• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1243-1250
• /
• 2008

LRT System Application Project is performed for the purpose of technical advancement and stabilization of K-AGT system from the viewpoint of practical use and commercialization. For those purpose, the performance test and evaluation procedure for signaling system are developed, and the scheme of verifying the performance and function of signaling system under multi-train and driverless control environment is being conducted. In general, the railway have kept their systems highly safe and reliable through the ongoing efforts over a period of many years. This has been achieved primarily by continuous improvements, which mean that there is a dearth of experience in the introduction of innovative new systems. Therefore it is said that comparing a new system that features a completely new architecture with a conventional one may be difficult. In this paper, we investigate the evaluation method for Radio based-Communication Based Train Control system from case study.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.512-515
• /
• 2019

Overhead contact systems (OCS) consist of contact and messenger wires, in which the contact wire supplies electric energy to the railway vehicle by contacting a pantograph. However, this mechanical contact is interrupted during frosts or temperatures below $0^{\circ}C$ in the winter. In these conditions, railway vehicle accidents can occur during operation because of the low energy efficiency that results from the increase in the arcing between the contact wire and pantograph. Therefore, the detection of frost or freezing temperatures is necessary to maintain the stable operation of these trains. In this study, we proposed the development of a frost or freezing condition monitoring system on the OCSs that utilizes wireless communication.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1257-1263
• /
• 2008

Recent advances in embedded system technology have brought more dependence on automating train control. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed a software testing tool to evaluate train control system software safety, expecially "Metric Analysis" module. We have reviewed requirements in the international standards and surveyed available tools in the market. From this, we identified the S/W metric analysis module is required for software evaluation. So we have developed S/W metric analysis module for railway signaling systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.387-389
• /
• 2001

The railway signaling systems are computerized vital equipments for safety guarantee of train running. And also it is important to prepare the reliable communication link between signalling equipments. In this paper the review of network technology for railway signalling is presented and reliable network technology for network is represented. And also the direction for our further study on these is discussed.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.60-64
• /
• 2004

Harmonic current originating from electric locomotives can be magnified due to the impedance characteristics of power supply circuit and bring about various problems. That is, electromagnetic interference with communication lines, operational trouble in signaling, overheat and/or vibration in power capacitor, mis-operation in protection relay and so on. Therefore, the exact assessment of the harmonic current flow must be undertaken at design and planning stage for the electric traction systems. for these reasons, this study propose a new approach to model and to analyse traction power feeding system focused on system response to current and voltage harmonic(PART I). Measurements of harmonics are also performed for railway power supply systems under normal operation. Spectrum and distortion analyses in measurement data are variously described in PART II.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1011-1017
• /
• 2009

남북철도 연계를 위해서는 남한과 북한 공히 균형 있는 철도시스템을 구축하여 효율적인 한반도철도망을 구성하는 것이 중요하다. 하지만 남한과 북한이 서로 다른 건설기준을 가지고 있어 남북철도 현대화의 걸림돌로 작용하고 있다. 이를 해결하기 위해서는 남북한 철도건설기준에 대한 상호비교가 필요하다. 본 연구에서는 남북한 철도건설기술 관련 법령을 조사하였고, 특히 남북한의 상이한 철도시스템, 특히 철도시설분야 즉, 궤도, 철도구조물, 전력, 신호분야를 중심으로 한 남북한 철도시스템의 비교분석을 수행하였다. 본 연구결과는 향후 북한 철도의 기존선 개량 및 신선 건설에 활용될 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.396-405
• /
• 2009

