• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1541-1550
• /
• 2007

A subway is one of many public transportation means that contributes toward our society including seoul and offering of its service and expression of various information are in need due to users high demand. And there are various class of users. For that reason an optical communication network in the general contorl center and station buildings was installed. Considering the importance of safe operation of subway, optical communication exists to enhance customer satisfaction. Safe operation is essential as its level of reliance accounts for about 95%. this paper will look for ways to promote mutual information interchange and operation know-how with systems of the same kind and sharing a capable of effective operation of systems in place. Optical communication network in the metropolis railroad accepts various kinds of control networks and data networks for train operation. As occasion demands, this paper presents effective application scheme and specialized organization about an optical communication operating system.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.623-628
• /
• 2007

Metro Subway System is widely known as the leader of public transportation in a metropolitan area. The signal interlocking is one of the most important organs that plays a major role in the system. By improving the quality of signal interlocking on of the traffic system and keeping its maintenance on a high level will not only repair the current state, but it will also let the PLC(Programmable Logic Controller). The Non-Vital relay of No. 3, 4 Line are the most one of the unstable system, device, which underwent a process of fine manufacture establishment and a close examination, obtained as a new device. Utilizing the equipment with cautious preservation on the system will enhance the current state of the signal device. Especially, the test for improvement and development based upon the technique that decreases the frequency of defect produced will further precipitate its efficiency. With authorization of imposing the newly made equipment will bring improvement to the signal technology and to the industry at largest extent.

• Korean Security Journal
• /
• no.14
• /
• pp.109-123
• /
• 2007

Traffic terror is one of the terror types subject on transportation means. However, unlike the aircraft or ship, there is no case of negotiating with passengers as hostage but to unconditionally attack that the human casualty would be much greater. In act, the terror on subway or bus would have much bigger damage than the terror on aircraft or ship. Because of such fact, there is a need for full preparation thereto, however, there is no preparation of advance preventive measure, particularly, when comparing to the cases involving aircraft. In addition, the passengers who use railway and others in the position of citizens do not have any defense mechanism against any terror activity to make the problem even more serious. Therefore, in order to prevent traffic terror, the first thing is to implement the identity confirmation of passengers, followed by the through search of cargos of the passengers, supplement the capability against the terror by the security team members, strengthen the responsive capability of citizens, thorough check on facilities, expansion of social security network and others. All terrors are within the reach of our neighborhood at the time when we neglect it, and the most secured and safe way to prevent the terror is to check and prepare at all times beginning from our familiar facilities or means.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.164-170
• /
• 2016

The initial urban railway was only required to perform its role as means of transportation. As the time of staying in an underground platform was extended, it has been faced with the issues of environmental improvement as a living space. Therefore, the sliding automatic door, which is the basis of the screen door, is used widely for large distribution stores, hospitals, restaurants, and public offices for customers' convenience and as a convenient method to control access. Therefore, screen doors are required for the purpose of customers' convenience, securing safety, establishing pleasant station buildings, and energy savings. It would be also necessary to develop the optimal design technology for a screen door system through the design of element parts and to ensure reliability. Therefore, this paper calculated, interpreted, and verified the theoretical weight of the composition parts to verify the design drive hardness of the motor for screen doors necessary for the safety of subways.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.1-7
• /
• 2016

Although the second driving device of KTX, which consists of the wheel and the axle reduction gears unit, is a mechanically integrated structure, its preventive maintenance (PM) requires two separate intervals due to the different technical requirements. In particular, these subsystems perform attaching and detaching work simultaneously according to the maintenance directive. Therefore, to reduce the unnecessary amount of PM and high logistic availability of the train, it is important to optimize PM with regard to reliability-centered maintenance toward a cost-effective solution. In this study, fault tree analysis and reliability of the subsystems, considering the criticality of the components, were performed using the data derived from field data in maintenance. The cost optimization of the PM was derived from a genetic algorithm considering the target reliability and improvement factor. The cost optimization was derived from a maximum of the fitness function of the individual in generation. The optimal TBO of them using the genetic algorithm was 2.85x106 km, which is reduced to approximately 21% compared to the conventional method.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2316-2324
• /
• 2008

