• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.436-441
• /
• 2015

The chemical properties of paddy fields in Gyeonggi province were monitored every 4 years from 1999 to 2015 in order to provide basic information for soil fertility management of paddy fields. In 2015, the soil chemical properties of paddy fields were 5.9 in pH, $23g\;kg^{-1}$ in organic matter (OM), and $84mg\;kg^{-1}$ in available phosphate (Avail. $P_2O_5$). Exchangeable (Exch.) potassium (K), calcium (Ca) and magnesium (Mg) were 0.30, 5.1 and $1.3cmol_ckg^{-1}$, respectively, and available silicate (Avail. $SiO_2$) was $129mg\;kg^{-1}$. In the long-term analysis, the contents of Avail. $SiO_2$, Exch. Ca and pH of paddy soils showed increasing tendency. However, Avail. $P_2O_5$ and Exch. K tended to decrease, and there were no significant changes in the contents of OM and Exch. Mg. Paddy soil within appropriate pH range increased from 44% in 1999 to 76% in 2003, 84% in 2007, 63% in 2011, and 80% in 2015. But soil within appropriate range of Exch. Ca tended to decrease, showing 36% in 1999, 42% in 2003, 38% in 2007, 37% in 2011 and 32% in 2015. In case of Avail. $SiO_2$, soil within appropriate range increased from 14% in 1999 to 17% in 2003, 18% in 2007, 16% in 2011, and 31% in 2015. As a result, paddy fields with less in nutrient level need to be more fertilized based on soil analysis. And the application of silicate fertilizer is strongly recommended to those of paddy fields in need. Also soil management such as the cultivation of green manure crop or application of rice straw will be necessary to increase the organic matter content of paddy soil.

• PNF and Movement
• /
• v.16 no.1
• /
• pp.133-141
• /
• 2018

Purpose: This study examined the effect of proprioceptive neuromuscular facilitation (PNF) rehabilitation exercise on postoperative range of motion (ROM), pain, and function of breast cancer patients. The purpose of this study was to provide fundamental data regarding the use of PNF rehabilitation exercise for patients with breast cancer. Methods: Fourteen patients who underwent surgery due to breast cancer were randomly divided into an experimental group (n=7) that performed PNF rehabilitation exercise and a control group (n=7) that performed general rehabilitation exercise. Both groups performed the respective exercises for 30 minutes, five times a week for 4 weeks. For the measurement of ROM, the range of shoulder abduction was measured using a clinometer smartphone application. The shoulder pain and disability index (SPADI) was used to measure the level of pain and functional activity. A paired t-test was conducted to compare within-group changes before and after the PNF rehabilitation exercise. Differences between the experimental group and control group were analyzed by an independent t-test. For all tests, the level of statistical significance was set at ${\alpha}=0.05$. Results: After the exercise, there was a significant within-group change in the ROM and SPADI in both the experimental group and control group (p<0.01). There was also a significant between-group difference in the ROM and SPADI after the intervention (p<0.05). Conclusion: Rehabilitation exercise is generally applied as a treatment for patients with breast cancer after surgery and is relatively effective. The application of PNF rehabilitation exercise may be useful in such patients, considering its effects on ROM improvement, pain reduction, and functional enhancement.

• Acute and Critical Care
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2018

Background: The purpose of this study was to evaluate the clinical application of modified Burns Wean Assessment Program (m-BWAP) scoring at first spontaneous breathing trial (SBT) as a predictor of successful liberation from mechanical ventilation (MV) in patients with endotracheal intubation. Methods: Patients requiring MV for more than 72 hours and undergoing more than one SBT in a medical intensive care unit (ICU) were prospectively enrolled over a 3-year period. The m-BWAP score at first SBT was obtained by a critical care nursing practitioner. Results: A total of 103 subjects were included in this study. Their median age was 69 years (range, 22 to 87 years) and 72 subjects (69.9%) were male. The median duration from admission to first SBT was 5 days (range, 3 to 26 days), and the rate of final successful liberation from MV was 84.5% (n=87). In the total group of patients, the successful liberation from MV group at first SBT (n=65) had significantly higher m-BWAP scores than did the unsuccessful group (median, 60; range, 43 to 80 vs. median, 53; range, 33 to 70; P<0.001). Also, the area under the m-BWAP curve for predicting successful liberation of MV was 0.748 (95% confidence interval, 0.650 to 0.847), while the cutoff value based on Youden's index was 53 (sensitivity, 76%; specificity, 64%). Conclusions: The present data show that the m-BWAP score represents a good predictor of weaning success in patients with an endotracheal tube in place at first SBT.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3379-3389
• /
• 1999

