• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.356-359
• /
• 2006

A monolithic SiGe HBT variable gain driver amplifier(VGDA) with high dB-linear gain control and high linearity has been developed as a driver amplifier with ground-shielded microstrip lines for 5-GHz transmitters. The VGDA consists of three blocks such as the cascode gain-control stage, fixed-gain output stage, and voltage control block. The circuit elements were optimized by using the Agilent Technologies' ADSs. The VGDA was implemented in STMicroelectronics' 0.35${\mu}m$ Si-BiCMOS process. The VGDA exhibits a dynamic gain control range of 34 dB with the control voltage range from 0 to 2.3 V in 5.15-5.35 GHz band. At 5.15 GHz, maximum gain and attenuation are 10.5 dB and -23.6 dB, respectively. The amplifier also produces a 1-dB gain-compression output power of -3 dBm and output third-order intercept point of 7.5 dBm. Input/output voltage standing wave ratios of the VGDA keep low and constant despite change in the gain-control voltage.

• Computers and Concrete
• /
• v.23 no.4
• /
• pp.267-272
• /
• 2019

In order to study the effect of moisture on the compressive strength of low-strength hollow concrete blocks, an experimental study was carried out on 96 samples of locally manufactured hollow concrete blocks collected from three different locations. Uniaxial compression tests were conducted on dry specimens and three types of saturated specimens with moisture contents of 30%, 50% and 80% respectively. The range of moisture content adopted covered the range within which the concrete block samples are saturated in the dry and monsoon seasons. The compressive strength of low-strength hollow concrete blocks decreases with increase in moisture content and the relationship between compressive strength of hollow concrete blocks and their moisture content can be considered to be linear. However, the strength degradation of 30% moist concrete blocks with respect to dry blocks is relatively low and can be considered to be comparable to dry concrete blocks. A formula indicating the relationship between the moisture content and compressive strength of low-strength hollow concrete blocks is also proposed.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.51-60
• /
• 2020

Estimation of passive earth pressure is an important factor in anchor block, temporary retaining wall and support block of raker that resist lateral earth pressure. In practice, due to ease of use, it is common to estimate the earth pressure using the theory of Coulomb and Rankine, which assumes the failure plane as a straight line. However, the passive failure plane generated by friction between the wall surface and the soil forms a complex failure plane: a curve near the wall and a flat plane near the ground surface. In addition, the limit displacement where passive earth pressure is generated is larger compared to where the active earth pressure is generated. Thus, it is essential to calculate the passive earth pressure that occurs at the allowable displacement range in order to apply the passive earth pressure to the design for structural stability reasons. This study analyzed the mobilized passive earth pressured to various displacement ranges within the passive limit displacement range using the semi-empirical method considering the complex failure plane.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1603-1611
• /
• 2004

The validity of 'modified overlay model' to describe the cyclic behavior of annealed 316L stainless steel at room temperature was investigated. Material parameters(~f$_{i}$, m$_{i}$b, η, E) fur the model were obtained through constant strain amplitude test. The strain amplitude dependency of elastic limit and cyclic hardening, which were the characteristics of this model, were considered. Eight subelements were used to describe the nonlinearity of the hysteresis loops. The calculated hysteresis curve in each condition (0.5％, 0.7％, 0.9％ train amplitude test) was very close to the experimental one. Two tests, incremental step test and 5-step test, ere performed to check the validity of 'modified overlay model'. The elastic limit was saturated to the one of the highest strain amplitudes of the block in the incremental step test, so it seemed to be Masing material at the stabilized block. Cyclic hardening was successfully described in the increasing sequence of the strain amplitude in 5-step test. But, the slight cyclic softening followed by higher strain amplitude would not be able to simulate by'modified overlay model'. However, the discrepancy induced was very small between the calculated hystereses and the experimental ones. In conclusion,'Modified overlay model'was proved to be appropriate in strain range of 0.35％~ 1.0％..0％.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.353-361
• /
• 2020

VVC (Versatile Video Coding) is a new video compression technique that is being standardized, and it supports HD / UHD / 8K video, and High Dynamic Range (HDR) video with a goal of approximately 2 times higher coding efficiency than the conventional HEVC. It also aims to support a variety of functionalities such as screen content coding, adaptive resolution changes, and independent sub-pictures. In this paper, we investigate the signaling process of intra prediction mode first, and develop an effective coding method of the chroma intra prediction mode. In case of the DM mode, the proposed method simplifies the prediction mode of the chorma intra prediction mode when referring to the angular mode of the luminance block. It can improve coding efficiency of the chroma intra prediction mode, and the proposed process can also consider the size of the block in order to further improve its coding efficiency.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.1
• /
• pp.75-82
• /
• 2016

