• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.2
• /
• pp.68-72
• /
• 2006

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11b
• /
• pp.72-73
• /
• 2001

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.17-24
• /
• 2014

The experiment was conducted at the growth chamber to determine germination, seedling growth and fresh weight between the untreated control and iron-coated seeds in germination test of the rice seeds. There was of 95% germination in rice seeds regardless of treatments and days for seedling emergence was relatively 13-14days. Seedling height was 4.9cm of the iron-coated seeds but 0.4cm of the untreated control and there was 6.S roots of seedling in iron-coated seeds and 5.5 roots of seedling in the untreated control, respectively. The fresh weight of seedling was 107mg of the iron-coated seeds and 66mg of the untreated control at 35days after sowing.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.185-196
• /
• 2019

Abstract. This research was conducted to figure out the optimal size of the plug cell and seedling raising period in 'Nongwoo' and 'Nonghyeop' cultivars. In the first experiment on effect of plug cell size on growth of squash, seedlings were transplanted into hydroponic cultivation beds at different growing stages: Those in 32-cell trays with 3-4 true leaves at 25 days after sowing, those in 50-cell trays with 2 true leaves at 15 days after sowing, those in 105-cell trays just before a true leaf development, and those in 162-cell trays with only cotyledons at 8 days after sowing. In the second experiment on effect of seedling raising period on growth of squash, it was conducted to have different sowing dates. But the same transplanting date, based on the results of Experiment 1, and compared the differences in growth and fruit productivity as affected by plug cell size in the same way with experiment 1 including the cultivars and environmental conditions. After setting the transplanting date in advance, the number of days for sowing were calculated back for each treatment. In the first experiment, plant height was the greatest in 105-cell trays followed by 162, 50 and 32-cell trays in both cultivars. The best fruit quality was found in different treatments depending on the cultivars, although it was the lowest in 32-cell trays in both cultivars. The fruit quality was not significantly different among those from cell sizes. Therefore, when raising seedlings in 105-cell trays, the period of raising seedlings can be shortened as compared with the conventional 32-cell trays, and this change could reduce the workforce required for growing and transplanting seedlings. In the second experiment, after transplanting, shoot height and leaf width in the first measurement in both cultivars were greater in the 32-cell treatment. However, the last measurement after four weeks showed no significant difference in plant height, but significantly greatest leaf width in the smallest cell treatment, even as compared with that in 32-cell treatment. In case of 'Nongwoo', length and weight of the first harvested fruit showed the highest values in the treatment of 105-cell trays. In case of 'Nonghyeop' the 162-cell treatment along with the 105-cell treatment showed greatest length and weight of the first fruits. From these results, zucchini plug seedlings can be raised in plug trays with reduced cell sizes than the conventional 32-cell trays with improved fruit productivity.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.12-17
• /
• 2002

Tn establish the criteria for appropriate seedling production method in the summer, the effect of container size and seedling age on the growth and yield were evaluated with tomato. The seedling quality was higher when seedlings were grown polyethylene in 9cm pots than in 72 cell plugs. Seedling quality increased with increase in seedling age in polyethylene pots, whereas seedling age did not affect seedling quality in plug trays. Fruits matured earlier on plants started from pot-grown transplants for a long duration than with plug tray-grown transplants for a shorter duration. Not only total yield in 4 months, but the early yield in the first 2 months, was higher with pot-nursed transplants than with plug tray-nursed transplants. With pot-grown transplants, The early yield in initial 2 months was the lowest in 25 day-old transplants, whereas there was no significant differences between 35- and 45-day-old transplants. Seedling age did not affect the cumulative yield for 3 months after the first harvest. With plug tray-grown transplants, the cumulative yield tar initial 3 months was the highest in plants grown for 35 days in the nursery, followed by 25 day and 45 day. However, there were no significant differences among seedling ages in the total yield.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.82-87
• /
• 2010

To investigate effects of kind of pot for raising of seedling (single plastic pot, double plastic pot, circular peat pot, square peat pot) and planting method of the pot (3/3, 2/3, and 1/3 by the buried degree of pot height) on watermelon (Citrullus lanatus) growth, this research was conducted under plastic film house. Since planting of seedlings, number, area and photosynthesis rate of leaves, plant height and weight were superior in seedling grown in double plastic pot than those grown in the others. In fruit characteristics harvested at 12 weeks after planting, fruit height, diameter and weight were longer in double plastic pot than in the others, also fruit peel thickness and hilum diameter were thicker and shorter. Initial growth of the plant after planting with seedling grown in double plastic pot was superior in method buried the 2/3 degree of the pot height than the other methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.200-204
• /
• 2003

This study was conducted to develop a technology for raising seedlings hydroponically using the bed in which the seedlings grew in nutrient solution without soil. In order to establish the optimum EC value of nutrient solution, six initial EC values (1, 2, 3, 4, 5 dS/m and control) of Yoshida's hydroponic solution were examined. Seedling height and dry weight increased with increasing below EC up to 3.0 dS/m, but showed no significant increase at higher than EC 3.0 dS/m. Nutrient solution with initial EC of 3.0 dS/m was good to be dropped down nearly to 1 dS/m after 15-day seedling culture. But those with initial EC of 4.0 and 5.0 dS/m were judged not appropriate because of high EC value in waste nutrient solution. Utilization efficiency of minerals of nutrient solution and rice endosperm was higher on the whole at initial EC of 2.0-3.0 dS/m. Considering seedling growth and utilization efficiency of supplied nutrient solution, initial EC is judged to be suitable at 3.0 dS/m.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.155-165
• /
• 2012

This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.88-89
• /
• 2005