• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.568-572
• /
• 2003

The height of valve body is limited to 30mm in the cook-top style gas valves for the domestic gas ranges. But the all the safety specifications of KS should be fulfilled and the magnetic power unit(MPU) should be installed in the valve body for the safety reason. The length of MPU body is longer than the 30mm that it should be located in the square direction of the knob shaft and therefore the implementation of the lever mechanism to transmit the press motion of the knob to the MPU valve is very difficult. In this paper, the hinged lever with inclined plate is used to transmit the press motion of the knob to the MPU valve. The analysis of the gas flow with using the commercial software of FLOW-3D shows that the gas flow capacity is fit for the domestic gas range. The performance and responsibility of the valve is tested for the mass production and the test results shows that the valve can be installed in the commercial gas range.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.60-67
• /
• 2016

The gas leak and explosion accident is able to give a fatal injury to nearby people from the explosion center and interest in effect of the explosion on the human body is increased. Accidents by Portable Butane Gas Range of a gas explosion accident occupy the most share. As a result, the injury on the human body frequently occur. However, It is situation that are experiencing difficulties in consequence analysis of explosion accidents owing to shortage of explosion power data and lack of research on the effect of the human body by the gas explosion. This paper acquire human injury data by performing the actual explosion experiment with Portable Butane Gas Range and evaluate power by explosion and effect of explosion on the human body to perform explosion simulation with LS-DYNA program. It is intended to contribute to the exact cause of the accident investigation and the same type of accident prevention.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.102-108
• /
• 2016

As a range of accidents happen frequently in our society due to safety insensitivity, researches on individual psychological characteristics related to safety behavior and on safety education are increasing. However, safety behavior research that targets university students as potential employees remains rare. Therefore, this research investigates individual characteristics and psychological factors that affect safety behaviors of university students. Research participants were 131 university students (80 males, 51 females) from the Gyeonggi-do and Chungnam areas. Psychological characteristics (self-regulation, cognitive failure, conscientiousness, and emotional stability) were included as variables that may predict university students' safety behaviors (habits, compliance, mistakes, and violations). The major findings of the study are as follows. Stepwise regression analysis showed conscientiousness was a major predictor explaining safety habits and safety compliance; Cognitive failure and emotional stability were main predictors explaining safety mistakes, and self-regulation was a major predictor explaining safety violations. These findings suggest that development of proper education programs focusing on individual characteristics would allow systematic improvement of safety behaviors of university students.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.3
• /
• pp.284-290
• /
• 2012

Infrared thermography uses infrared energy radiated from any objects above absolute zero temperature, and the range of its application has been constantly broadened. As one of the active test techniques detecting radiant energy generated when energy is applied to an object, ultrasound infrared thermography is a method of detecting defects through hot spots occurring at a defect area when 15~100 kHz of ultrasound is excited to an object. This technique is effective in detecting a wide range affected by ultrasound and vibration in real time. Especially, it is really effective when a defect area is minute. Therefore, this study conducted thermography through lock-in signal processing when an actual defect exists inside the austenite STS304 seamless pipe, which simulates thermal fatigue cracks in a nuclear power plant pipe. With ultrasound excited, this study could detect defects on the rear of a pipe by using an aluminium reflector. Besides, by regulating the angle of the aluminium reflector, this study could detect both front and rear defects as a single infrared thermography image.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.96-101
• /
• 2022

The Occupational Safety and Health Act holds that industrial safety helmets can be used as protective equipment to prevent the risk of injury in fall accidents. To better understand the importance given to PPE for the head, we analyzed the relevant regulations and guidelines in developed countries and reviewed the guidelines on testing safety helmets. The PPE regulations in Korea were notably different from those in other countries. First, except in Korea and Japan, safety helmets were used for protection against falling objects, flying objects, impact, or electric shock. However, the regulations did not recognize safety helmets as a PPE against fall hazards. Second, the impact energy applied on the helmet was within the range 50-100 J, and the helmet could protect only the upper part of the head against hazards such as the impact of falling objects, flying objects, etc. Third, in Korean regulations, the term "fall" was used in relation to the parts where the safety helmet was specified as a fall hazard PPE, unlike in other countries. We propose that the term "fall" should be revised to "shock" in Korean regulations for the safety helmet.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.309-310
• /
• 2014

