• 제목/요약/키워드: Range of period

검색결과 3,867건 처리시간 0.043초

A High Efficiency Power Conversion Circuit with Wide ZVS Range for Large Screen PDP Sustaining Power Module (넓은 영전압 스위칭 범위를 갖는 대화면 PDP용 유지전원단을 위한 고효율 전력 변환회로)

  • Park Kyung-Hwa;Moon Gun-Woo
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • 제10권6호
    • /
    • pp.578-586
    • /
    • 2005
  • Recently, due to the launch of digital broadcasting service, the demand of Flat Panel Display (FPD) is sharply rising. Among them, the PDP is expected to be one of the most promising digital displays of next generation because of its large screen size, high resolution, thinness and board field of view. Meanwhile, the PDP uses ADS (Address Display-period Separation) scheme which divide one subfield into address and sustaining period to express the grey scale of images. Since the output of sustaining power module Is mostly used for sustaining period, the load of the sustaining power module can be considered as a pulsating load. Due to this particular load condition, if the wide ZVS range of the power switches is not guaranteed, the hard switching causes large amount of switching loss and serious thermal problem in power module. In this paper, a high efficiency power conversion circuit for 60' PDP sustaining power module which achieves wide ZVS range with the help of additional ZVS tank is proposed. According to the various gating methods, the different operations of the proposed converter are presented. And, to confirm the properties of the proposed converter, an experimental prototype of 900W power converter is constructed md tested. As a result, more than $92\%$ of high efficiency is obtained at $10\%$ load condition, and the ZVS operation is achieved from full load to $10\%$ load condition.

Investigation on Effective Peak Ground Accelerations Based on the Gyeongju Earthquake Records (경주지진 관측자료에 기반한 유효최대지반가속도 분석)

  • Shin, Dong Hyeon;Hong, Suk-Jae;Kim, Hyung-Joon
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • 제20권7_spc호
    • /
    • pp.425-434
    • /
    • 2016
  • This study investigates important parameters used to determine an effective peak ground acceleration (EPGA) based on the characteristics of response spectra of historical earthquakes occurred at Korean peninsula. EPGAs are very important since they are implemented in the Korean Building Code for the seismic design of new structures. Recently, the Gyeongju earthquakes with the largest magnitude in earthquakes measured at Korea took place and resulted in non-structural and structural damage, which their EPGAs should need to be evaluated. This paper first describes the basic concepts on EPGAs and the EPGAs of the Gyeongju earthquakes are then evaluated and compared according to epicentral distances, site classes and directions of seismic waves. The EPGAs are dependant on normalizing factors and ranges of period on response spectrum constructed with the Gyeongju earthquake records. Using the normalizing factors and the ranges of period determined based on the characteristics of domestic response spectra, this paper draw a conclusion that the EPGAs are estimated to be about 30 % of the measured peak ground accelerations (PGA).

Phosphorus Cycle in Three Herb Plant Populations in the Basin of Mt. Geumoh (금오산 분지의 삼종 초본식물개체군의 인의 순경)

  • 류승원
    • Journal of Plant Biology
    • /
    • 제30권4호
    • /
    • pp.299-309
    • /
    • 1987
  • The seasonal pattern and the annual magnitude of the internal (or biochemical) and plant-soil cycles of phophorus in adjacent three different herb plant populations-Helianthus tuberosus L., Artemisia princeps Pampan and Phalaris anundinacea L.-in an old field of the basin in the Mt. Geumoh were investigated. A lot of the phosphorus demand for the three populations was supplied by the withdrawal from below-ground organ in early growing period, by the absorption from soil in mid-growing period and by the withdrawal from stem in later growing period. But in the A. princeps and P. arundianacea populations, a great deal of phosphorus seemed to be absorbed prior to the first withdrawal. The annual amount of the phosphorus flowing throughthe internal cycle was about 59% of the total hosphorus flow on theorgan level in the H. tuberosus population, 41% in the A. princeps population and 32% in the P. arundinacea population, indicating that the tuber plant had the most developed internal cycle system. The annual amount of phosphorus which took part in the plant-soil cycle in the stand of the three populations was in the range of 4.49-5.65 gPm-2, corresponding to only 3-8% of the extractable phosphorus contained in the soil of 0-20 cm depth. The fact that the H. tuberosus population is higher in the extent fo internal cycle but smaller in the magnitude of plant-soil cycle and lower in the turnover rate of phsophorus than the other two populations suggests that the growth of H. tuberosus population may be less dependent on soil phosphorus availability than those of the other two populations.

