• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.31-36
• /
• 2020

LTE-R 시스템은 All IP 기반의 서비스를 제공하는 Packet 망으로 구성되는 시스템으로, 승강장안전문과 관련된 지속적인 장애 발생과 이에 따른 승객 및 안전문작업자 관련 안전사고는 계속 발생하고 있으며, 이러한 승강장안전문의 장애 발생에 따른 2차 피해와 이와 관련된 인명피해는 사회적으로 큰 이슈로 떠오르고 있다. 현재 운용 중이거나 설지 중인 LTE기반 철도 무선망인 LTE-R(Long Term Evoluton-Railway) 망에 비콘 시스템을 연동하여 정교하게 열차의 위치를 파악하고, 이를 통하여 표준화된 관련 장애 경보를 열차 승무원에게 제공함으로써 장애 발생 역사에 진입 시 열차의 감속 운행을 실시하고 궁극적으로 안전운행 확보를 통해 도시철도교통 사상사고 감소를 도모한다.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.473-477
• /
• 2013

The railway developed countries in Europe, Japan such as ERTMS Regional, FFB, COMBAT, it is the stage of development or testing the train control system for the signal system of branch interval of low density. Similar to the signal system used by the mainline and branch sections of low density domestic portions not suitable in terms of maintenance operational efficiency in accordance with the installation and operation in many cases. Therefore these low-density branch railway lines required that oriented train control system of wireless communication to improve the operation efficiency and line side equipment controlled on board the train. In this paper, We was published a route on setting is the operation of the new on-board oriented train control system for controlling a line converter of the train so that it is possible to improve the operational efficiency of the branch of the low density.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1930-1935
• /
• 2008

Bimodal tram is able to run both general and special road. It has also the advantages of both public bus and subway which have the charateristics of easiness to approach and punctuality respectively. These advantages are accomplished by the cooperative communication between the control center and bimodal tram which is running with the fleet. This paper have investigated the requirement analysis and designing of the car operating computer system which have the functions of communication, broadcasting and display. car operating computer system communicates between bimodal tram and control center with wireless antenna. It can also transmit the location and status information of bimodal tram to control center for managing the bimodal tram fleet on road efficiently and economically.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.68-70
• /
• 2013

무선통신기반 열차제어시스템은 전용 주파수대역을 사용하여 운용되는데, 고정된 경로 이외의 지역에서는 해당 주파수 대역의 사용이 이루어지지 않고 있어 효율성에 있어 문제점이 제기된다. 본 논문은 철도전용 주파수대역을 타 지역에서 일반 이동통신용으로 사용할 수 있도록 단말기가 양 통신망 사이를 유기적으로 넘나들 수 있게 하는 망 접속관리기법을 제안한다.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.653-660
• /
• 2022

Gravel scattering that is generated during operation of high-speed railway vehicle is cause to damage of vehicle such as windows, axle protector and so on. Especially, those are frequently occurred in winter season when snow ice is generated easily. Above all, damage of vehicle windows has not only caused maintenance cost but also increased psychological anxiety of passengers. Various methods such as heating system using copper wire, heating jacket and heating air are applied to remove snow ice generated on the under-body of vehicle. However, the methods require much run-time and man power which can be low effectiveness of work. Therefore, this paper shows that large-area heating system was developed based on heating coat in order to fundamentally prevent snow ice damage on high-speed railway vehicle in the winter season. This system gives users high convenience because that can remotely control the heating system using IoT-based wireless communication. For evaluating the applicability to railroad sites, a field test on an actual high-speed railroad operation was conducted by applying these techniques to the brake cylinder of a high-speed railroad vehicle. From the results, it evaluated how input voltage and electric power per unit area of the heating specimen influences exothermic performance to draw the permit power condition for icing. In the future, if the system developed in the study is applied at the railroad site, it may be used as a technique for preventing all types of damages occurring due to snow ice in winter.

• 전자공학회논문지
• /
• 제53권4호
• /
• pp.12-19
• /
• 2016

고속 열차에 무선 센서 네트워크를 구성하여 센서 데이터를 이용한 모니터링 시스템에 대한 연구들이 진행됨에 따라, 열차 외부와 내부 간의 통신 시에 발생하는 철도 무선 채널 특성에 대한 연구가 요구된다. 특히, 무선 채널에 다중경로 지연특성이 있는 경우 심볼간 간섭에 따른 성능 열화를 막기 위한 등화기 및 채널 추정기가 요구될 수 있다. 따라서, 본 논문에서는 실제 고속열차에서 IEEE 802.15.4 규격으로 구성되는 ZigBee 송수신기를 이용하여 수신신호를 측정하고, 측정된 수신신호를 분석하여 다중경로가 최대 두 개인 다중경로 지연특성을 확인하였다. 그리고, 확인 된 철도 환경에서 다중경로 지연특성을 고려하여, IEEE 802.15.4 데이터 칩 시퀀스 특성을 이용한 저복잡도의 채널 추정 기법을 제안하고, 제안 기법에 대한 복잡도 및 성능 오차 분석 후 적용 가능성을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.391-396
• /
• 2003

For efficient maintenance on urban transit infrastructure, computerized system using wireless communication system which allows to inquire necessary data and to record maintenance work on the spot in realtime is required. Also, for efficient maintenance progress on urban transit infrastructure which have geographic data, computerized system united with geographic information system that offers visual information is required. In this paper, investigations on new IT technology and on computerized system of foreign country are conducted. And development direction and model of computerized system for maintenance on urban transit infrastructure are proposed.

• 한국정보통신학회논문지
• /
• 제13권6호
• /
• pp.1083-1090
• /
• 2009

차지상간 통합데이터전송 시스템에서 사용하는 18GHz는 다중경도페이딩의 영향이 크고, 회절이 되지 않아 전파의 도달 범위가 송신각과 수신각에 따라 크게 영향 받는다. 본 논문은 차지상간통합데이터전송 시스템에서 지하구간의 전파 특성과 지상 구간의 전파 특성을 비교하였다. 18GHz 차지상통합데이터전송 시스템에 주로 사용되는 지향성 무선안테나인 이득이 15dBi 와 10dBi인 안테나를 사용했을 경우를 가정하여 반경이 100, 200, 400인 선로에 대하여 표준적인 특성을 지상선로구간과 지하터널구간으로 나누어 비교하였다. 이때 송수신 특성은 한국철도기술연구원의 차지상간통합전송의 OFDM모뎀방식의 샘플시료의 송신 출력은 20dBm, 수신감도는 -90dBm을 사용하여 시뮬레이션하였다.

• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.231-240
• /
• 2015

To facilitate the base station planning in high speed railway communication systems, it is necessary to consider the functional relationships between the base station transmit power and space parameters such as train velocity and cell radius. Since these functions are able to present some inherent system properties determined by its spatial topology, they will be referred to as the power-space functions in this paper. In light of the fact that the line-of-sight path persists the most power of the received signal of each passing train, this paper considers the average transmission rate and bounds on power-space functions based on the additive white Gaussian noise channel (AWGN) model. As shown by Monte Carlo simulations, using AWGN channel instead of Rician channel introduces very small approximation errors, but a tractable mathematical framework and insightful results. Particularly, lower bounds and upper bounds on the average transmission rate, as well as transmit power as functions of train velocity and cell radius are presented in this paper. It is also proved that to maintain a fixed amount of service or a fixed average transmission rate, the transmit power of a base station needs to be increased exponentially, if the train velocity or cell radius is increased, respectively.