• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.74-77
• /
• 2000

Ta-doped PZT thin films prepared by reactive co-sputtering method could be transformed into single grained perovskite structure utilizing physical etching of Pt bottom electrode. It is found that PZT perovskite phase on damaged (111) Pt electrode by IMD was more easily crystallized than random oriented Pt electrode and less crystallized than (111) Pt electrode. This shows that amorphized Pt electrode surface by IMD process has an effect on crystallization of PZT perovskite phase. 40$\mu\textrm{m}\times40\mu\textrm{m}$ square shape single grain PZT array could be obtained utilizing the difference of incubation time for nucleation of rosettes between ion damaged Pt and (111) oriented Pt electrode. Single grained PZT thin films show low leakage current density of $1\times10^{-7}$ A/$\textrm{cm}^2$ and high break down field of 440kV/cm. The loss of remanent polarization after $10^{11}$ cycles was less than 15% of initial value.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.2027-2032
• /
• 2007

[ ${\alpha}$ ]-Synuclein is the major component of Lewy bodies and responsible for the amyloid deposits observed in Parkinson's disease. Ordered filamentous aggregate formation of the natively unfolded ${\alpha}$-synuclein was investigated in vitro with the periodic ultrasonication. The ultrasonication induced the fibrillation of ${\alpha}$-synuclein, as the random structure gradually converted into a ${\beta}$-sheet structure. The resulting fibrils obtained at the stationary phase appeared heterogeneous in their size distribution, with the average length and height of $0.28\;{\mu}m{\pm}0.21\;{\mu}m$ and $5.6\;nm{\pm}1.9\;nm$, respectively. After additional extensive ultrasonication in the absence of monomeric ${\alpha}$-synuclein, the equilibrium between the fibril formation and its breakdown shifted to the disintegration of the preexisting fibrils. The resulting fragments served as nucleation centers for the subsequent seed-dependent accelerated fibrillation under a quiescent incubation condition. This self-seeding amplification process depended on the seed formation and subsequent alterations in their properties by the ultrasonication to a state that accretes the monomeric soluble protein more effectively than their reassociation of the seeds back to the original fibrils. Since many neurodegenerative disorders have been considered to be propagated via the seed-dependent amyloidosis, this study would provide a novel aspect of the significance of the seed structure and its properties leading to the acce]erated amyloid formation.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.562-565
• /
• 2013

The high purity Al foil, which has an enlarged surface area by electrochemical etching process, has been used as an anode for an aluminum electrolytic capacitor. Etch pits are randomly distributed on the surface because of the existence of surface irregularities such as impurity and random nucleation of pits. Even though a large surface area was formed on the tunnel-etched Al, its applications to various fields were limited due to non-uniform tunnel morphologies. In this work, the selective electrochemical etching of aluminum was carried out by using a patterned mask fabricated by photolithographic method. The formation of etch pits with uniform distribution has been demonstrated by the optimization of experimental conditions such as current density and etching solution temperature.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.25-35
• /
• 2003

A series of random poly(ethylene-co-1,4-butylene terephthalate)s (PEBTs), as well as poly(ethylene terephthalate) (PET) and poly(1,4-butylene terephthalate) (PBT), were synthesized by the bulk polycondensation. Their composition, molecular weight, and thermal properties were determined. All the copolymers are crystallizable, regardless of the compositions, which may originate from both even-atomic-numbered ethylene terephthalate and butylenes terephthalate units that undergo inherently crystallization. Non-isothermal crystallization exotherms were measured over the cooling rate of 2.5-20.0 K/min by calorimetry and then analyzed reasonably by the modified Avrami method rather than the Ozawa method. The results suggest that the primary crystallizations in the copolymers and the homopolymers follow a heterogeneous nucleation and spherulitic growth mechanism. However, when the cooling rate increases and the content of comonomer unit (ethylene glycol or 1,4-butylene glycol) increases, the crystallization behavior still becomes deviated slightly from the prediction of the modified Avrami analysis, which is due to the involvement of secondary crystallization and the formation of relatively low crystallinity. Overall, the crystallization rate is accelerated by increasing cooling rate but still depended on the composition. In addition, the activation energy in the non-isothermal crystallization was estimated.

• Monthly Notices of the Royal Astronomical Society
• /
• v.496 no.4
• /
• pp.4787-4821
• /
• 2020

The merging rate of cosmic structures is computed, relying on the ansatz that they can be predicted in the initial linear density field from the coalescence of critical points with increasing smoothing scale, used here as a proxy for cosmic time. Beyond the mergers of peaks with saddle points (a proxy for halo mergers), we consider the coalescence and nucleation of all sets of critical points, including wall-saddle to filament-saddle and wall-saddle to minima (a proxy for filament and void mergers, respectively), as they impact the geometry of galactic infall, and in particular filament disconnection. Analytical predictions of the one-point statistics are validated against multiscale measurements in 2D and 3D realizations of Gaussian random fields (the corresponding code being available upon request) and compared qualitatively to cosmological N-body simulations at early times (z ≥ 10) and large scales (≥5 Mpc h^-1). The rate of filament coalescence is compared to the merger rate of haloes and the two-point clustering of these events is computed, along with their cross-correlations with critical points. These correlations are qualitatively consistent with the preservation of the connectivity of dark matter haloes, and the impact of the large-scale structures on assembly bias. The destruction rate of haloes and voids as a function of mass and redshift is quantified down to z = 0 for a Lambda cold dark matter cosmology. The one-point statistics in higher dimensions are also presented, together with consistency relations between critical point and critical event counts.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.676-682
• /
• 2009