  • PDF

USAT(Ultrasonic Satellite System) for the Autonomous Mobile Robots Localization (무인 이동 로봇 위치추정을 위한 초음파 위성 시스템)

  • Lee, Dong-Hwal;Kim, Su-Yong;Yoon, Kang-Sup;Lee, Man-Hyung
    • Journal of Institute of Control, Robotics and Systems
    • /
    • 제13권10호
    • /
    • pp.956-961
    • /
    • 2007
  • We propose a new distance measurement method and local positioning system for the autonomous mobile robots localization. The distance measurement method is able to measure long-range distances with a high accuracy by using ultrasonic sensors. The time of flight of the ultrasonic waves include various noises is calculated accurately by the proposed period detecting method. The proposed local positioning system is composed of four ultrasonic transmitters and one ultrasonic receiver. The ultrasonic transmitter and receiver are separated but they are synchronized by RF (Radio frequency) signal. The proposed system using ultrasonic waves is represented as USAT(Ultrasonic Satellite System). USAT is able to estimate the position using the least square estimation. The experimental results show that the proposed local positioning system enables to estimate the absolute position precisely.

COVID-19 Pandemic and the Reaction of Asian Stock Markets: Empirical Evidence from Saudi Arabia

  • SHAIK, Abdul Rahman
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권12호
    • /
    • pp.1-7
    • /
    • 2021
  • The study examines the influence of COVID-19 on the stock market returns of Saudi Arabia. The data was analyzed through event study methodology using daily price data of Tadawul All Share Index (TASI). The study examines the behavior pattern of the Saudi Arabian stock market in different phases during the event period by selecting six-event windows with a range of 10 days. The results report a negative Abnormal Return (AR) of -0.003 on the event date, while the abnormal returns reversed the next day to 0.005 positively. The result of Cumulative Abnormal Return (CAR) is negative and significant at the 1 percent level in all the six-event windows starting from the event date to day 59 after the event for the TASI index. Even though the influence of the COVID-19 pandemic decreased after 30 days of the event date, it increased during the last ten days of the event window. The stock market volatility of Saudi Arabia increased during the post-event period compared to the pre-event period with a negative mean return of -0.326 and a greater standard deviation. In a conclusion, the study found a significant influence of the COVID-19 pandemic on the stock market returns of TASI.

Design of sinusoidal shape channel PCHEs for supercritical LNG based on CFD simulation (CFD 시뮬레이션 기반 초임계 LNG용 사인함수 PCHE 설계)

  • Fan, Jinxing;Yeom, Eunseop
    • Journal of the Korean Society of Visualization
    • /
    • 제19권3호
    • /
    • pp.69-76
    • /
    • 2021
  • Printed circuit heat exchanger (PCHE) is a compact heat exchanger with good heat transfer performance, high structure integrity, and reliability over a wide range of temperatures and pressures. Instead of the traditional zigzag and straight shape channel, the sinusoidal shape channel was adopted in this study to investigate the relation of thermal-hydraulic performance and waviness factors (period and amplitude). The local flow characteristics and the heat flux distribution were compared to verify the effects of period and amplitude on heat transfer performance. As the period of channel becomes shorter, the rapid change of the flow direction can produce high flow separation around the corner leading to the disturbance of the boundary layer opposite wall. The nonuniform distribution of flow velocity appeared around the corner positions can promote fluid mixing and lead to higher thermal performance. An evaluation index was used to compare the comprehensive performance of PCHE considering the Nusselt number and Fanning factor. Based on the simulation results, the optimal design parameters of PCHE channel shape were found that the channel with an equivalent bending angle of 15° offers the highest heat flux capacity.

A study on the stability of a crab trap fishing boat with water tank experiment (수조 실험에 의한 게 통발 어선의 복원성에 관한 연구)

  • Lee, A-Reum;Kang, Il-Kwon;Jo, Hyo-Jae
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • 제45권4호
    • /
    • pp.267-275
    • /
    • 2009
  • According to the recent statistics of marine casualties in Korea, fishing boats are more likely to be ended in the casualties, and small fishing boats especially cause much more accidents in sinking and capsizing than any other big vessels. These casualties were mainly produced from the ignorance on the lack of own ship stability. From this view, this study aims to analyze the characteristics of stability on the crab trap fishing boat receiving transverse wave by means of carrying out the water tank test. The rolling angle of the model ship was affected largely with the displacement and the wave period of it, and the trends were shown that the magnitude of the angle was proportional to the displacement, but inversely to the wave period. And the wave height had effect on the rolling angle just in the specific range of the wave period. The force of steady wind didn't have influence on the rolling variation significantly.

