• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.736-744
• /
• 2009

The abrupt failure of slope caused by a concentrated rainfall would be a disaster in this country. Specially, the soil slope may be collapsed by the rainfall seepage, however, there is not much information for the mechanism of slope failure during rainfall. As analyzing the stability of slope by rainfall, the conventional method is to put the ground-water level on the surface of slope. However, it may provide the over-reinforcement for the slope stability. Futhermore, although over-reinforcement for the slope was fulfilled, the possibility of potential slope failure still exists. In this study, the slope stability by the conventional design method and the causes of unstable slope during rainfall were investigated. To analyze the slope stability by rainfall, the computer program SEEP/W for the analysis of seepage was used. As changing the intensity and duration of rainfall in SEEP/W, the analysis were performed. After completion of analysis, the porewater pressure data from SEEP/W was applied to SLOPE/W. As a results of this analysis, it is not reasonable that the groundwater level is going up to the surface of slope during rainfall. Therefore, the conventional reinforcement for the slope stability is not obvious to satisfy the criterion safety factor during rainfall. The reasonable counterplan is to install drainage hole on the surface of slope in order to prevent erosion and debris flow.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.24-36
• /
• 2003

Many rainfall-runoff model, which is applied discharge calculation for effective water-resource planning and management needs topographic and parameter of basin character. But it is very difficult to apply real a phase. Accordingly in this study filling up these problems. Applying GIS(geographic information system) through environment creating input data or concerning with GIS and rainfall runoff model. We built environment that analyze hydrograph showing discharge variation by time. GIS software for constructing input data is used by ArcView. For analysis of hydrograph in Basin, TOPMODEL applied topographic index. Besides for estimate of appliance to rainfall-runoff model, simple storm event and complex storm event are applied rainfall data which was before.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.305-308
• /
• 2002

This study is that analyzes the flood damages caused by rainfall during typhoon and how inundated area should be affected. Using HEC-HMS for analyzing rainfall-runoff and GIS (Geography Information System) for analyzing inundated area and volume. Each model was applied to Seopyung area for runoff effect analysis. As the result, Damaged area was magnified gradually according to the increase of rainfall and GIS was good for calculating the exact flood damage area at varied time.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.38-38
• /
• 2001

The rainfall estimates give sufficiently accurate information to map areas which have received the minimum rainfall necessary for outbreaks of pests such as locusts, thus cutting down the cost of searching for likely outbreak sites. At the other end of the scale, satellite rainfall estimates can be used to give timely warnings of changes in river levels and the likelihood of floods in large river catchments.(omitted)

• Journal of Korea Water Resources Association
• /
• v.47 no.6
• /
• pp.501-511
• /
• 2014

The effects of initial conditions and input values of the rainfall-runoff model were studied in the applications of a lumped concept model for flood event data extension. For the initial conditions of the rainfall-runoff model, baseflow effects and spatial distributions of saturation points ($R_{sa}$) for the storage function methods (SFM) were analyzed. In addition, researches on the effects of rainfall data conditions as input values for the rainfall-runoff model were performed. The Chungju Dam watershed was selected and divided into 3 catchments including smaller size of 22 sub-catchments. The observed discharge and inflow amounts at Yeongwol 1, Chungju Dam, and Yeongwol 2 water level stations were individually operated as criteria for flood data extension in 30 flood events from 1993 to 2009. Direct and base flow were distinguished from a stream flow. In order to test capability of flood data extension, obtained base flow was applied to the rainfall-runoff model for three water level stations. When base flow was adopted in the model, the Nash-Sutcliffe Efficiency(NSE) was increased. The numbers of over satisfaction for model performance (>0.5) were increased over 10%. Saturation points ($R_{sa}$) which strongly influence the runoff amount when rainfall starts were optimized based on the runoff amount at three water level stations. The sizes of saturation points for three locations were similar which means saturation point size is not depending on the runoff amount. The effects of rainfall information for flood runoff were tested at 2002ev1 and 2008ev1. When increased the amount of rainfall information, the runoff simulations were closer to the simulations with full of rainfall information. However, the size of improvement was not substantial on rainfall-runoff simulations in terms of the size of total amount of rainfall.