Devolatilization of the Refuse Derived Fuel(RDF) which is produced at WonJu in Korea was characterized in air atmosphere with variation of heating rate(10, 20 and $30^{\circ}C/min$) in TGA. The results of TG Analysis have shown that the pyrolysis and char combustion of the RDF occurred in the range of $350{\sim}700^{\circ}C$ depending on the heating rate. Activation energy of the RDF which was determined by using Friedman and Ozawa-Flynn-Wall method was in the range of 14.44~18.40 kcal/mol. Also, reaction order(n) and pre-exponential factors(A) were 1.219 and $3.02{\times}10^5$ by using Friedman method, respectively. In order to find out the devolatilization mechanism of the RDF, twelve solid-state mechanisms defined by Coats Redfern Method were tested. The results of the Coats Redfern Method have shown that chemical reaction is the effective mechanism by comparison with the value of the activation energy which was derived from the Friedman and Flynn-Wall-Ozawa method and correlation coefficient from twelve solid-state mechanisms of Coats Redfern Method. The solid state decomposition mechanism of the RDF was found to be a decelerated $F_1$ type, random nucleation with one nucleus on the individual particle.

• Korean Journal of Microbiology
• /
• v.39 no.2
• /
• pp.76-82
• /
• 2003

To prepare evolved PHB depolymerase with increased activity for PHB or P(3HB-co-3HV) compared to the activity of the original PHB depolymerase from Alcaligenes faecalis T1, random mutation of the cloned PHB depolymerase gene was performed by using a DNA shuffling method. A library of mutated PHB depolymerase genes from A. faecalis T1 was fused to the ice nucleation protein (INP) gene from Pseudomonas syringae in pJHCl 1 and approximately 7,000 transformants were isolated. Using M9 minimal medium containing PHB or P(3HB-co-3HV) as the carbon source, mutants showing alteration in PHB depolymerase activity were selected from the transformants. The PHB depolymease activity of the transformants was confirmed by the formation of halo around colony and the turbidity decrease tests using culture supermatants. The catalytic activity of PHB depolymerase of the best mutant II-4 for PHB or P(3HB-co-13 mol% 3HV) was approximately 1.8-fold and 3.2-fold, respectively, higher than that of the original PHB depolymerase. DNA sequence analysis revealed that three amino acid residues (Ala209Val, Leu258Phe, and Asp263Thr) were substituted in II-4. From the mutational analysis, it was presumed that the substitution of amino acids near catalytic triad to more hydrophobic amino acids enhance the catalytic activity of PHB depolymerase from A. faecalis T1.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.363-363
• /
• 2014

Ruthenium (Ru) has attractive material properties due to its promising characteristics such as a low resistivity ($7.1{\mu}{\Omega}{\cdot}cm$ in the bulk), a high work function of 4.7 eV, and feasibility for the dry etch process. These properties make Ru films appropriate for various applications in the state-of-art semiconductor device technologies. Thus, it has been widely investigated as an electrode for capacitor in the dynamic random access memory (DRAM), a metal gate for metal-oxide semiconductor field effect transistor (MOSFET), and a seed layer for Cu metallization. Due to the continuous shrinkage of microelectronic devices, better deposition processes for Ru thin films are critically required with excellent step coverages in high aspect ratio (AR) structures. In these respects, atomic layer deposition (ALD) is a viable solution for preparing Ru thin films because it enables atomic-scale control of the film thickness with excellent conformality. A recent investigation reported that the nucleation of ALD-Ru film was enhanced considerably by using a zero-valent metallorganic precursor, compared to the utilization of precursors with higher metal valences. In this study, we will present our research results on the synthesis and characterization of novel ruthenium complexes. The ruthenium compounds were easy synthesized by the reaction of ruthenium halide with appropriate organic ligands in protic solvent, and characterized by NMR, elemental analysis and thermogravimetric analysis. The molecular structures of the complexes were studied by single crystal diffraction. ALD of Ru film was demonstrated using the new Ru metallorganic precursor and O2 as the Ru source and reactant, respectively, at the deposition temperatures of $300-350^{\circ}C$. Self-limited reaction behavior was observed as increasing Ru precursor and O2 pulse time, suggesting that newly developed Ru precursor is applicable for ALD process. Detailed discussions on the chemical and structural properties of Ru thin films as well as its growth behavior using new Ru precursor will be also presented.