열차제어 지상신호시스템에서 핵심적인 철도보안기능을 수행하는 연동장치는 철도산업의 안전성 확보 지침에 따라 높은 안전성과 신뢰성을 갖추어야만 한다. 따라서 연동장치는 높은 안전성과 신뢰성을 달성할 수 있도록 실시간 운영체제 및 그 구성 하드웨어의 랜덤 고장에 대처하기 위한 Fail-Safe형 다중 제어시스템으로 구성된다. 이러한 구성에서는 운영자 인터페이스를 포함한 다양한 장치와의 메시지 교환을 위한 인터페이스 가능을 구현하기 어려운 특성이 존재한다. 본 논문에서는 연동장치와 상위 인터페이스 설비간의 통신기능을 구현하기 위한 Dual Ethernet 네트워크 구성 및 DPST (Dual Packet Seamless Transfer) 통신 프로토콜을 제안한다. 제안된 시스템의 구성에서는 특정 네트워크 장비의 랜덤 고장이나 통신오류에 강인한 특성을 보이며 통신채널의 장애를 검출할 수 있는 기능이 추가되어 설비의 유지보수에 효과적인 정보로 활용될 수 있음을 실험적으로 검증한다. 제안된 네트워크 구성 및 운영 프로토콜을 현대제철 전용철도용 전자연동장치에 구현하고 그 성능과 특성을 유럽표준규격 EN50159의 지침을 토대로 타당성을 분석한다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권1호
• /
• pp.29-35
• /
• 2004

Locomotive scheduling in railway systems experiences many difficulties because of the complex interrelations among resources, knowledge and various constraints. Artificial intelligence technology has been applied to solve these scheduling problems. These technologies have proved to be efficient in representing knowledge and rules for complex scheduling problems. In this paper, we have applied the CSP (Constraints Satisfaction Problems) programming technique, one of the AI techniques, to solve the problems associated with locomotive scheduling. This method is more effective at solving complex scheduling problems than available mathematical programming techniques. The advanced locomotive scheduling system using the CSP programming technique is realized based on the actual timetable of the Saemaul type train on the Kyong-bu line. In this paper, an overview of the CSP programming technique is described, the modeling of domain and constraints is represented and the experimental results are compared with the real-world existing schedule. It is verified that the scheduling results by CSP programming are superior to existing scheduling performed by human experts. The executing time for locomotive scheduling is remarkably reduced to within several decade seconds, something requiring several days in the case of locomotive scheduling by human experts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2004

This on-board signaling system has been designed with a priority on safety. The system has been devised for both safety, and also the efficiency of train operation. The Importance of signaling system is gradually being recognized with the continuous rise of operating speed and transporting density. Until now, the adaptation of signaling system was totally dependent on foreign signaling companies, as it was difficult to be accessed by domestic technology. But, successful commercial operation of the ATC/ATO system, which is adopted in the development of Kwangju Line No.1, heralds the use of domestic technology, which will be the basis of all future domestic signaling systems.

• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.20-30
• /
• 2017

철도통신기능은 안전한 열차 운행을 위한 운영자간의 통신 기능과 열차제어를 위한 데이터 전송 기능으로 분류된다. 관련 기술은 2004년 영업 운전을 시작한 유럽의 GSM-R이 가장 대표적인 철도통신 기술로 주어진다. 국내의 경우, 국가재난망에서 임대한 TRS가 철도 운영자간의 통신 기능으로 사용되고 있지만, 열차제어용 데이터 통신은 적용되지 못하고 있는 실정이다. 그러나 2014년 국내의 LTE 기술을 이용한 LTE-R의 개발이 세계 최초로 철도에 적용하여 성능 검증 및 국내 표준 제정에 성공하였다. 이를 응용한 LTE 기반의 국가재난안전망(PS-LTE)도 2016년 시범구축사업이 강원도에서 성공적으로 완료되었다. 본 논문은 철도통신의 핵심인 LTE-R의 통신기능과 데이터 전송 기능을 PS-LTE와 GSM-R의 기능과 비교, 검토하였다. 검토 결과는 LTE-R의 데이터 전송 기능이 GSM-R의 기능보다 우수함은 물론 철도통신기술은 PS-LTE의 요구 기능도 대부분 만족함을 시험을 통해 입증하였다.