• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.412-417
• /
• 2015

This study investigated to recycle geobond and ash produced in thesewage sludge incinerator using reduction/stabilization. Nonsintering process was performed by binding cement (High Early Strength Portland cement, Micro cement), geobond and sand mixed with sewage sludge ash (SSA). Chemical ingradients of the sewage sludge ash was mainly composed of $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO and others, which were similar to those of the each binders consisting High Early Strength Portland cement, Micro cement and geobond. Results showed that unconfined the long term compressive strength could be obtained components of sewage sludge ash. It exceeded more than double score 64.6 MPa of the Korean standard ($22.54MPa=229.7kg/cm^2$). Microstructure of solidified block for the different admixture was related to the compressive strength according to SEM analysis. Optimum mixing range of the sewage sludge ash to each binders were found to be 10~40% which can widly safely regulate the confined a long term compressive strength. The best binder of long term compressive strengh was revealed Geobond more than High Early Strength Portland cement and Micro cement. This study revealed the sewage sludge ash can be partial replacement of the inorganic binder & application block for recycling.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.76-85
• /
• 1999

The degradation of image quality by block loss is more serious in fractal coded images with the error propagation due to mapping from the lost blocks than in DCT coded images. Therefore. a new algorithm is presented for recovering the blocks lost in the transmission through the lossy network as A TM network of the images coded by Jacquins fractal coding. Jacquins fractal code is divided into two layers of header code and main code according to its importance. The key technique of the proposed BLRA (block loss recovery algorithm) is a fractal extrapolation that estimates the lost pixels by using the contractive mapping parameters of the neighboring range blocks whose characteristics are similar to a lost block. The proposed BLRA is applied to the lost blocks in the iteration of decoding. Some experimental results show the proposed BLRA yields excellent performance in PSNR as well as subjective quality.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.2
• /
• pp.143-153
• /
• 2006

Temporomandibular joint(TMJ) ankylosis is characterized by the formation of bony or fibrous mass, which replaces the normal articulation. Ankylotic block formation causes reduction of mandibular mobility, particularly hindering mouth opening, due to a mechanical block of the condylar head in its roto-transfatory motion. Surgery in TMJ ankylosis treatment entails complete ankylotic block removal and subsequent arthroplasty, possibly with autologous tissue between articular surfaces or heterologous material to restore the anatomic structure and normal function. Temporalis myofascial flap holds great promise for the reconstruction of various maxillofacial defects. In more recent years, a pedicled temporalis myofascial flap has been advocated in TMJ ankylosis surgery. Advantages of the temporalis myofascial flap in TMJ reconstruction include close proximity to the TMJ, adequate blood supply from the internal maxillary artery, and its attachment to the coronoid process, which provides movement of the flap during function, simulating physiologic action of the disc. This study evaluated 8 patients(11 TMJs) affected by TMJ ankylosis. All patients underwent surgical treatment of the removal of the ankylotic block and subsequent interpositional arthroplasty with temporalis myofascial flap. Bilateral TMJ ankylosis was observed in 3 patients(6 TMJs), right-sides in 3 patients, left-sided in 2 patients. Epipathogenesis was traumatic in 6 patients(8 TMJs), ankylosing spondylitis in 2 patients(3 TMJs). In 3 patients coronoidotomy was underwent. Average follow-up was 16.8 months after surgery, with a range of 7 to 28 months. No patients underwent additional TMJ procedures after the temporalis myofascial flap. All patients showed a distinctive improvement both in articular functionality and symptoms. We found that temporalis myofascial flap is very valuable in reconstruction of TMJ ankylosis.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.21-29
• /
• 2002

This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.135-139
• /
• 1996

Intercostal nerve blockade with local anesthetics has been used extensively in the past to provide pain relief following thoracotomy. Its popularity fell, for a period, probably due to increasing use of epidural analgesia. More recently, interest has focused on intercostal nerve block with the introduction of variously sited catheters. Two epidural catheters were placed under direct vision, in the intercostal spaces just above and below the wound by feeding the catheters posteriorly from the wound edges, superficial to the parietal pleura. Bupivacaine 0.25%. Was infused continuously at a rate of 5 ml/hour through each of the two intercostal catheters. Each catheter was primed with 10 ml/hour through each of the two intercostal catheters. Each catheter was primed with 10 ml of 0.25% bupivacaine. Postoperative vital signs resembled preoperation data. Arterial carbon dioxide pressure ($PaCO_2$) was unchanged and arterial oxygen pressure ($PaO_2$) was increased during two days after surgery because oxygen was administered at 21/min. Forced vital capacities (FVC) and forced expiratory volume in 1 second ($FEV_1$) were decreased the day of operation but restored to preoperative value from second operation day. VAS were increased on operation day but decreased from second operation day. Motion range of arms were not impaired. We concluded that continuous intercostal nerve block through catheters placed during thoracotomy in the adjacent intercostal spaces is a simple and effective method for management of the post-thoracotomy pain.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.193-197
• /
• 1998

