• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.97-105
• /
• 1992

The purpose of this study is to provide the cause and countermeasure for track problems in the high speed railways due to the irregularly increasing dynamic wheel loads running over the speed range of 300 km/h. It has long been recognised that the track problems encountered on high speed railways are associated mainly with vertical dynamic loads which are related to the unsprung mass of vehicles and track irregularities. In addition to these parameters for the estimation of the dynamic wheel load variation, however, the dynamic characteristics of track structures are discussed in this paper with reference to mathematical modelling of the tracks and vehicle. From the results of the more detailed analyses, the effects of track stiffness and damping characteristics are considered to be significant for reducing the dynamic wheel loads. To make this point clear and appraise the overall performance of the track components, the theoretical analysis on the dynamic behavior of the tracks and wheel set impact tests on several track structures are performed. The experimental results from different track components are compared with each other. The track stiffness and damping characteristics are also presented quantatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.59-66
• /
• 2002

Long-rails in railways and high-speed railway are subjected to additional stresses resulted from the displacements inconsistence between upper structures, and this phenomenon is more remarkable in continuous bridges than in simple bridges. For the sake of safety, railways have to guarantee trains to stop safely without derailment even in the event of earthquake. The influences of acceleration, braking, and temperature were analyzed by static nonlinear method. But earthquake loads that require dynamic nonlinear analysis are not considered in these methods. Because linear relation between relative displacements of decks and rail stresses is not guaranteed at the nonlinear systems such as long rails on the bridges, it is required compute to rail stresses considering both braking and earthquake load by nonlinear dynamic analysis method. In this study, dynamic analysis method with material non-linearity for rails on continuous bridges according to the Taiwan High Speed Railway(THSR) Design Specification volume 9 was developed. And additional stresses and displacements of long rails for acceleration, braking, and earthquake loads were analyzed by this method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.55-70
• /
• 2018

Recently, as shared transportation services has expanded, integrated mobility services that link personal transportation and public transportation are paid attention. To do this, it is necessary to analyze trip mode chaining behavior. This study analyzed the characteristics of the trip mode chaining behavior using the 2010 travel diary survey in Seoul, and analyzed factors to affect mode choice of trip chaining through the multinomial logit model. The transportation means were classified into passenger cars, city buses, intercity buses, railways, taxis, and others, and 25 trip mode chaining types were identified. Among them, the trip share connected between city bus and railways was the highest. It was also found that the trip mode chaining occurred mainly at commuting and in the morning and afternoon peak. According to the model results, the mode choice of trip chaining is significantly influenced by individual attributes (sex and age), household attributes (car ownership and income), trip attributes (trip purpose, trip time and trip length), and arrival area attributes (number of subway lines and bus lines, ratio of commercial area, land use mix and central region).

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.15-21
• /
• 2007

This paper proposes an improved methodology for estimating traffic accident cost savings in the transport appraisal. Four major problems from the existing framework are identified and their alternatives are suggested. First, casualties in the established approach are classified by just two types of 'killed' and 'injured'. This study supplies the indices of fatality further details. Namely, road victims are regrouped by 'killed', 'seriously injured', 'slightly injured', and 'accident reports'. Those of railways are similarly sorted by 'killed', 'seriously injured', and 'slightly injured'. Second, damage only accidents are not satisfactorily considered in the current arrangement. The accidents should be considered as one of the accident types and the social cost of them should also be evaluated. Third, the unit cost of accidents is given by the total value. The unit cost is consisted of several elements and each loss would be useful for a policy frame. This study breaks down the total figure into four pieces of costs, namely production loss, medical treatment, property loss, and administrative costs. Finally, there is inconsistency in the audit between roads and railways. Road accidents are analyzed by road types. On the other hand, patronage or others is the classification rule of rail accident costs. This paper suggests a way that the accident costs of two modes can be coherently estimated based on the level of services by each mode. The result of this study is expected to help frame more cautious social overhead capital investment policies.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2020

In 2005, Urban railway seismic design was introduced in Rep. Of Korea, and many studies on seismic performance evaluation and reinforcement methods were conducted. In accordance with the Enforcement Decree of the Earthquake Disaster Countermeasures Act issued in March 2009, during April 2010 to October 2013, some of local governments established detailed evaluation and reinforcement measures for seismic performance of the urban railway underground structure. Afterwards, the seismic performance reinforcement of the existing urban railway structures was conducted for the sections that a long period of used until the end of 2018, and the reinforcement works are carried out by various methods using the previously studied methods. However, various reinforcing materials and construction methods using have been studied, but the classification research on the construction methods currently applied to reinforcement construction of urban railways is insufficient. The purpose of study is to analysis the cases currently applied to seismic reinforcement construction and to show the characteristics of each construction method, the reasons for its application and problems.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.466-472
• /
• 2013

