• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1493-1500
• /
• 2015

For efficient and economical train operation in low-density railway line, on-board oriented train control system, which reduces expensive wayside equipment, is being developed. In this paper, we discuss a tram signal priority strategy which enables efficient and safe train operation when the developing system is applied to train-tram railway environment. Based on the well-known transit signal priority strategies, we develop a tram signal priority algorithm and conduct simulations by using model-based systems engineering (MBSE) tool. Various considerations such as operation procedure, linkage to existing road traffic system, applicability with respect to crossroad types, and so on, are also dealt with.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.327-332
• /
• 2001

This paper proposes the system to describe the data transmission methods using the simply frequency transmission methods between a railway track and the train. This system can control the railway signals through the ABS or ATS system located in the train and stations, having the frequency about 433.92 MHz. It shows the advanced system to send a lot of data through the microprocessor installed in a transmitter and transmitter-receiver at the train and railway.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.154-160
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic Train Operation), ATC(Automatic Train Control), and TWC(Train to Wayside Communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.202-209
• /
• 1998

This paper presents a modelling of railway facilities and signalling system based on object-oriented software development technique to simulate multi-train movements on the complex railway network. Block and interlocking functions of signalling system is modelled using Node-Link model of railway network and signal control logic, which can be used to set the train routes and control the train movement. A brief explanation of class design about these model is provided.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.375-384
• /
• 2021

The development of the European Railway Traffic Management System (ERTMS) began in 1989 as part of the European Union policy to establish a unified and interoperable railway route in Europe. It is a trend that ERTMS/ETCS(European Train Control System) is becoming an international standard in the railway signaling system. As the solution to this situation, the domestic railway signaling field is also at a time when it is more necessary to develop the technology of the train control system considering interoperability. The European Railway Agency (ERA) has proposed B3R2 (Baseline 3 Release 2) for new ETCS-equipped trains after 2020.12.31. In Korea, Baseline 2.2.0 to 2.3.0d on Gyeongbu Line, Honam Line, Jeolla Line, and Gyeongchun Line was installed and now is under operating. As the Baseline upgrade continues, technical considerations and economic considerations are an occurring trend. In this paper, we analyzed the main functions and compatibility of the currently distributed European standard ERTMS/ETCS Baseline 3 and presented a plan to apply the domestic KTCS(Korean Train Control System) Baseline in the near future.

• Journal of the Korean Society for Railway
• /
• v.1 no.1 s.1
• /
• pp.10-19
• /
• 1998

Described in this paper is the software to design of a railway interlocking table, which describes the functional specifications of an interlocking device. Interlocking tables has been designed mainly based on personal expertise among signal engineers. However, this expertise needs to be analyzed with technical uniformity and integrated in an organized system. The proposed software is amount to the signal engineer's expertise, yet a generalization of interlocking reasoning. The algorithm is based on the train route setting principle, and is applicable in solving practical problems by computers. The software was evaluated through man-made and machine-made interlocking tables are compared. The evaluation results proves the software to be effective for computer control of the signaling system as interlocking system with a much improved safety.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.442-446
• /
• 2009

As the railway transportation is getting faster and its operation speed has increased rapidly, its signal control has been complicated. For real time signal processing it is very important to prohibit any critical error from causing the system to malfunction. Today, most of the railroad's controling communications between wayside and train are made in one way. Therefore, by using a forward error correction technique, which receiver can actively correct the signal error, we can increase the performance and the stability of the railroad signaling system. In this paper, we introduce low density parity check(LDPC) that is used by next generation wireless communications and DMB technique. We verified that we can achieve low bit error rate(BER) in high signal to noise ratio(SNR) by using LDPC.

• International Journal of Railway
• /
• v.4 no.4
• /
• pp.93-96
• /
• 2011

The basic element of the EMS suspension is the electromagnet system, which suspends the vehicle without contact by attracting forces to the rails at the guideway. The suspension of a vehicle by attractive magnetic forces is inherently unstable and consequently it is continuously adjusted by the strength of the suspending electromagnet from rail irregularity and bending of the guideway. In order to improve reliable tracking, it needs to get feedback signals without measurement delay time. In this paper the concept of feedback control system with Kalman Filter in EMS is proposed. The input signals in the feedback control system are an air-gap and an acceleration signal. The air-gap signal with noise from the gap sensor is transformed to the filtered air-gap signal y without measurement delay time by using Kalman Filter. The filtered air-gap signal is transformed to a relative velocity and a relative acceleration signal. Then it multiplies these values by gain matrix in order to get the actuator's reference voltage value. The simulation results show that the dynamic responses of the suspension system can be improved by reducing the influence of measurement delay time of air-gap signals.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1108-1114
• /
• 2011

In general, railway system uses wheels so detecting speed by tachometer. However, LRT(Light Rail Transits) stands out recently as alternatives transportation, and besides of that Maglev trains are emerged as an alternative means of transportation. Maglev operates above certain heights caused inability of the measurement by tachometer which used to detect speed of wheels. Velocity Detection Signal Device of Train Control System applied in "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train" which is prepared ahead of opening in 2013. This paper, therefore, explains the function and operation principal of Velocity Detection Signal Device, and suggests installation method of velocity detection loop installed around the track.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.172-179
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design iかd testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control md Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.