• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.143-148
• /
• 2005

The microstructure, electrical properties, and clamping voltage characteristics of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Y_2O_3(ZPCCY)-based$ varistor ceramics sintered at $1350^{\circ}C$ were investigated as a function of sintering time from 1 to 3 h. With increasing sintering time, the average grain size and density increased in the range of $11.4\~16.0\;{\mu}m$ and $5.34\~5.54g/cm^3$, respectively, in accordance of increasing sintering time. The nonlinear exponent decreased in the range of $60\~26$ and the leakage current increased in the range of $1.3\~10.7\;{\mu}A$ with increasing sintering time. The clamping voltage ratio increased in the range $1.58\~1.65$ for ratio surge current of 10 A as the sintering time increased.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.658-663
• /
• 1999

2D sliced CT images hardly express the human disease in a space. This space expression can be reconstructed into 3D image by piling up the CT sliced image in succession. In medical image, in order to get the reconstructed 3D images, expensive system or much calculation time is needed. But by changing the method of reconstruction procedure and limit the range, the reconstruction time could be reduced. In this study, to reduce the processing time and memory, we suggested a method of interpolation and ray casting processing at the same time in a limited range. Such a limited range processing have advantages that we could reduce the unnecessary interpolation and ray casting. Through a experiment, it is founded that the reconstruction time and the memory was much reduced.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.145-151
• /
• 2004

We present an efficient data structure to obtain the range minima in an away in constant time. Recently, suffix ways are extensively used to search DNA sequences fast in bioinformatics. In constructing suffix arrays, solving the range minima problem is necessary When we construct suffix arrays, we should solve the range minima problem not only in a time-efficient way but also in a space-efficient way. The reason is that DNA sequences consist of millions or billions of bases. Until now, the most efficient data structure to find the range minima in an way in constant time is based on the method that converts the range minima problem in an array into the LCA (Lowest Common Ancestor) problem in a Cartesian tree and then converts the LCA problem into the range minima problem in a specific array. This data structure occupies O( n) space and is constructed in O(n) time. However since this data structure includes intermediate data structures required to convert the range minima problem in an array into other problems, it requires large space (=13n) and much time. Our data structure is based on the method that directly solves the range minima problem. Thus, our data structure requires small space (=5n) and less time in practice. As a matter of course, our data structure requires O(n) time and space theoretically.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.29-38
• /
• 2018

This research is to analyze the change of pupil size in gender through the eye-tracking experiment in large complex cultural space. It is meaningful that figured out the common characteristics and differences from gender observation characteristics. Through this research, the analyzed results of the observation time measurement that appeared from the fixation and saccades pupil indicator able to define as follows. Firstly, it was suggested that there were differences between each gender and participants through extract pupil size that can be the standard examples for the case from male and female and the process of extracting the relative pupil size change on the hourly range. From the specific time range, it was possible to indicate bending characteristics and reversal phenomena of Fixation and Saccades. Second, the result was found equally from both male and female group that the rapid increment of pupil size at initial time range immediately after the eye-tracking experiment has been initiated. This can be considered to actively accepting the stress given by the subject through the extended pupil after 10 seconds that compare to indicated very low pupil size between 0 to 10 seconds after starting the experiment. Third, meanwhile 0 to 10 seconds after initial observation are the time of sudden change in the pupil size, therefore these time range data cannot be regarded as observed in the appropriate condition. Thus, it able to define the highest times of emotional processing for male as 10 to 80 seconds, and for female as 10 to 70 seconds. There was no definition of the time range data for observation experiment from previous research, this data can be considered to stable time to observation through the pupil extension. Therefore, it is possible to set suitable time of observation experiment to be around 70 to 80 seconds exclude initial experiment time.

• Journal of the Korean housing association
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2006

Building would be deteriorated with time elapse, influenced by its geographic situation, climate and other environmental conditions. In addition, the systematic maintenance could be provided to keep the resident a recent living condition. The existing breakdown maintenance will be changed into the preventive maintenance. The preventive maintenance is required to get the repair time, the repair scope and frequency. In this paper, it aimed at providing the repair time range over the building components, utilizing the relation between the determination curve and the performance recovery through repair. Results of this study are as follows : First, the forecast of the repair time over the building components could be calculated and equalized with the deterioration and performance degree. Second, the repair time range of building components would be provided into five categories and 3rd repair time. Results of this study will set up the long-term repair plan of building, and finally keep an housing condition comfortable.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.534-543
• /
• 2015

This paper introduces the time-misalignment error between multiple range measurements acquired by an onboard distance measuring equipment (DME) interrogator and proposes an efficient position determination method that can mitigate the negative effects of the time-misalignment error. The introduced time-misalignment error does not occur in conventional utilization of DME combined with VHF omnidirectional range (VOR). The proposed position determination method projects all the DME range measurements acquired irregularly during an interval to the same time instance where the aircraft position is determined. By the simulation utilizing a representative aircraft trajectory, it is shown that it is possible to estimate the horizontal position accurately without any changes of ground DME facilities.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.30-35
• /
• 1995

In this research effect of physicochemical parameter on flocculation using PASS-100 were evaluated. pEt flocculant dosage, mixing intensity and detention time were adopted as experimental variables. The physicochemical parameter( p% mixing intensity and mixing time ) were important Parameter on flocculation performance. Effluent pH range for effective flocculation was 4.5-7. Optimum Gt$_{d}$ range was 20,000-30,000 and its range similar to alum flucculation. Rapid mixing was very important parameter to floe formation in PASS- 100 flocculation. Whereas, slow mixing did not affect to the removal efficiency at settling time for 30minute or more.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.269-276
• /
• 2011

This paper considers the rail crane scheduling problem with minimizing the sum of the range of order completion time and make-span of rail crane simultaneously. The range of order completion time implies the difference between the maximum of completion time and minimum of start time. Make-span refers to the time when all the tasks are completed. At a rail terminal, logistics companies wish to concentrate on their task of loading and unloading container on/from rail freight train at a time in order to increase the efficiency of their equipment such as reach stacker. In other words, they want to reduce the range of their order completion time. As a part of efforts to meet the needs, the crane schedule is rearranged based on worker's experience. We formulate the problem as a mixed integer program. To validate the effectiveness of the model, computational experiments were conducted using a set of data randomly generated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.195-201
• /
• 2013

In this paper, we present optimization technique for the response time of DVR (Dynamic Voltage Restorer) and the possible compensation range of voltage dip by the DVR system. To protect 3-phase phase-controlled rectifier from voltage dip, DVR system needs to have optimum response time as an important design factor. Although the fast response time of DVR ensures wider range of voltage dip, DVR controller has so high cost and poor stability. This paper proposes DVR system with optimum response time required for certain intensity of voltage dips and good stability to support possible compensation range of voltage dip. Proposed technique showed optimum response time and good stability for overall system. We believe that proposed technique is reliable and useful in DVR design.