Important network application services have been rapidly increased along with the growth of the Internet. So, it is desirable for such applications to serve transparently, continuously and safely even if the network is temporally disconnected or certain hosts running those services are crashed down. To satisfy such requirementes, many group communication systems have been developed; but, those systems restrict its range within a single LAN or directly interconnected LAN environments since the communication through the Internet is too slow and too unreliable to support group communication. As of now, it is expected the Internet is going to e sufficiently fast and reliable in the near communication system, named FACE(Java Advanced Communication Environment), supporting Extended Virtual which is a basic communication layer, RPGS(Reliable Process Group Service) which manages application process groups, and JACE API for developing Java application services and clients programs. In addition, an experimental replicated object space is developed as an application of the JACE system.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2613-2615
• /
• 2001

청각시스템의 저전력 및 가격의 저렴화를 위해 달팽이관의 BM(Basilar Membrain)모델을 아날로그 VLSI 마이크로 파워 공정으로 구현하고 있다. 본 논문에서는 소리의 주파수 정보 추출기능을 하는 직렬 연결된 트리구조(TSBF : Tree-structured Cascaded Bandpass Filter)의 16채널의 아날로그 중간대역통과 필터회로를 CMOS VLSI 공정을 이용하여 설계하였다. 특히 큰 입력 신호에 대해서도 파형왜곡 없이 선형적인 특성을 가지는 트랜스 컨턱터를 이용하여 필터를 구현하였다. 필터는 저대역통과필터와 출력이득의 감쇄를 줄이기 위해서 중간대역통과필터를 이용하여 전체 시스템을 설계했다. 본 논문에서 기존의 150mVp-p 입력신호 범위의 트랜스 컨턱터를 Substrate 입력을 가지는 트랜스 컨턱터를 이용하여 입력신호 범위를 1Vp-p 까지 늘였다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.127-135
• /
• 2004

The calibration of lens to be used and the planning of photographing planning layout is very important to achieve the requested accuracy in the precision measurement by close-range photogrammetry. Establishment of absolute coordinate system is regarded as another important factor for the purpose of measuring absolute deformation of photogrammetric object. In this study, the following tasks were performed : (1) calibration of super-wide-angle lens or focal length 21mm fer close-range photographing used by 35mm metric camera, (2) development of the measuring system for monitoring of absolute deformation through periodic observation of small area, and, (3) application of this system to monitor the absolute deformation of surface of underwater structure in fixed cycle and to present the efficiency of the system.

• Journal of Biomedical Engineering Research
• /
• v.36 no.3
• /
• pp.69-78
• /
• 2015

Ultrasonic physiotherapy systems should comply with IEC 60601-2-5(particular requirements for safety of ultrasonic physiotherapy equipment) standard for safety of patients and clinical performances. One of the most important parameters in the standard is the effective radiating area ($A_{ER}$). It has to be measured in accordance with IEC 61689 (field specifications and methods of measurement in the frequency range 0.5MHz to 5MHz). Typical ultrasonic physiotherapy system works in the frequency range 1MHz ~ 3MHz to comply with the IEC 61689. However, ultrasonic physiotherapy system using frequencies over 5MHz is out of the IEC 61689's scope. That is, even if such ultrasonic physiotherapy systems are developed by demands of the market, there is no standard to apply. It is the motivation for this study. Whereas there are other parameters to be considered, this study focuses on the effective radiating area and shows effectiveness of applying IEC 61689 in measuring effective radiating area of ultrasonic physiotherapy systems using frequency range over 5MHz by comparing the results of computer simulation and experiment. Results of this study shows that applying the IEC 61689 standard to ultrasonic physiotherapy system using frequency range over 5MHz is possible.

• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.101-108
• /
• 2010

The local structural states of amorphous alloys have been depicted previously via short-range orders (SROs). However, the concept of SROs alone is inadequate and sometimes insufficient to explain the structure-property relation of the amorphous alloys. In this study, we propose new types of medium-range building structures that affect the mechanical properties, plasticity in particular. Using a combination of molecular dynamics simulations and the Voronoi tessellation method, we demonstrate a three-dimensional configuration of icosahedral medium-range orders (I-MROs) and elucidate how these icosahedral orders evolve by the application of shear deformation. It was observed that the structural stability of the icosahedral orders relies largely on how they are linked via percolation and this linking is explained in detail.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.341-350
• /
• 2014

The torque ripple of switched reluctance motors (SRMs) is the main disadvantage that limits the industrial application of these motors. Although several methods for smooth-toque operation (STO) have been proposed, STO works well only within a certain torque and speed range because of the constraints of the supply voltage and peak current. Based on previous work that sought to expand the STO range, a scheme is developed in this study to determine the maximum smooth torque range at each speed. The relationship between the maximum smooth torque and speed is defined as the smooth torque speed characteristics (STSC), a concept similar to torque speed characteristics (TSC). STSC can be utilized to evaluate torque utilization by comparing it with TSC. Thus, the concept benefits the special design of SRMs, especially for the generation of smooth torque. Furthermore, the torque sharing function (TSF) derived from the proposed method can be applied to STO, which produces a higher smooth torque over a wider speed range in contrast to four typical TSFs. TSimulation and experimental results verify the proposed method.