• Journal of Biosystems Engineering
• /
• v.23 no.2
• /
• pp.167-178
• /
• 1998

An Aero-NFT nutriculture system using microcomputer for cultivation of greenhouse melon was developed and the performance of the system was evaluated through experiments. The system could control temperature, EC and pH of the nutrient solution within the error ranges of $\pm$ 0.2$^{\circ}C$, $\pm$ 0.2 mS/cm, $\pm$ 0.1 pH, respectively. The results of cultivation experiment showed that temperature, EC and pH of the nutrient solution were generally controlled within the setting ranges during cultivation period. The growth results were good until pinching, but the fruit quality of melons was not high except sweetness and shape. To optimize performance of the system, more techlical information for nutriculture of greenhouse melon was needed.

• Journal of Environmental Impact Assessment
• /
• v.13 no.5
• /
• pp.243-250
• /
• 2004

Recently, concerns about health risks exposed to electromagnetic fields have been brought in the safety of electric power lines. A number of governmental and international organizations have advised to avoid the magnetic field exposure to the schools and residential areas. Some epidemiologic studies showed that electromagnetic fields should not exceed the exposure limits of 2-3mG to the people living near high-voltage transmission lines. In this study, the principles, ranges and survey methods of the assessment for powerfrequency electromagnetic fields were reviewed from the relevant research papers and documents. The ranges of electromagnetic fields were determined from 50m to 100m and have been defined according to the properties of each electric power lines and a new methodology was suggested in this study. It would be necessary to develop and improve specific assessment methods for various high-voltage transmission lines projects.

• Journal of the Korean Statistical Society
• /
• v.30 no.4
• /
• pp.667-678
• /
• 2001

The asymptotic behavior and distribution for quantiles estimators using ranked samples are introduced. Applications of quantiles estimation on finding the normal ranges (2.5% and 97.5% percentiles) and the median of some medical characteristics and on finding the Hodges-Lehmann estimate are discussed. The conclusion of this study is, whenever perfect ranking is possible, the relative efficiency of quantiles estimation using ranked samples relative to SRS is high. This may translates to large savings in cost and time. Also, this conclusion holds even if the ranking is not perfect. Computer simulation results are given and real data from lows 65+ study is used to illustrate the method.

• Journal of radiological science and technology
• /
• v.23 no.1
• /
• pp.97-101
• /
• 2000

In this study, the highly sensitive $CaSO_4:Tm$-PTFE TLDs has been fabricated for the purpose of measurement of high energy electron. $CaSO_4:Tm$ phosphor powder was mixed with polytetrafluoroethylene(PTFE) powder and moulded in a disk type(diameter 8.5 mm. thickness $90\;mg/cm^2$) by cold pressing. The absorbed dose distribution and ranges for high energy electron were measured by using the $CaSO_4:Tm$-PTFE TLDs. The ranges determined were $R_{100}=14.5mm$, $R_{50}=24.1mm$ and $R_P=31.8mm$, respectively and the beam flatness, the variation of relative dose in 80% of the field size, was 4.5%. The fabricated $CaSO_4:Tm$-PTFE TLDs nay be utilized in radiation dosimetry for personal, absorbed dose and environmental monitoring.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.576-582
• /
• 1999

The high temperature behavior of Al 6061 alloy was characterized by the hot torsion test in the temperature ranges of 400∼550℃ and the strain rate ranges of 0.05∼5/sec. To decide optimum deformation condition, three types of deformation maps were individually made from the critical strain (εc). deformation resistance(σp) and deformation efficiency (η). The critical strain(εc) for dynamic recrystallization (DRX) which was decided from the inflection point of strain hardening rate(θ) - effective stress (σ) curve was about 0.65 times of peak strain (εp). The relationship among deformation resistance (peak stress, σp), strain rate (ε), and temperature (T) could be expressed by ε=2.9×1013[sinh(0.0256σp]7.3exp (-216,000/RT). The deformation efficiency (η)which was calculated on the basis of the dynamic materials model (DMM) showed high values at the condition of 500∼550℃, 5/sec for 100% strain. The results from three deformation maps were compared with microstructures. The best condition of plastic deformation could be determined as 500℃ and 5/sec.

