• Advances in materials Research
• /
• 제1권3호
• /
• pp.191-204
• /
• 2012

In this paper, we report on the obtention of nanocrystalline $SrMoO_4$ synthesized through modified combustion process. These powders were characterized by X-ray diffraction, Fourier Transform Raman and Infrared Spectroscopy. These studies reveal that the scheelite-type $SrMoO_4$ crystallizes in tetragonal structure with I41/${\alpha}$ (N#88) space group. Transmission electron microscopy image shows that the nanocrystalline $SrMoO_4$ powders have average size of 18 nm. The optical band gap determined from the UV-V is absorption spectra for the as prepared sample is 3.7 eV. These powders showed a strong green photoluminescence emission. The samples are sintered at a relatively low temperature of $850^{\circ}C$. The morphology of the sintered pellet is studied with scanning electron microscopy. The dielectric constant and loss factor values obtained at 5 MHz for a well sintered $SrMoO_4$ pellet has been found to be 9.50 and $7.5{\times}10^{-3}$ respectively. Thus nano $SrMoO_4$ is a potential candidate for low temperature co-fired ceramics and luminescent applications.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.157-162
• /
• 2015

SKD11(ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Adding of CNTs increased the performance of mechanical properties more. 1, 3 vol.% CNTs was dispersed in SKD11 matrix by mechanical alloying. SKD11 carbon nanocomposite powder was sintered by spark plasma sintering process. FE-SEM, HR-TEM and Raman analysis were carried out SKD11 carbon nanocomposites.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.414-418
• /
• 1999

Typical metal oxide thin films having optical and electrical properties are widely used as inorganic functional materials. Liquid phase deposition(LPD) method, a new low temperature process, has been developed for the several advantages of no vacuum system, low cost, high throughput, and low processing temperature(<$50^{\circ}C$). Silica powder was added to 40wt% hydrofluoro-silicic acid($H_2$SiF\ulcorner) to obtain an immersing solution of silica-saturated hydrofluorosilicic acid solution. Boric acid solution was continuously added in the range from 0 to 0.05M to prepare supersaturated hydrofluorosilicic acid solution. LPD $SiL_2$film was formed with the variation of added amount of $H_2$O. The SiO$_2$thin film could be prepared from hydrofluorosilicic acid by LPD method. The thickness of LPD $_SiO2$film was influenced by the boric acid concentration and added amount of $H_2$O. Silicon in thin film existed as SiF\ulcorner by Raman spectrum.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.299-306
• /
• 1998

비정질 규소가 결정질로 되기 위해서는 활성화가 필요하다. 이 활성화는 레이저 및 로내에서의 열처리로 열에너지를 가하면 달성될 수 있다. 이때 이 열에너지 외에 기계적 에너지 등을 가하면 활성화에 도움이 될 수 있을 것이다. 본 연구에서는 습식연마와 자기이온주입 등의 방법으로 기계적 손상을 주어서 이것이 LPCVD로 증착된 비정질 규소 박막의 결정화에 미치는 영향을 조사하였다. 결정성 확인을 위해서는 XRD와 라만분석법을 사용하였다. 본 연구의 결과, 기계적 손상이 비정질 규소 박막의 결정화를 증진시키는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.51-56
• /
• 2008

The regioselective ring opening of epoxides using elemental iodine and bromine in the presence of methimazole (MMI, a anti-thyroid drug) and its metabolite methimazole-disulfide as new catalysts are studied. MMI easily converted in vitro to MMI-disulfide without any double activation presented in vivo. FT-Raman and UV spectroscopies are used to study the interaction of iodine with these catalysts. The results indicate that both catalysts are efficient in polyiodide formation, but MMI-disulfide can catalyze this reaction in higher yield and regioselectivity. The complex [(MMI-disulfide)I]+.I3- is considered to be formed initially which could be bulkier by addition of excess of iodine in the course of the reaction. These bulky nucleophiles have a fundamental role in the high regioselectivity by attacking the less sterically hindered epoxide carbon. In this study we suggest that MMI is readily converted to MMI-disulfide by interaction with iodine or activated iodine in thyroid gland, and this process is responsible for high anti-thyroid activity of MMI.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.777-782
• /
• 2013

In order to further reduce the sulfur content in liquid hydrocarbon fuels, a desulfurization process by adsorption for removing dimethyl sulfide (DMS) and propylmercaptan (PM) was investigated. Bentonite adsorbents modified by $CuCl_2$ for the desulfurization of model oil was investigated. The results indicated that the modified bentonite adsorbents were effective for adsorption of DMS and PM. The bentonite adsorbents were characterized by X-ray diffraction (XRD) and thermal analysis (TGA). The acidity was measured by FT-IR spectroscopy. Several factors that influence the desulfurization capability, including loading and calcination temperature, were studied. The maximum sulfur adsorption capacity was obtained at a Cu(II) loading of 15 wt %, and the optimum calcination temperature was $150^{\circ}C$. Spectral shifts of the ${\nu}$(C-S) and ${\nu}$(Cu-S) vibrations of the complex compound obtained by the reaction of $CuCl_2$ and DMS were measured with the Raman spectrum. On the basis of complex adsorption reaction and hybrid orbital theory, the adsorption on modified bentonite occurred via multilayer intermolecular forces and S-M (${\sigma}$) bonds.

