• Structural Engineering and Mechanics
• /
• v.38 no.4
• /
• pp.443-457
• /
• 2011

The loss of strength in a structure as a result of cyclic loads over a period of life time is an important phenomenon for the life-cycle analysis. Service loads are accentuated at the areas of stress concentration, mainly at the connection of components. Structural components unavoidably are affected by defects such as surface scratches, surface roughness and weld defects of random sizes, which usually occur during the manufacturing and handling process. These defects are shown to have an important effect on the fatigue life of the structural components by promoting crack initiation sites. The value of equivalent initial flaw size (EIFS) is calculated by using the back extrapolation technique and the Paris law of fatigue crack growth from results of fatigue tests. We try to analyze the effect of EIFS distribution in a multiple site damage (MSD) specimen by using the extended finite element method (XFEM). For the analysis, fatigue tests were conducted on the centrally-cracked specimens and MSD specimens.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2803-2815
• /
• 2021

This paper addresses the uncertainty quantification and sensitivity analysis of a depleted light-water fuel assembly of the Turkey Point-3 benchmark. The uncertainty of the fuel assembly decay heat and isotopic densities is quantified with respect to three different groups of diverse parameters: nuclear data, assembly design, and reactor core operation. The uncertainty propagation is conducted using a two-step analysis code system comprising the lattice code STREAM, nodal code RAST-K, and spent nuclear fuel module SNF through the random sampling of microscopic cross-sections, fuel rod sizes, number densities, reactor core total power, and temperature distributions. Overall, the statistical analysis of the calculated samples demonstrates that the decay heat uncertainty decreases with the cooling time. The nuclear data and assembly design parameters are proven to be the largest contributors to the decay heat uncertainty, whereas the reactor core power and inlet coolant temperature have a minor effect. The majority of the decay heat uncertainties are delivered by a small number of isotopes such as ²⁴¹Am, ¹³⁷Ba, ²⁴⁴Cm, ²³⁸Pu, and ⁹⁰Y.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.281-291
• /
• 2013

A hypothetical repository was assumed to be located at the KURT (KAERI Underground Research Tunnel) site, and the travel times of radionuclides released from three source positions were calculated. The groundwater flow around the KURT site was simulated and the groundwater pathways from the hypothetical source positions to the shallow groundwater were identified. Of the pathways, three pathways were selected because they had highly water-conductive features. The transport travel times of the radionuclides were calculated by a TDRW (Time-Domain Random Walk) method. Diffusion and sorption mechanisms in a host rock matrix as well as advection-dispersion mechanisms under the KURT field condition were considered. To reflect the radioactive decay, four decay chains with the radionuclides included in the high-level radioactive wastes were selected. From the simulation results, the half-life and distribution coefficient in the rock matrix, as well as multiple pathways, had an influence on the mass flux of the radionuclides. For enhancing the reliability of safety assessment, this reveals that identifying the history of the radionuclides contained in the high-level wastes and investigating the sorption processes between the radionuclides and the rock matrix in the field condition are preferentially necessary.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.159-164
• /
• 2011

This study was performed in order to determine optimum flushing solution using the direct embryo collection (DEC). Donors, at random stages of the estrous cycle, received a CIDR. 7 days later, 200 mg FSH was treated with 40, 30, 20, 10 mg FSH levels in declining doses twice daily by intramuscular injection for 4 days. On the 3$^{rd}$ day administration of FSH, 25 mg $PGF_2{\alpha}$ was administered and CIDR was withdrawn. After FSH injections were complete, donors were artificially inseminated twice at 12 hr intervals. The donor cattle received 250 ${\mu}g$ GnRH at time of 1$^{st}$ insemination and embryos were recovered 8 days after the 1$^{st}$ insemination. Embryo collection from superovulated donors were performed to flushing by DEC and conventional method. As a results, the average number of recovered embryos were significantly higher as 19.1${\pm}$1.40 with DEC method than 12.0${\pm}$0.44 with conventional embryo collection method, respectively (p<0.05). Also, The average number of transferable embryos were significantly higher (p<0.05) as 15.8${\pm}$1.72 with DEC method than 6.9${\pm}$0.35 from conventional embryo recovery procedures. Meanwhile, number of recovered embryos and number of recovered transferable embryos following the number of flushing times until 6${dr}$ flushing were significantly higher as 8.6${\pm}$0.53 and 8.6${\pm}$0.53 from 2$^{nd}$ flushing time than other groups (p<0.05). No. of Ear. B stage embryos were significantly higher as 3.9${\pm}$0.90 and 3.9${\pm}$0.90 with 2$^{nd}$ flushing time in total collected embryos and transferable embryos (p<0.05). Com M stage embryos were significantly higher as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 3$^{rd}$ flushing time for recovered embryos (p<0.05). In transferable embryos, Com. M stage embryos were significantly higher (p<0.05) as 3.7${\pm}$1.00 in 2$^{nd}$ flushing time and as 2.2${\pm}$0.76 in 34$^{dr}$ flushing time, also. No. of degradation embryos was significantly higher as 2.2${\pm}$0.72 in 5${rd}$ flushing time, On the other hand, degradation embryos was not observed in transferable embryos (p<0.05). In conclusion, these results suggest that DEC method should effective methods for production of in vivo embryos using less flushing solution following perform until 4$^{rd}$ flushing time than conventional embryo collecting method. Also, it might be effectively collection of transferable embryos following more less procedure times compared to conventional embryo recovery methods.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.375-388
• /
• 2019