In this paper, I illustrate the some examples of socio-economic influence of railroad in Korea. The Korean railroad has been running for 109 years now since it started operation in 1899. The opening of railroad in Korea has been affecting influence in our society not only transportation but also infrastructure building and the formation of new cities which they were built along the rail network like Daejeon. I have come up with some examples, which railroad has affected the in our society. For example, the changes of transport route from road to railroad, emerging the new cities, industries and culture. This paper contributes to look over the various function of railroad in Korea. Moreover it will be compared with Japan's railroad influence in his country. It gives us a peculiarity and universality in railroad's function including colonial policy

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4149-4155
• /
• 2013

High speed machining for higher cutting speed and feedrate lead to a increase of surface quality and material removal rate. This paper presents a study of the influence of cutting conditions on the vibration characteristics obtained by machining with face milling cutter for high speed machining. In this paper, Taguchi experimental design method which is based on orthogonal array table was applied to study vibration characteristics with high speed face milling cutter. The experimental conditions used orthogonal array of $L_{27}(3^{13})$. In this work, design and analysis of experiments is conducted to study the effects of these parameters on the vibration by using the S/N ratio, analysis of variance. Four cutting parameters namely, feed rate, champer length, cutting speed, and depth of cut were optimized with consideration of vibration characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.411-417
• /
• 2013

The moment responses of electric pole foundations for a railroad were investigated using real-scale load tests. Large overturning moments were applied to two square rigid piles with a 1.1 m width and a 2.2 m embedded depth. Two different installation methods-with and without a form-were applied to evaluate the influence of the form work on the moment capacities of the foundations. The reduction of ground strength caused by the excavation without a form is more pronounce than the decrease of frictional strength due to the smooth concrete surface with a form. From the test results, it is found that the current design method which applies a proportional coefficient to consider the effect of a form work is not appropriate. When the normal and frictional stressed is considered separately, the effect of a form work can be estimated reasonably by reducing the friction angle between soil and foundation by 20%.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.644-650
• /
• 2016

Track maintenance works based on track geometry recordings are essential to enhance the safety and comfort of railway transportation. Usually, the track irregularity has been measured by a special inspection trains which all were imported from abroad. Because the inspection train speed is limited under 160 km/h, it takes a long time to inspect railways and there is difficulty in daytime operation. To solve this problem, we started to develop a track geometry measuring system (TGMS) with measurement speed up to 300 km/h which can be installed in commercial vehicles such as HEMU-430X. In this paper, we introduce a newly developed inertial TGMS and propose two inertial navigation system (INS) algorithms (method A, B) for measuring track geometry. In order to investigate advantage and disadvantage of each algorithm, we performed vibration test of the TGMS, which was simulated by 6-axis shaking table. Through the vibration test, we analyzed the influence of vehicle vibration on the TGMS which will be installed on bogie frame. To the vibration test, two methods satisfied the required accuracy of track geometry measurement under the level of the actual vehicle vibration of HEMU-430X train. Theoretically, method A is sensitive to vehicle vibration than method B. However, HEMU-430X's bogie vibration frequency range is out of interest range of measurement system. Therefore, method A can also apply the HEMU-430X train.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.441-445
• /
• 2008

LRT is eco-friendly transportation system and can be constructed at less than half cost of subway. Therefore many local governments have planned to construct a various type of LRT and some of them were already under construction. In Para. 2 of Art. 22 of the "Enforcement Decree of Urban Railroad Act" - safety standard of urban railroad vehicle, It can't be operated if "structures and devices" don't come up to standard required to safety operation. Constructor or operator should give an order or operate according to safety standard in Art. 3 of the Safety Standard of Urban Railroad Vehicle. Safety Standard of Urban Railroad Vehicle of 2000 was reformed once to tighten fire safety standard in 2004 after subway accident in Daegue. It was entirely made for medium and large-sized electric motor car. LRT, based on driverless operation and articulated bogie, has different safety standard in signalling devices and the axle load. etc. So many institutes related LRT have required to amend. In this paper, we described features of LRT vehicle and necessity of amendment and discussed how it should be amended.