Frozen shoulder is known as a self-limited disease. But, its long duration and pain nature can make the patients debilitative. And most patients cannot tolerate a chronically painful extremity and are concerned about the possibility of developing permanent dysfunction. In painful phase of frozen shoulder, some aggressive mordalties as like trigger point injection or suprascapular nerve block can beneficial to: reduce discomfort and pain. In order to document clinical results, we evaluated the results of 134 frozen shoulders treated with trigger point injection and/or suprascapular nerve block at Kyungpook National University Hospital, from January 1995 to April 1997. The treatment group was divided into 3 modalities: 17 cases in trigger point injection(TPI), 39 cases in suprascapular nerve block(SSB), and 78 cases in both methods. The supportive treatment including oral medication, heat and stretching exercise was also applied. The average age at the time of diagnosis was 57 years old and average follow-up time was 18 months. The results were as follows: Average time of significant improvement in pain was 9 days. Eighty-eight percent (119 cases) was improved in pain and range of motion after injecllion treatments; 82%(14/17) with TPI, 85%(33/39) with SSB, and 92%(72/78) with both. Early improvement of paih within 1 week was 72% in the treatment-responsive group, in which TPI group has 100% response(14/14) and sse has 94% response(31/33)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.431-437
• /
• 2000

Standard Test Block(STB) for UT(Ultrasonic Testing) is a block approved by authoritative for material, shape and quality. STB is used for characteristic tests, sensitivity calibration and control of the time base range of UT inspection devices. The material, size and chemical components of STB should be strictly controled to meet the related standards such as ASTM and JIS because it has an effect upon sensitivity, resolution and reproductivity of UT. The STBs which are not approved are sometimes used because the qualified STBs are very expensive. So, the purpose of this study is to survey the characteristics, quality and usability of Non-Standardized Test Blocks. Non-Standardized Test Blocks did not meet the standard requirements in size or chemical components, and ultrasonic characteristics. Therefore if the Non-Standardized Test Blocks are used without being tested, it's likely to cause errors in detecting the location and measuring the size of the defects.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.2
• /
• pp.71-77
• /
• 2006

The goal of this study was to analyze the effects of genistein, a widely used tyrosine kinase inhibitor, on cloned Shaw-type $K^+$ currents, Kv3.1 which were stably expressed in Chinese hamster ovary (CHO) cells, using the whole-cell configuration of patch-clamp techniques. In whole-cell recordings, genistein at external concentrations from 10 to $100{\mu}M$ accelerated the rate of inactivation of Kv3.1 currents, thereby concentration-dependently reducing the current at the end of depolarizing pulse with an $IC_{50}$ value of $15.71{\pm}0.67{\mu}M$ and a Hill coefficient of $3.28{\pm}0.35$ (n=5). The time constant of activation at a 300 ms depolarizing test pulses from -80 mV to +40 mV was $1.01{\pm}0.04$ ms and $0.90{\pm}0.05$ ms (n=9) under control conditions and in the presence of $20{\mu}M$ genistein, respectively, indicating that the activation kinetics was not significantly modified by genistein. Genistein $(20{\mu}M)$ slowed the deactivation of the tail current elicited upon repolarization to -40 mV, thus inducing a crossover phenomenon. These results suggest that drug unbinding is required before Kv3.1 channels can close. Genistein-induced block was voltage-dependent, increasing in the voltage range $(-20\'mV{\sim}0\'mV)$ for channel opening, suggesting an open channel interaction. Genistein $(20{\mu}M)$ produced use-dependent block of Kv3.1 at a stimulation frequency of 1 Hz. The voltage dependence of steady-state inactivation of Kv3.1 was not changed by $20{\mu}M$ genistein. Our results indicate that genistein blocks directly Kv3.1 currents in concentration-, voltage-, time-dependent manners and the action of genistein on Kv3.1 is independent of tyrosine kinase inhibition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1925-1938
• /
• 2001

In this paper, a new block-matching algorithm for standard video encoder is presented. The slice competition method is proposed as a new scheme, as opposed to a coarse-to-fine approach. The order of calculating the SAD(Sum of Absolute Difference) to fad the best matching block is changed from a raster order to a dispersed one. Based on this scheme, the increasing SAD curve during its calculation is more linear than that of other curves. Then, the candidates of low probability can be removed in the early stage of calculation. And new MV prediction technique with an adaptive search range scheme also assists the proposed block-matching algorithm. As a result, an average of 13% improvement in computational power is recorded by only the proposed MV prediction technique. Synthetically, the computational power is reduced by 3977∼77% than that of the conventional BMAs. The average MAD is always low in various sequences. The results are also very close to the MAD of the full search block-matching algorithm.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.185-191
• /
• 1999

An air-conditioning system based on the chemical heat storage principle was considered. $H_2O$ was chosen as the reaction gas and the working fluid as well. Na$_2$S, CaCl$_2$, MnCl$_2$, BaCl$_2$, MgCl$_2$, Fe$_2$(SO$_4$)$_3$ and MnSO$_4$ were tested as the solid reactants by using Cahn pressure balance. Na$_2$S was superior to other salts in respect of high capability of absorption of water gas, 5 moles of $H_2O$ per unit mole of Na$_2$S, and adequate temperature of adsorption, $65^{\circ}C$ at 7torr, and of desorption, 13$0^{\circ}C$ at 76torr. Clausius-Clapeyron diagram of Na$_2$S was obtained via adsorption experiments at several vapor pressures of water gas. To enhance heat and mass transfer characteristics, usually below 1W/m K, of the reactor bed of general adsorption systems, expanded graphite block was adapted as the support of Na$_2$S salt. Expanded graphite blocks had thermal conductivity values of 20~80W/mK with respect to 100~400kg/㎥ of block bulk density. Permeability values of expanded graphite blocks were 10$^{-13}$ ~ 10$^{-14}$ $m^2$ with respect to 100~300kg/㎥ of block bulk density showing highly decreasing values of permeability, below 10$^{-l4}$$m^2$, in the range of above 150kg/㎥ of block bulk density.y.