Accurate evaluation of sea-to-air $CO_2$ flux and its variability is crucial information to the understanding of global carbon cycle and the prediction of atmospheric $CO_2$ concentration. $fCO_2$ observations are sparse in space and time in the East Sea. In this study, we derived high resolution time series of surface $fCO_2$ values in the southwest East Sea, by feeding sea surface temperature (SST), salinity (SSS), chlorophyll-a (CHL), and mixed layer depth (MLD) values, from either satellite-observations or numerical model outputs, to three machine learning models. The root mean square error of the best performing model, a Random Forest (RF) model, was $7.1{\mu}atm$. Important parameters in predicting $fCO_2$ in the RF model were SST and SSS along with time information; CHL and MLD were much less important than the other parameters. The net $CO_2$ flux in the southwest East Sea, calculated from the $fCO_2$ predicted by the RF model, was $-0.76{\pm}1.15mol\;m^{-2}yr^{-1}$, close to the lower bound of the previous estimates in the range of $-0.66{\sim}-2.47mol\;m^{-2}yr^{-1}$. The time series of $fCO_2$ predicted by the RF model showed a significant variation even in a short time interval of a week. For accurate evaluation of the $CO_2$ flux in the Ulleung Basin, it is necessary to conduct high resolution in situ observations in spring when $fCO_2$ changes rapidly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• Journal of Korean Academy of Nursing
• /
• v.13 no.1
• /
• pp.42-53
• /
• 1983

The purpose of this study is to help the care of patient and to his family through comparison of the level of anxiety which between the family of admitted patient and the family without in patient, and to his family through comparison of the level of anxiety which between the family of admitted patient and the family without inpatient and exclude the factors which raised the level of anxiety in them. The experimental group in this study were samples of 200 patient's family selected by random sampling in H. University hospital located in Seoul (Department of patient were internal medicine, surgery, pediatrics and neuropsychiatry). The control group were samples of 70 family without inpatient selected by random sampling in Seoul. The data were collected through STAI (State-Trait Anxiety Inventory) by Spielberger (1970) for measurement to level of state and trait anxiety from April 1st to April 15th in 1982. The contents of data analysis by EDPS included the difference of level of anxiety between experimental and control group, correlationship between general characteristics of experimental group and level of anxiety, and correlation of trait and state anxiety in experimental group. The Findings of this study were as follows: 1) Level of anxiety of experimental group is higher than control group. 2) In the correlation between general characteristics and level of anxiety of experimental group, there were no significant difference which revealed in correlation with age of family member, family life cycle, marital status, the relation between patient and family member, the degree of symptom, number of admission, admission or nonadmission of medical insurance, number of family member, and division of disease to level of anxiety However, according to the sex of family member, hospitalization period, a monthly income of family, the degree of confidence toward medical team, religion of family, academic background of family, a tendency of significant differences to level of anxiety were seen. To put them in the concrete, they were as follow; a) Level of. anxiety on female family member is higher than male in experimental group. b) Admission period of patient is positively related to the level of anxiety of patient's family. c) The degree of confidence of patient's family toward medical team is in inverse proportion to the level of anxiety. d) A monthly income of patient's family is in inverse proportion to the level of anxiety. e) Levlt of anxiety of believer in patient's family is lower than unbeliever. f) The academical background of patient's family is in inverse proportion to the level of anxiety g) Level of state anxiety of patient's family at the time of admission is positively related to the level of trait anxiety.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.305-315
• /
• 2020