• 대한화학회지
• /
• 제57권4호
• /
• pp.447-454
• /
• 2013

In this research, two new complexes of N-(2-aminoethyl)-1,3-propanediamine (aepn), $[Cd(aepn)_2]I_2$ (1) and $[Cd(aepn)_2]Cl_2{\cdots}H_2O$ (2), were prepared and identified by elemental analysis, FT-IR, Raman spectroscopy and single-crystal X-ray diffraction. Geometry around the cadmium atom in two complexes by coordination of six nitrogen atoms of two aepn is distorted octahedral. If distortion in the mer-$[Cd(aepn)_2]^{2+}$ cation is disregarded, it has a $C_2$ axis and $C_2$ symmetry. The cyclic voltammetry experiments were carried out to study the complexation process. Two structural surveys on coordination modes and complexes of aepn are presented. A study was carried out using CSD data to estimate the averages of bond lengths for different types of the Cd-N bonds. It was found that the intermolecular $N-H{\cdots}I$, $C-H{\cdots}I$ hydrogen bonds in 1 and $N-H{\cdots}Cl$, $N-H{\cdots}O$, $C-H{\cdots}O$, $O-H{\cdots}Cl$ in 2 stabilized the crystal networks.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.141-146
• /
• 2011

Successful coating of high quality glassy carbon is introduced by applying high pressure during the curing process of dip-coated phenol resin on graphite. The dependence of the applied pressure on the quality of the glassy carbon layer has not been reported so far. Pressure was changed from 0 to 400 psi during curing at $200^{\circ}C$. After carbonized at $1100^{\circ}C$ in inert atmosphere for the 400 psicured sample, as a promising result, a thick (~ 3 mm) and smooth glassy carbon layer could be obtained without any breakage, and the yield of carbonization was remarkably increased. It is believed that the cross-linking of resins results in decreasing volatile contents and, thus, increasing the yield of the glassy carbon. The origin of the improvement is discussed on the basis of several analytical results including FE-SEM, FT-IT and Raman spectrum.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.166.2-166.2
• /
• 2014

In this work, we demonstrated a facile and effective method for deposition of metal tetraphenylporphyrin (MTPP) thin film by a combined a thermal evaporation (TE) and atomic layer deposition (ALD). For the deposition of Zn-TPP thin film, Tetraphenylporphyrin (TPP) and diethyl zinc (DEZ) were used as organic and inorganic materials, respectively. Optimum conditions for the deposition of Zn-TPP thin film were established systematically: (1) the exposure time of DEZ as inorganic precursor and (2) the substrate temperature were adjusted, respectively. As a result, we verified that the surface reaction between organic semiconductor (TPP) and metal atom (Zn) was ALD process. In addition, we calculated activation energy by using Arrhenius equation for the substrate temperature versus area change rate of pyrrolic nitrogen. The surface and interface reactions between TPP with Zn were investigated by X-ray photoelectron spectroscopy, Raman spectroscopy, UV-vis spectroscopy, and scanning electron microscopy. These results show a facile and well-controllable fabrication technique for the metal-organic thin film for future electronic applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.194-194
• /
• 2011

The effects of argon neutral beam (NB) energy on the amorphous carbon (a-C) films were investigated, while the a-C films were deposited by neutral particle beam assisted sputtering (NBAS) system. The energy of neutral particle beam can be controlled by reflector bias voltage directly as a unique operating parameter in this system. The deposition characteristics of the films investigated of Raman spectra, UV-visible spectroscopy, electrical conductivity, stress measurement system, and ellipsometer indicate the properties of amorphous carbon films can be manipulated by only NB energy (or reflector bias voltage) without changing any other process parameters. We report the effect of reflector bias voltage in the range from 0 to -1KV. By the increase of the reflector bias voltage, the amount of cross-linked sp2 clusters as well as the sp3 bonding in the a-C film coated by the NBAS system can be increased effectively and the composition of carbon thin films can be changed from nano-crystalline graphite phase to amorphous carbon phase.