• Economic and Environmental Geology
• /
• v.17 no.3
• /
• pp.171-177
• /
• 1984

Representative sulphide samples from the Sangdong skarn orebody and quartz veins show relatively narrow ranges of sulphur isotope values ranging from $^+5.5$ to $^+6.9$ permil and average $^+5.0$ permil with a standard deviation of 0.77 permil. Much higher temperature isotopic temperatures than homogenization temperatures may indicate even minerals in contact did not form together in isotopic equilibrium. Under conditions of formation of the skarn and quartz veins, ${\delta}^{34}\;H_2S$ ranges from $^+4.5$ to $^+5.3$ permil, suggesting a magmatic origin for the sulphur. Carbon and oxygen isotope values seem to show some of the spread of increasing ${\delta}^{13}C$ values of the interbedded limestone with distance from the central zone of the Sangdong mineralization. Negative values of ${\delta}^{13}C$ fluids appear to be typical of many ore deposits including those of magmatic origin. Calculated ${\delta}^{18}C$ values of the fluids are typical of those derived from magmatic sources.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.4
• /
• pp.258-267
• /
• 1998

For the purpose of investigating the growth characteristics and composition of nitrides, gas nitridings of the austenitic stainless steel, STR 36 heat resisting steel and martensitic stainless steel are investigated at the temperature ranges between $500^{\circ}C$ and $675^{\circ}C$ for 5hours under the $75%NH_3+5%CO_2+20%$Air gas atmosphere. When gas nitriding the austentic stainless steel and STR 36 heat resisting alloy, the abnormal growth behavior of compound layer deviating from the conventional diffusion law with increasing temperature appears, while the compound layer of martensitic stainless steel shows the normal diffusional growth behavior. From the examination of microstructure, X-ray diffraction and hardness test, it is concluded that the abnormal growth behavior of compound layer with increasing temperature induces from the formation and dissolution of CrN and ${\gamma}^{\prime}-Fe_4N$ at the nitriding temperature ranges of $600{\sim}650^{\circ}C$.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.108.1-108.1
• /
• 2011

Turbulence is ubiquitous in astrophysical fluids such as the interstellar medium(ISM) and the intracluster medium(ICM). There are many driving mechanisms which can inject energy into the fluid in variety driving scales, But the plausible driving scale of ISM/ICM turbulence are yet unknown. Therefore, understanding different statistical properties between turbulence with single driving scale and turbulence with double driving scale is required. In this work, we performed 3-dimensional isothermal compressible, magnetohydrodynamic(MHD) turbulence simulations. We drive turbulence in the Fourier space in two ranges, 2

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.556-560
• /
• 2004

In this paper, thermal and structural properties of epoxy/elastomer blend were measured by DSC, TGA and FESEM. Specimens were made of dumbbell forms by the ratio of 5, 10, 15, and 20[phr] by changing elastomer content. The measuring temperature ranges of DSC were from -20[℃] to 150[℃] and heating rate was 4[℃/min]. And the measuring temperature ranges of TGA were from 0[℃] to 800[℃], and heating rate was 5[℃/min]. Also we observed structure of specimens through FESEM with magnification of 1000 times and voltage of 15[kV] by breaking quenched specimens. As experimental results, we could know that thermal and structural properties were improved according to decrease of elastomer content. Because it increased glass transition temperature, high temperature and structure of elastic epoxy.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.117-122
• /
• 1987

Glass forming ranges in the AlF3-(Mg＋Sr＋Ba)F2-P2O5 system are studied and ultraviolet transmission, infrared transmission, coefficient of refractive index, thermal expansion coefficient, density and chemical durability of the glasses are determined. Glass forming range is restricted MgF2 0-10wt%, SrF2 10-50wt%, BaF2 10-40wt% in this system. While BaF2 is substituted by SrF2, density and refractive index are decreased, micro hardness and thermal expansion coefficient are increased according to the increasing of SrF2 at fixed MgF2 contents. These samples represent high transmittance(93%) from 400nm to 3800nm and chemical durability of these samples show less than 0.3mg/$\textrm{cm}^2$$.$hy by weightloss.