Paroxetine, a selective serotonin reuptake inhibitor (SSRI), has been reported to have an effect on several ion channels including human ether-a-go-go-related gene in a SSRI-independent manner. These results suggest that paroxetine may cause side effects on cardiac system. In this study, we investigated the effect of paroxetine on Kv1.5, which is one of cardiac ion channels. The action of paroxetine on the cloned neuronal rat Kv1.5 channels stably expressed in Chinese hamster ovary cells was investigated using the whole-cell patch-clamp technique. Paroxetine reduced Kv1.5 whole-cell currents in a reversible concentration-dependent manner, with an $IC_{50}$ value and a Hill coefficient of $4.11{\mu}M$ and 0.98, respectively. Paroxetine accelerated the decay rate of inactivation of Kv1.5 currents without modifying the kinetics of current activation. The inhibition increased steeply between -30 and 0 mV, which corresponded with the voltage range for channel opening. In the voltage range positive to 0 mV, inhibition displayed a weak voltage dependence, consistent with an electrical distance ${\delta}$ of 0.32. The binding ($k_{+1}$) and unbinding ($k_{-1}$) rate constants for paroxetine-induced block of Kv1.5 were $4.9{\mu}M^{-1}s^{-1}$ and $16.1s^{-1}$, respectively. The theoretical $K_D$ value derived by $k_{-1}/k_{+1}$ yielded $3.3{\mu}M$. Paroxetine slowed the deactivation time course, resulting in a tail crossover phenomenon when the tail currents, recorded in the presence and absence of paroxetine, were superimposed. Inhibition of Kv1.5 by paroxetine was use-dependent. The present results suggest that paroxetine acts on Kv1.5 currents as an open-channel blocker.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.259-267
• /
• 2014

PEBAX[poly(ether-block-amide)-ZIF-8(zeolitic imidazolate framework) composite membranes were prepared with different amounts of ZIF-8; 0, 1, 3, 7, 10, and 20 wt%. Gas permeation experiment were performed by varying the temperature of 25, 35, $40^{\circ}C$ under condition $6kgf/cm^2$. Gas permeability of $C_3H_6$, $C_3H_8$ and selectivity ($C_3H_6/C_3H_8$) were investigated by increasing the amount of ZIF-8 in the PEBAX. The gas permeability of $C_3H_6$ and $C_3H_8$ increased as ZIF-8 content increased among 0 to 7 wt% range and decreased among 7 to 20 wt% range. When the ZIF contents of PEBAX-ZIF composite membrane were 7 wt%, the selectivity ($C_3H_6/C_3H_8$) was taken between 3.6 and 3.8 value and also had the lowest activation energy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.101-106
• /
• 2014

This paper presents a wide dynamic range radio-frequency (RF) root-mean-square (RMS) power detector using an automatic gain control (AGC) loop. The AGC loop consists of a variable gain amplifier (VGA), RMS conversion block and gain control block. The VGA exploits dB-linear gain characteristic of the cascade VGA. The proposed circuit utilizes full-wave squaring and generates a DC voltage proportional to the RMS of an input RF signal. The proposed RMS power detector operates from 500MHz to 5GHz. The detecting input signal range is from 0 dBm to -70 dBm or more with a conversion gain of -4.53 mV/dBm. The proposed RMS power detector is designed in a 65-nm 1.2-V CMOS process, and dissipates a power of 5 mW. The total active area is $0.0097mm^2$.

• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.71-86
• /
• 2021

This paper focuses on the development and assessment of the expected damage for the rocking response of rigid anchored blocks, with irregular geometry and non-uniform mass distribution, considering the site conditions and the seismicity of Mexico City. The non-linear behavior of the restrainers is incorporated to evaluate the pure tension and tension-shear failure mechanisms. A probabilistic framework is performed covering a wide range of block sizes, slenderness ratios and eccentricities using physics-based ground motion simulation. In order to incorporate the uncertainties related to the propagation of far-field earthquakes with a significant contribution to the seismic hazard at study sites, it was simulated a set of scenarios using a stochastic summation methods of small-earthquakes records, considered as Empirical Green's Function (EGFs). As Engineering Demand Parameter (EDP), the absolute value of the maximum block rotation normalized by the body slenderness, as a function of the peak ground acceleration (PGA) is adopted. The results show that anchorages are more efficient for blocks with slenderness ratio between two and three, while slenderness above four provide a better stability when they are not restrained. Besides, there is a range of peak intensities where anchored blocks located in soft soils are less vulnerable with respect to those located in firm soils. The procedure used in here allows to take decisions about risk, reliability and resilience assessment of different types of contents, and it is easily adaptable to other seismic environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.996-1003
• /
• 2022

In this paper, we present a new method for determining the scan line and range for vision-based 1-D barcode recognition. This is a study on how to detect valid barcode representative points and directions by applying the DBSCAN clustering method based on block HOG (histogram of gradient) and determine scan lines and barcode crosslines based on this. In this paper, the minimum and maximum search techniques were applied to determine the cross-line range of barcodes based on the obtained scan lines. This can be applied regardless of the barcode size. This technique enables barcode recognition even by detecting only a partial area of the barcode, and does not require rotation to read the code after detecting the barcode area. In addition, it is possible to detect barcodes of various sizes. Various experimental results are presented to evaluate the performance of the proposed technique in this paper.