Commercial gas burning appliances are classified by KGS AB338. Even though there are many types of gas appliances with different purposes and uses, common standards are applied to the appliances. Manifold of commercial gas range could often be corroded by salt water. Gas leaks and accidents could be occurred by the corrosion. According to suggestion of detailed material standards for manifold of commercial gas range, it could help to use safely and prevent gas accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.8-14
• /
• 2020

According to the statistics provided by Korean Maritime Safety Tribunal for the year 2018, the majority of marine accidents in the past four years have occurred in fishing boats and small-sized boats. Negligent behavior resulting from not looking outside and non-compliance with navigation laws are the primary reasons behind ship collisions. Although safety education and training are reinforced to prevent such accidents, they still occur frequently. Hence, technical methods are continuously being developed to reduce ship collisions caused by human cause. The objective of this study is to reduce ship collisions by employing the WAVE communication system, which has short transmitting and receiving periods that can be incorporated for high-speed small-sized vessels. In this study, the suitability of the communication range was examined, and the appropriate range and timing for avoidance motion were accordingly selected, and a control algorithm based on the same was thereby designed. Consequently normal operation of the collision avoidance system was verified by connecting and simulating the proposed WAVE communication router-controller-steering equipment.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.63-68
• /
• 2008

The ubiquitous technology is capable of innovating various area to constructing intelligent and network to all objects. This technology can construct network infrastructure to facilities for applying legacy industry and need to develop intelligent service that analyze context-aware through network. This paper derive and propose the introduction range of ubiquitous technology, which should be testified and analyzed network, and studied the detection and analysis of information for managing gas facilities. We investigate the current status of gas facilities and automatic reading system, testing and analyzing wireless personal area network and mobile communication by scalability, self-configuration, connection in underground. Furthermore, we propose modelization method for intelligent service and derive the introduction range for applying ubiquitous technologies for managing gas facilities.

• Journal of the Korean Home Economics Association
• /
• v.45 no.10
• /
• pp.97-111
• /
• 2007

This study examined the actual conditions of outdoor facilities and evaluated safety evaluations levels in playgrounds based on types of kindergartens. The samples for the survey were 100 kindergartens in Seongnam city Gyeonggi-Do province. Most outdoor facilities consisted of playgrounds with sand area and complex playing equipments, while wood-working area, sensory playing area, and mud playing area were less equipped than other facilities. In the case of outdoor playing facilities there were meaningful environmental differences within kindergartens. The public has less diversity in play areas and equipments and providing safety guidelines in playgrounds than privates. The score for the safety evaluations in the outdoor play environment was higher than average. As the range outdoor playing facilities increased, safety was dually considered, while kindergartens with a higher ratio of child-teacher numbers exhibited less consideration to playground safety.

• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.619-634
• /
• 2003

The purpose of this study was to the real situation of the safety education in the kindergarten by investigating the actual condition of the safety education and kindergarten teachers' knowledge about it. Questionnaire was adopted to obtain data required for pertinent analysis. The subjects were 234 kindergarten teachers located in Choongnam and Daejeon province. SPSSWIN v10.0 was utilized to calculate percentage, mean and standard deviation and to conduct t-test, one-way ANOVA and Duncan's multiple range test. The main results of this study were as follows. There was a significant difference between the actual condition of the safety education and kindergarten teachers' knowledge about it according to demographic variables. Especially, these differences were due to teachers' academic career, age, teaching experience, and the experience of bringing up children by themselves. The importance of the safety education must be emphasized. There were urgent needs to develop the way of teaching and the program about the safety education.