• 한국측량학회지
• /
• 제12권1호
• /
• pp.77-87
• /
• 1994

근거리 사진측량의 주요 이점은 비접촉 물체나 복잡한 형상을 측정하는 방법에 있어서 효과적인 측정방법이라 할 수 있다. 본 연구에서는 근거리 사진측량에 의한 전력 구조물의 미소변위 측정 기법을 개발하였다. 시간 변화에 따른 구조물의 변형을 측정하고자 할 경우, 근거리 사진측량 방법을 통해 절대 변형량을 효율적으로 산출하도록 하였다. 이를 통해 구조물 유지관리 시스템 구축 가능성을 모색할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.426-428
• /
• 1998

In this paper we describe a real time signal processing technique for the code correletion short range measurement sensor. Code correlation values are acquired via simple RC charging circuits within several tens of microsecond. Because the range measuring process is very fast and simple, the proposed technique is applicable to common near range targets as well as fast moving targets in real time. Some experimental results show the validity and usefulness of the proposed method.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.473-478
• /
• 2022

To overcome the capture-range problem in phase-diversity phase retrieval (PDPR), a geometrical-optics initial-estimate method is proposed to avoid a local minimum and to improve the accuracy of laser-wavefront measurement. We calculate the low-order aberrations through the geometrical-optics model, which is based on the two spot images in the propagation path of the laser, and provide it as a starting guess for the PDPR algorithm. Simulations show that this improves the accuracy of wavefront recovery by 62.17% compared to other initial values, and the iteration time with our method is reduced by 28.96%. That is, this approach can solve the capture-range problem.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.179-184
• /
• 2012

This study was performed to find out the measurement criteria of slip resistance from analysis of human gait and slips. Many kinds of slip resistance testers were developed based on mechanical friction testers. But, there are, as yet, no unambiguous slip resistance measurement methodologies and generally accepted safety criteria or safety thresholds for estimating slipping hazard exposures. Also, there are variety of measuring conditions between those testers. The measurement criteria should be tested within the range of human slipping conditions observed in biomechanical studies. It's results should clearly consider whether the devices reflect the human slipping conditions. In this study a dragsled type friction tester, which was constructed in accordance with ISO 15133 basically, was used. Test conditions were set in order to determine the range of measurement criteria. It is shown that drag velocity should be more than 1 m/s, acceleration be more than 10 $m/s^2$, contact time be less than 0.1sec, and contact pressure be within 350~400 kPa.

• 대한원격탐사학회지
• /
• 제34권3호
• /
• pp.535-543
• /
• 2018

최근 레벨계는 산업현장의 안전 및 유지관리와 연관되어 넓은 측정범위가 요구되는 추세이다. 일반적으로 레벨계의 측정범위를 확보하기 위해 측정환경을 개선하여 잡음을 감소시키거나 신호처리를 통해 신호의 왜곡을 보상하게 된다. FMCW 레이다 레벨계의 잡음과 신호의 왜곡은 레벨계의 근거리 특성에 영향을 주어 최소탐지거리가 감소되는 결과를 갖게 한다. 본 논문에서는 레벨계의 근거리 영역의 잡음을 제거하기 위해 window 함수와 비트 스펙트럼의 특성을 고려한 Equalizer 필터를 적용하여 최소탐지거리 성능을 개선하며 탐지가 상대적으로 어려운 레벨계 근거리의 측정 신뢰도를 높이고 탐지영역내의 측정 범위를 향상 시키고자 한다.