• Journal of Korea Water Resources Association
• /
• v.44 no.7
• /
• pp.591-599
• /
• 2011

The rainfall intensity is a very essential factor which must be considered for the estimation of the time of concentration. The rainfall intensity, however, is not fully considered for the estimation of the time of concentration due to the complexity of the equation of rainfall intensity. To increase accuracy of the time of concentration, the rainfall intensity and return period were included in the derivation of the time of concentration equations in this study. The equation of rainfall intensity is Sherman type and the regional coefficients were estimated from the rainfall intensity readings on the probability rainfall maps published by Ministry of Construction and Transportation. For simple calculation of rainfall intensities, the contour maps were drawn that expresses coefficients of the Sherman type equation. By substituting the Sherman type equation of rainfall intensity in the equation of the time of concentration, a relatively simple equation with no repeated calculation has been derived. From the study results, in order to include the influence of the rainfall intensity for the estimation of the time of concentration, it is highly recommended that the Sherman type equation of rainfall intensity be used. When one knows a location in Korea and a return period, he can estimate the coefficients of the rainfall intensity equation and calculate the time of concentration considering the rainfall intensity.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.1 s.39
• /
• pp.39-46
• /
• 2007

Most areas in Kangwon Province are mountainous and vulnerable to landslide due to the rainy season in summer and the localized torrential downpour triggered by abnormal climate. In particular, the rainfall is one of direct reasons for landslide. In accordance with the analysis of the relevance between the landslide areas and the accumulated rainfall for four months, there are severe damages of landslide to the areas having more than 1,100 mm of rainfall during three(3) months. Further, it indicates that the more the accumulated rainfall is the greater the size of landslide. These analyses show that the rainfall causes the possible and potential landslide in the vulnerable areas. And also, it means that there exist strong possibilities of landslide even in the areas of lower vulnerability if the amount of rainfall is above certain standard level. Accordingly, in this study we stored the GIS database on the causes and factors of landslide in the southern parts of Kangwon province and conducted simulations on the change of distribution of vulnerable areas by varying the rainfall conditions and by using the evaluation data of landslide vulnerability. As such a result, we found that the landslide could potentially occur if the amount of rainfall is 200 mm and more.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2008

According to recent frequent local flash flood due to climate change, the very short-term rainfall forecast using remotely sensed rainfall like radar is necessary to establish. This research is to evaluate the feasibility of GIS-based distributed model coupled with radar rainfall, which can express temporal and spatial distribution, for multipurpose dam operation during flood season. $Vflo^{TM}$ model was used as physically based distributed hydrologic model. The study area was Yongdam dam basin ($930\;km^2$) and the 3 storm events of local convective rainfall in August 2005, and the typhoon.Ewiniar.and.Bilis.collected from Jindo radar was adopted for runoff simulation. Distributed rainfall consistent with hydrologic model grid resolution was generated by using K-RainVieux, pre-processor program for radar rainfall. The local bias correction for original radar rainfall shows reasonable results of which the percent error from the gauge observation is less than 2% and the bias value is $0.886{\sim}0.908$. The parameters for the $Vflo^{TM}$ were estimated from basic GIS data such as DEM, land cover and soil map. As a result of the 3 events of multiple peak hydrographs, the bias of total accumulated runoff and peak flow is less than 20%, which can provide a reasonable base for building operational real-time short-term rainfall-runoff forecast system.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.6
• /
• pp.87-97
• /
• 2018

Rainfall depth is an important meteorological information. Generally, high spatial resolution rainfall data such as road-level rainfall data are more beneficial. However, it is expensive to set up sufficient Automatic Weather Systems to get the road-level rainfall data. In this paper, we proposed to use deep learning to recognize rainfall depth from road surveillance videos. To achieve this goal, we collected two new video datasets, and proposed a new deep learning architecture named Temporal and Spatial Segment Networks (TSSN) for rainfall depth recognition. Under TSSN, the experimental results show that the combination of the video frame and the differential frame is a superior solution for the rainfall depth recognition. Also, the proposed TSSN architecture outperforms other architectures implemented in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.605-612
• /
• 2006

In this study(II), The developed rainfall forecast model was applied to the NakDong River Basin for the heavy rainfall on 6th to 16th of August in 2002. The results demonstrated that the rainfall forecasts of 3 hours lead time showed good agreement with observed data. The inundation aspect of simulation depends on actual levee failure in the same basin. Rainfall forecasts were used for flood amount computation in the target watershed. Also the flood amount in the target watershed was used on boundary condition for flood inundation simulation in a protected lowland and a river. The results of simulation are consistent with actuality inundation traces and flood level data of the target watershed. This study provides practical applicability of satellite data in rainfall forecast of extreme events such as heavy rainfall or typhoon. Also this study presented an advanced integrated model of rainfall, runoff, and inundation analysis which can be applicable for flood disaster prevention and mitigation.