated by integrating the second-order pressure on the body surface. Computational results are validated by comparing with experimental data and other computational results on a hemi-sphere, a barge, Wigley hull models, and Series 60 hull, showing very fair agreements. The study is extended to the comparison between Neumann-Kelvin and double-body linearization approaches, and their differences are discussed.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.12-18
• /
• 2001

This study concentrates on the second-order diffraction problem around circular cylinders in multi-frequency waves. The method of solution is a time-domain Rankine panel method which adopts a higher-order approximation for the velocity potential and wave elevation. In the present study, the multiple second-order quadratic transfer functions are extracted from the second-order time signal generated in random waves, and the comparison with other bench-mark test results shows a good agreement. This approach is directly applicable to prediction of nonlinear forces on offshore structures in random ocean.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.338-348
• /
• 2015

In this study, the added resistance of ships in short waves is systematically studied by using two different numerical methods - Rankine panel method and Cartesian grid method – and existing asymptotic and empirical formulae. Analysis of added resistance in short waves has been preconceived as a shortcoming of numerical computation. This study aims to observe such preconception by comparing the computational results, particularly based on two representative three-dimensional methods, and with the existing formulae and experimental data. In the Rankine panel method, a near-field method based on direct pressure integration is adopted. In the Cartesian grid method, the wave-body interaction problem is considered as a multiphase problem, and volume fraction functions are defined in order to identify each phase in a Cartesian grid. The computational results of added resistance in short waves using the two methods are systematically compared with experimental data for several ship models, including S175 containership, KVLCC2 and Series 60 hulls (C_B = 0.7, 0.8). The present study includes the comparison with the established asymptotic and empirical formulae in short waves.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.306-320
• /
• 2010

Modern ultra-large container carriers can be exposed to the unprecedented springing excitation from ocean waves due to their relatively low torsional rigidity. Large deck opening on the deck of container carriers tends to cause warping distortion of hull structure under wave-induced excitation, eventually leading to the higher chance of resonance vibration between its torsional response and incoming waves. To handle this problem, a higher-order B-spline Rankine panel method and Vlasov-beam FE model was directly coupled in the time domain, and the coupled equation was solved by using an implicit iterative method. In order to capture the complicated behavior of thin-walled open section girder, a sophisticated beam-based finite element model was developed, which takes into account warping distortion and shear-on-wall effect. Then, the developed beam model was directly coupled with the time-domain Rankine panel method for hydrodynamic problem by using the fixed-point iteration method. The developed computational scheme was validated through the comparison with the frequency-domain solution on the container carrier model in linear springing regime.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.176-184
• /
• 2012

Installing floating structures in a coastal area requires careful observation of the finite-depth effect. In this paper, a Rankine panel method that includes the finite-depth effect is developed in the time domain. The bottom boundary condition is satisfied by directly distributing Rankine panels on the bottom surface. A stepwise analysis is performed for the radiation diffraction problems and consequently freely-floating motion responses over different water depths. The hydrodynamic properties of two test hulls, a Series 60 and a floating barge, are compared to the results from another computation program for validation purposes. The results for both hulls change remarkably as the water depth becomes shallower. The important features of the results are addressed and the effects of a finite depth are discussed.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.35-47
• /
• 1996

포텐셜을 기저로 하는 판요소법을 사용하여 자유 표면이 존재하는 유동장에서 일정 속도로 전진하는 3차원 물체의 형상을 설계하였다. 설계 방법으로는 원하는 압력 분포를 경계 조건으로 부여하고 이를 만족하는 물체 형상을 찾아내는 역해석법(inverse method)을 사용하였다. 즉, 주어진 압력으로부터 물체 표면에 분포된 법선 다이폴의 세기인 포텐셜 값을 결정하게 되며, 이는 물체 표면에 대한 Dirichlet형태의 경계 조건으로서 Green의 정리로부터 유도된 적분 방정식을 해석하게 된다. 전체 속도 포텐셜은 기본 유동인 선속에 대한 성분과 선제에 의하여 교란되는 성분으로 구성되어진다고 가정하였으며, 교란 포텐셜을 사용하여 선형화된 자유 표면 경계 조건을 적용하였다. 적분 방정식에 대한 수치 해석을 위해 물체 표면에 법선 다이폴과 Rankine 쏘오스를 분포하였으며, 자유 표면에는 Rankine 쏘오스를 분포하고 4점 유한 차분법을 사용하여 자유 표면 경계 조건이 만족되도록 하였다. 해로서 얻어지는 각 판요소에서의 Rankine 쏘오스의 세기는 가상의 유동 출입량으로서 형상 수정항으로 사용되었다. 몰수 회전 타원체의 형상 설계에 대하여 본 설계법을 적용한 결과 무한 수심에서나 조파 상태에서 $4{\sim}6$회의 반복 계산으로 충분히 수렴된 해를 얻을 수 있었다. 또한 자유 표면을 가르고 전진하는 Wigley 수학적 선형에 대한 형상 설계를 수행하여 만족스러운 결과를 얻어내었으며, 얻어진 수치해는 매우 안정적이고 빠른 수렴성을 보였다. 선형의 우열 비교를 통해 조파 저항을 감소시킬 수 있는 압력 분포의 형태를 파악하였으며, 이를 바탕으로 조파 저항의 관점에서의 5500TEU급 콘테이너 운반선의 설계를 수행하였다. 설계되어진 새로운 선형은 조파 저항의 관점에서 기존의 선형보다 계산과 실험에서 모두 우수하게 개량된 것으로 나타났다.