For geological disposal of radioactive wastes, a method was proposed to evaluate the radionuclide transport in the biosphere by calculating the elapsed time of nuclide migration. The radionuclides were supposed to be introduced from a natural barrier and reached a large surface water body following a groundwater flow in a shallow subsurface. The biosphere was defined as a shallow subsurface environment that included aquifers on a host rock. Using the proposed method, a calculation algorithm was established, and a computer code that implemented the algorithm was developed. The developed code was verified by comparing the simulation results of the simple cases with the results of the analytical solution and a public program, which has been widely used to evaluate the radiation dose using the radionuclide transport near the surface. A case study was constructed using the previous research for radionuclide transport from the hypothetical geological disposal repository. In the case study, the code calculated the mass discharge rate of radionuclide to a stream in the biosphere. Because the previous research only demonstrated the transport of radionuclides from the hypothetical repository to the host rock, the developed code in the present study could help identify the total transport of radionuclide along the complete pathway.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.153-158
• /
• 2011

This study was performed in order to simplify the operation and minimize stress of donor and be readily available in the field with low cost and high quality embryos using the Direct Embryo Collection (DEC). Donors, at random stages of the estrous cycle, received a CIDR. 7 days later, 200 mg FSH was treated with 40, 30, 20, 10 mg FSH levels in declining doses twice daily by intramuscular injection for 4 days. On the 3rd day administration of FSH, 25 mg $PGF_2{\alpha}$ was administered and CIDR was withdrawn. After FSH injections were complete, donors were artificially inseminated twice at 12 hr intervals. The donor cattle received 250 ${\mu}g$ GnRH at time of 1 st insemination and embryos were recovered 8 days after the 1st insemination. Embryo collection from superovulated donors was performed to flushing by non-surgical methods of 3-way, 2-way and DEC (l-way). The average number of recovered embryos were 11.25${\pm}$0.63, 12.5${\pm}$0.65 and 11.75${\pm}$0.48 from operations of 3-way, 2-way and DEC methods, respectively. There were no significant differences among the embryo collection methods. Also, The average number of transferable embryos were 6.25${\pm}$0.48, 7.25${\pm}$0.48 and 7.25${\pm}$0.63 from each embryo collection procedures. The number of transferable embryos was no differences among the 3-way, 2-way and DEC methods, respectively. Meanwhile, the ratio of transferable embryos for all recovered embryos from DEC methods was higher as 61.7 % than 55.6 %, 58 % from methods of 3-way, 2-way. And the flushing solution required for recovering embryos by DEC method was significantly lower as 0.28${\pm}$0.32 1 than 1.8${\pm}$0.12 1, 1.75${\pm}$0.10 1 from 3-way, 2-way methods (p<0.05). Also, the time required for recovering embryos by DEC methods was significantly lower as 27${\pm}$2 min than 51${\pm}$3, 45${\pm}$2 min, respectively (p<0.05). In conclusion, these results suggest that DEC method for embryo collection may be effectively used for production of in vivo embryos using less flushing solution and, it might be effectively available in the field compared to conventional embryo recovery methods using 3-way or 2-way balloon catheter.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.191-198
• /
• 2006

The objectives of this study was to produce valuable offsprings of Hanwoo and Jeju black cattle using in vivo embryo production and embryo transfer techniques during 5 years ($2001{\sim}2005$) in Jeju. Two hundred and eighty six Hanwoo and sixty nine Jeju black cattles, at random stages of the estrous cycle, received a CIDR. Seven days later, the animals were superovulated with a total of 400 mg pFSH ($Folltropin^{(R)}-V$) administered twice daily in constant doses (each 50 mg) over 4 days. On the 6th administration of FSH, CIDR was withdrawn and 25 mg $PGF_{2{\alpha}}$ was administered. Cows were artificially inseminated thrice after estrous detection at 12 hr intervals. The cows received $250{\mu}g$ GnRH at the time of 2nd insemination. Embryos were recovered 7 or 8 days after the 1st insemination. Recipients were synchronized with donors by insertion of a CIDR for 7 days and administration of 25 mg $PGF_{2{\alpha}}$ at the time of CIDR removal. The collected embryos were transferred to 1,219 recipients by 6 transfer persons. The mean numbers of total ova and transferable embryos from Hanwoo and Jeju black cattle donors were 7.4 and 4.7, respectively The number of transferable embryos differed between Hanwoo (5.0) and Jeju black cattle (3.5, p<0.05), while that of total ova did not differ. Repeated superovulation treatments decreased (p<0.05) the ratio of numbers of the flushed animals vs. superovulated animals in Jeju black cattle, and the numbers of total ova and transferable embryos in Hanwoo. More transferable embryos were collected at summer (5.6) than winter (2.9, p<0.01). The mean pregnancy rate was 40%. The pregnancy.ate was affected by transfer year (2001<2004, p<0.05) and transfer person ($33.0{\sim}41.9%$, p<0.01), while not by donor (embryo) breed. These results showed that in vivo embryo preduction and embryo transfer techniques using CIDR for Hanwoo and Jeju black cattle donors as well as recipient, regardless of their estrous cycle, may enable a stable embryo production and recipient preparation.