The use of a concrete track is gradually growing in urban and high-speed railways in many part of the world. The resilient pad, which is essentially when concrete tracks are used, plays the important role of relieving the impact caused by train loads. The simple fatigue test[1] to estimate the variable stiffness of resilient pads is usually performed, but it differs depending on the practical conditions of different railways. In this study, the static stiffness levels of used resilient pads according to passing tonnages levels were measured in laboratory tests. Also, the simple fatigue test and the multi-stress accelerated degradation test for new resilient pads were performed in a laboratory. The static stiffness of the used pad was compared with the results of tests of usage times and cycles. The results of the comparison showed that the variable static stiffness levels of the used pad were similar to results of the multi-stress accelerated degradation test considering the fatigue and heat load. With a T-NT equation related to the degree of the multi-stress accelerated degradation, a model of multi-stress accelerated degradation for a resilient pad was devised. It was found through this effort that the total acceleration factor was approximately 2.62. Finally, this study proposes an equation for a multi-stress accelerated degradation model for polyurethane resilient pads.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.455-464
• /
• 2008

This paper examines the situation and tasks of competitive systems of EU transport market focusing on railways. Recently, the EU transport market has changed radically, thanks to an increasingly competitive rail market. The European Commission has stimulated the creation of a competitive environment that will enhance the position of rail. Some scholars have insisted that the rail market is more monopolistic than competitive. However, the case of UK rail privatization suggests this is not the case. Moreover, some countries have a rail market that is more competitive. We draw on a wide range of sources including statistics and analyses of recent phenomena. These demonstrate the emergence of competitive markets in EU rail and the difficulty of developing a competitive market. With regard to the adoption of the competitive market, we examine three things. First, we observe recent cases and trends in competitive markets. Second, we compare the result of competitive markets and non-competitive markets within EU nations. Third, we demonstrate factors of formation of competitive markets and the possible expansion. We identified differences within open market policies amongst EU nations. Although a competitive EU rail market may have some difficulties, it will steadily begin to overcome technological differences and a lack of funds, because EU countries have a common goal, which is to develop the railways, solving, wherever possible both environmental and energy problems. Through this analysis, we found that the free market in EU rail will be extended to deliver efficiency and quality service.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.423-431
• /
• 2017

This study analyzed the educational background, career, and post-retirement activities of notable bureaucrats employed at Chosun Railway Bureau during the Japanese colonial period in Korea. First, significantly, most railway bureaucrats were of Japanese origin, being specialized in railway operations and adjusted to occupation in a reserved organizational environment for a considerable time period. Second, the Japanese showed explicit eagerness to work at the Chosun Railway, which fitted their ideology of railway bureaucrats. In addition, almost 60% of the bureaucrat population had strong educational experience from Tokyo Imperial University, which is equal to the percentage of graduates from other institutions operating during the Japanese colonial period. Moreover, in the very early period of building the railway system, the demand for specialists was higher than for other jobs and divisions because of the railroad's complex infrastructure, which resulted in high job appointment rates. In a similar sense, based on a strong affiliation of bureaucrats with railways, the number of bureaucrats from Japanese Railway Worker's Bureau was higher initially because of bureaucrats from South Manchurian Railway Company. These changes essentially contributed to alteration of bureaucrats' awareness and created a more positive attitude regarding the Chosun Railway. In the meantime, as opposed to the Taiwan and Manchurian Railways, both Chosun Railway and the Taiwan Railway were operated in compliance with strong bureaucratic traditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.991-999
• /
• 2018

In urban areas, the proportion of railway traffic in public transport is increasing. The congestion situation is repeated as the passengers concentrate on station and transfer facilities and the inconvenience of the passengers is increasing in terms of safety and convenience. Therefore, the importance of estimating the appropriate area of the station has been emphasized. The area estimation formula used in the metropolitan railway stations currently is a partial modification of the area estimation formula of Japan in the 1970s. It does not reflect changes in the social and cultural environment and patterns of passengers. The technical basis for major decision variables is insufficient. Therefore, the theoretical basis of the area estimation formula and the pedestrian environment satisfaction of the design guideline of metropolitan railway stations were analyzed in order to suggest improvement formula. The improved area estimation formula was verified by conducting field surveys on 5 stations of metropolitan railways and 15 stations of urban railways. The existing area estimation formula is LOS E grade for the main space. However, the LOS D grade is implemented when the improved area estimation formula is applied. Based on the results, the design factors for the area estimation formula are suggested.