• 복식문화연구
• /
• 제8권4호
• /
• pp.549-561
• /
• 2000

The purpose of this study was to survey and analyze the age classification of women customers as a target market and sizes on a label that were actually produced by each brand in Korean national brands ; they were classified into size for bodice and bottom, and compared with the distribution of national data of women's body measurement. They were analyzed and classified by brand groups of 'miss', 'missy', 'Mrs.'and 'madam', The results were ; 1) It was found that recent products for ready-made for women's clothes tend to be designed with target to the measured ages classified by the range of five or ten years. The main practice was that for 'miss'brand group the age range was of five years, and for 'missy'brand group, ten years. And for 'Mrs'and 'madam'brand groups, it was of 15 or 20 years. So that, it is necessary to design their clothes based on their features of body considering the intervals of age. 2) 'Mrs'and 'madam'groups were most remarkable for their distribution into a vast range of sizes for three control dimensions and waist girth size when compared to 'miss'and 'missy'groups. The distribution of brand size had no relation with that of body measurement, and in particular, none was produced for short height size between 145 and 150 ㎝. For tall height size between 175 and 180 ㎝, many brand sizes were distributed while body measurement was few. It means that distribution of brand size was different from real distribution of body measurement was few. It means that distribution of brand size was different from real distribution of body measurement as a result that the larger the bust girth in such cases over 160 ㎝, the larger the size of hip girth. Even as for the height 155 and 160 ㎝ in which body measurement is concentrated, there were many problems because while sizes of 'large'bust girth and 'small'hip girth had a large distribution, their clothes were not produced.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.18-18
• /
• 2010

Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. With UHV gauges of uncertainties less than 15% and a calculated conductance of the orifice, about 35% of pumping speed uncertainties are experimentally derived in the pressure range of less than $10^{-6}$ mbar. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced an SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-3}$ mbar-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to less than $10^{-6}$ mbar with an uncertainty of 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.433-434
• /
• 2011

• 한국안전학회지
• /
• 제28권1호
• /
• pp.24-28
• /
• 2013

This article evaluates the accuracy of noise measurements for 37 noise measurement applications for iPhone 4 and iPhone 3Gs. Noise levels were measured using simultaneously a precision sound level meter and iPhones installed noise measurement applications at the levels of 70 dB, 80 dB and 90 dB at 1,000 Hz. Measurement errors were estimated by subtracting two measurements between iPhone and sound level meter. It was found that measurement errors of 34 applications(89.2%) were greater than ${\pm}2$ dB which is the maximum allowable error range for the Type II sound level meter. It was only 4 applications that measurement errors lie within ${\pm}2$ dB error range. There was no significant differences among measurements with four iPhone 4s. However, there were significant differences between the measurements with iPhone 4 and iPhone 3Gs using the same application. It was due to the different hardware specifications such as microphone. Therefore, noise measurement applications, for example, which has to utilize hardware of the smartphone, should be programmed to identify hardware specifications and to adopt appropriate correction factors upon hardware specifications. In conclusion, it is necessary to check accuracy and validity before using the noise measurement applications for iPhones. Also, it was suggested that it should develop an evaluation guideline or protocol on accuracy testing for the measurement applications using a smartphone.

• 한국음향학회지
• /
• 제42권6호
• /
• pp.511-518
• /
• 2023

수중 이동체의 시험평가 과정에서 정확한 거리 추정은 중요한 요소 가운데 하나이다. 특히, 도달 시간 값을 이용하여 거리를 추정하는 경우 상관 특성 등으로 인해 처프 신호인 Linear Frequency Modulation(LFM)과 같은 신호의 적용성이 높다. 하지만 이동성이 있는 도플러 천이 환경에서는 거리-도플러 커플링 효과로 인하여 측정 오류가 발생할 수 있다. 이에 본 논문에서는 거리-도플러 커플링 효과를 보상하여 도달 시간 값의 측정 오류를 감소시키는 신호를 제시한다. 제안된 신호는 2종류의 LFM 신호를 중첩하여 구성하였으며, 거리-도플러 커플링 효과를 최소화할 수 있다. 시뮬레이션을 통해 제안된 신호가 수중 이동체의 거리 추정에 있어서 거리-도플러 커플링 효과를 보상하여 도달 시간 값의 측정 오류를 줄이는 방법임을 확인하였다.