• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.89-92
• /
• 2009

Pure Ti as well as Ti-6Al-4V alloy exhibit excellent properties for dental implant applications. However, for a better biocompatibility it seems important to avoid in the composition the presence of V due to the toxic effects of V ion release. Thus Al and V free and composed of non-toxic element such as Nb, Zr alloys as biomaterials have been developed. Especially, Zr contains to same family in periodic table as Ti. The addition of Zr to Ti alloy has an excellent mechanical properties, good corrosion resistance, and biocompatibility. In this study, the electrochemical characteristics of Ti-Zr alloys for biomaterials have been investigated using by electrochemical methods. Methods: Ti-Zr(10, 20, 30 and 40 wt%) alloys were prepared by arc melting and homogenized for 24 hr at $1000^{\circ}C$ in argon atmosphere. Phase constitutions and microstructure of the specimens were characterized by XRD, OM and SEM. The corrosion properties of the specimens were examined through potentiodynamic test (potential range of -1500 ~ 2000 mV), potentiostatic test (const. potential of 300 mV) in artificial saliva solution by potentiostat (EG&G Co, PARSTAT 2273. USA).

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.89-94
• /
• 2005

In this paper, we propose a fuzzy PID controller of new method. There are two problems in absolute digital PID controller. First, much calculation time need for obtain the sum of data at each period. Second, this is problem need much memory because to storage every data at the before period. We use the speed type PID digital controller to improvement such problems. In the propose controller doesn't use without adjustment the crisp output error and we doesn't use nile tables in the fuzzy inference process at the forward stage fuzzifier. We inference output member ship function by using the relation and range of two variable of PID gain parameters. We can obtained desired results through the simulation and a experiment of the hydraulic servo motor control system.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.355-359
• /
• 2001

This paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with DTC. The control system consists of stator flux observer, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control that inputs are current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated by observed stator flux-linkage space vector. The estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operating area. It does not require the knowledge of any motor parameters, nor particular care for motor starting, In order to prove the suggested control algorithm, we have a simulation and testing at actual experimental system. The developed sensorless control system is shown a good speed control response characteristic results and high performance features in 50/1000 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• Journal of the Korean Home Economics Association
• /
• v.33 no.6
• /
• pp.199-211
• /
• 1995

The purpose of this study was to provide a brassiere size chart for making the well-fitted brassiere. The subjects are 2811 women whose range of age is 12 to 59. These woman were classified into 5 age groups by seniority ; age group 1(12~19), age group 2(20~29), age group 3(30~39), age group 4(40~49), age group 5(50~59). statistical differences of measurements were analyzed among 5 age groups through ANOVA. Correlation between measurements were analyzed by correlation analysis. In addition, new brassiere size chart and production rate tables were proposed in this study. The results of the study were as follows. 1) Most of the body measurements were significantly different among 5 age groups. The height was decreasing by getting older while weight was increasing significantly. The 3 girth measurements(top bust, bust, under bust girth) in breast, bust width, bust depth were apt to increase definitely. The 3 girth measurements had high Correlation coefficients among 3 girth mesurements. Therefore, it is valid to pick out cup size and under bust girth for representative items of size chart. 2) Under bust girth and cup size were chosen as 2 axes of brassiere size chart. From the dual distribution table whose intervals had been determined by KS size chart, 17 sizes, which had more than 2% of appearance, were suggested for brassiere size chart. Through these new size charts, the suggested brassiere sizes covered 82.5% of all subjects. The suggested brassiere size chart would be more helpful than KS size chart in making the well-fitted brassiere.

• Child Health Nursing Research
• /
• v.26 no.2
• /
• pp.296-308
• /
• 2020

Purpose: The purpose of this study was to identify the noise level and frequency experienced by premature infants receiving incubator care in the neonatal intensive care unit (NICU). Methods: The participants were 20 premature infants receiving incubator care in the NICU of a university hospital in Daejeon Metropolitan city. The noise level was measured using a professional sound-level meter (ET-958, FLUS, Shenzhen, China) based on a noise classification table developed by the author. The data were analyzed with descriptive statistics, the t-test, analysis of variance, and Pearson correlation coefficients using SPSS for Windows version 22.0. Results: The average noise level experienced by premature infants receiving incubator care in the NICU was 51.25 dB (range: 45.0~81.7 dB). The frequency of noises was highest for factors related to nursing activities (40.3%), followed by human factors (29.1%), machine alarm sounds (20.1%), incubator operation (6.6%), and internal environmental factors (3.9%). Conclusion: According to the above results, the noise level experienced by premature infants receiving incubator care in the NICU exceeded the recommendations of the American Academy of Pediatrics. Therefore, it is necessary to develop an interventional program to reduce noise in the NICU, and to conduct follow-up studies to verify its effectiveness.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.69-77
• /
• 2015