Interpretation on Making Techniques of Some Ancient Ceramic Artifacts from Midwestern Korean Peninsula: Preliminary Study (한반도 중서부 출토 일부 고대 세라믹 유물의 제작기술 해석: 예비 연구)

  • Lee, Chan Hee;Jin, Hong Ju;Choi, Ji Soo;Na, Geon Ju
    • Journal of Conservation Science
    • /
    • 제32권2호
    • /
    • pp.273-291
    • /
    • 2016
  • Some ceramic artifacts representing time-wise from comb pattern pottery in the Neolithic Age to white porcelain in Joseon Dynasty were selected from 7 sites in the north and south area of Charyeong Mountain Range in order to making techniques interpretation and development process of ancient ceramics through physicochemical and mineralogical quantitative analysis. Studied pottery samples in the Prehistoric times showed trace of ring piling in soft-type, and pottery in the Three Kingdoms Period had both soft and hard-type but kettle-ware and storage-ware were made with ring piling, but table-ware was made by wheel spinning. Different from pottery after the Three Kingdom Period when refinement of source clay was high, pottery in the Neolithic Age and in the Bronze Age exhibited highly mineral content in sandy source clay, which showed a lot of larger temper than source clay. Groundmass of celadon and white porcelain almost did not reveal primary minerals but had high content of minerals by high temperature firing. Ceramic samples showed some different in major and minor elements according to sites irrespective of times. Geochemical behaviors are very similar indicating similar basic characteristics of source clay. However, loss-on-ignition showed 0.01 to 12.59wt.% range with a large deviation but it rapidly decreased moving from the Prehistoric times to the Three Kingdom Period. They have correlation with the weight loss due to firings, according to burning degree of source clay and detection of high temperature minerals, estimated firing temperatures are classified into 5 groups. Pottery in the Neolithic Age and in the Bronze Age belongs from 750 to $850^{\circ}C$ group; pottery in the Three Kingdom Period are variously found in 750 to $1,100^{\circ}C$ range of firing temperature; and it is believed celadon and white porcelain were baked in high temperature of 1,150 to $1,250^{\circ}C$. It seems difference between refinement of source clay and firing temperature based on production times resulted from change in raw material supply and firing method pursuant to development of production skill. However, there was difference in production methods even at the same period and it is thought that they were utilized according to use purpose and needs instead of evolved development simply to one direction.

Efficacy of Auxiliary Traits in Estimation of Breeding Value of Sires for Milk Production

  • Sahana, G.;Gurnani, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권4호
    • /
    • pp.511-514
    • /
    • 1999
  • Data pertaining to 1111 first lactation performance record of Karan Fries (Holstein-Friesian $\times$ Zebu) cows spread over a period of 21 years and sired by 72 bulls were used to examine the efficiency of sire indices for lactation milk production using auxiliary traits. First lactation length, first service period, first calving interval, first dry period and age at first calving were considered as auxiliary traits. The efficiency of this method was compared with simple daughter average index (D), contemporary comparison method (CC), least-square method (LSQ), simplified regressed least-squares method (SRLS) and best linear unbiased prediction (BLUP) for lactation milk production. The relative efficiency of sire evaluation methods using one auxiliary trait was lower (24.2-32.8%) in comparison to CC method, the most efficient method observed in this study. Use of two auxiliary traits at a time did not further improve the efficiency. The auxiliary sire indices discriminate better among bulls as the range of breeding values were higher in these methods in comparison to conventional sire evaluation methods. The rank correlation between breeding values estimated using auxiliary traits were high (0.77-0.78) with CC method. The rank correlation among auxiliary sire indices ranged from 0.98 to 0.99, indicating similar ranking of sire for breeding values of milk production in all the auxiliary sire indices.

Productivity Growth of Vietnamese Commercial Banks: An Application of Non-Parametric Analysis

  • NGUYEN, Manh Hung
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권9호
    • /
    • pp.177-187
    • /
    • 2021
  • The purpose of the research to evaluate the efficiency and productivity growth rate of some Vietnamese commercial banks in the period 2008-2020. Using input and output selection theory, the author selected 2 models, estimating the efficiency for model 1 and estimating the yield change for both the models. We have built a model to estimate the efficiency and calculate as well as decompose the productivity growth of Vietnamese commercial banks during the period of active mergers and acquisitions activities in the banking system. Based on the results of the efficiency estimation, TFP shows during mergers and acquisitions, efficiency fluctuates but in an inverted U-shape (increasing from 2008-2011 but decreasing from 2013 to 2020). The estimated results of the impact assessment model show that FDI reduces the efficiency of banks. Productivity analysis shows that 6 out of 23 banks in the study period had positive TFP growth (tfpch > 1) due to technical progress and management efficiency. The findings of this study suggest that Vietnam's commercial banking system has many opportunities to improve operational efficiency in many aspects. In which, there are opportunities to increase credit, improve governance as well as improve the technology level of each bank. In addition, along with traditional products such as deposits and loans, diversification with a wide range of products and services is an important factor to enhance customer experience and demand in commercial banks.