MANET is composed of only the mobile nodes have a limited transmission range. The dynamic topology by the frequent movement of nodes makes routing difficult and is also cause exposed to security vulnerabilities. In this paper, we propose the security routing technique consisted of mechanism of two steps in order to respond effectively to attack by the modification of the routing information and transmit secure data. The hierarchical structure is used and the authentication node that issues the key of the nodes within each cluster is elected in this proposed method. The authentication node manages key issues and issued information for encrypting the routing information from the source node. The reliability value for each node is managed to routing trust table in order to secure data transmission. In the first step, the route discovery is performed using this after the routing information is encrypted using the key issued by the authentication node. In the second step, the average reliability value of the node in the found path is calculated. And the safety of the data transmission is improved after the average reliability value selects the highest path. The improved performance of the proposed method in this paper was confirmed through comparative experiments with CBSR and SEER. It was confirmed a better performance in the transmission delay, the amount of the control packet, and the packet transmission success ratio.

• Mass Spectrometry Letters
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2016

Simultaneous determination of three corticosteroids (clobetasol propionate, betamethasone dipropionate, fluticasone propionate) in moisturizers was performed by using liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Sample preparation was conducted by the liquid-liquid extraction (LLE). Moisturizers include emulsifying agent and it forms micelles. In order to improve the extraction efficiency of corticosteroids trapped in micelle, newly developed-optimized extraction conditions which can remove the matrix effect from moisturizers was applied with various pH conditions in LLE extraction stage of sample preparation. Thus, the addition of 10 μL of 1 M HCl into moisturizers sample before extraction could improve the extraction efficiency. For the quantitative analysis, SRM table that contained specific transition of all of target corticosteroids was created. The developed method was validated for linearity, accuracy, precision, limit of detection (LOD), limit of quantization (LOQ) and recovery. Over the 0.99 r² value was obtained in calibration standard range. Effective accuracy and precision were also obtained. LODs were below 31 ng/mL and LOQs were estimated below 94 ng/mL for all corticosteroids tested.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.143-152
• /
• 2015

Vitamin D contents in agricultural products and foods were quantified by high performance liquid chromomatography (HPLC) with a UV/Vis detector, using external standard methods. The results were confirmed with liquid chromatography tandem mass spectrometry (LC-MS/MS). After homogenization, samples were hydrolyzed by direct alkali saponification. Thereafter, fat-soluble components were extracted with n-hexane containing 0.01% butylated hydroxytoluene (BHT). Vitamin D contents in cereals were found to be in the range of $1.882{\sim}4.856{\mu}g/100g$. Juda's ear and oak mushroom contained high amounts of vitamin D, at 363.85 and $199.42{\mu}g/100g$ of edible portion, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1078-1089
• /
• 2014

The purpose of this research was to reveal how Jong Ga and its cuisine is perceived by Koreans and foreign tourists and to develop Jong Ga culinary culture for culinary tourism. The Inje Jong Ga was chosen since it is located in Jeonju, Hanok Village, which is a destination for tourists and gourmet enthusiasts. In-depth personal interviews were performed with Koreans and with foreign tourists who were visiting Korea. Interviews were done to provide deeper insight into the comments and subject matters. Most tourists selected "having one table setting for each (Doksang)" as the most distinctive part of Jong Ga and its cuisine. To develop the experience at a Jong Ga as a culinary destination, questionnaires were created to study six areas: preferences on length of stay, price range, food serving style, things to be improved, expectations by as a tourist at a Jong Ga, and the role of the food guide. Perceptions toward Jong Ga and its cuisine were generally positive, but the quality of service and lack of organization in establishments were perceived to be the negative factors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.159-169
• /
• 1998

The purpose of this study was to develop a large representative data base of market information for jeans apparel. This study was to observe consumer buying behavior and to determine the market share of various brands depending on several variables such as age and distribution regions. This study also analyzed the major factors in purchasing jeans for 17-29 age groups. The 660 questionnaires were distributed and 618 reliable ones were used for statistical analysis. A SAS statistical package including frequency' table, Chi-square test, factor analysis, analysis of variance(ANOVA), Duncan's multiple range test was used. The results of this study showed that consumer possessed about 6 pairs of jeans and bought about 3 pairs of jeans per year. The most recently purchased brand was Nix. Lots of brands were statistically significant at the segmented three age groups and in the five different distribution regions. The most popular type of design was the basic style. The result of factor analysis indicated 4 factors(quality/comfort, famous brand/fashion, mood/extrinsic attitude, economy). The result of ANOVA represented that three factors among them have influenced on the preferred design types.