• 한국전자통신학회논문지
• /
• 제9권4호
• /
• pp.537-542
• /
• 2014

철도신호시스템에서 열차위치 검지기능은 선로의 레일을 전기회로의 일부분으로 사용하여 차륜에 의해 단락되어 열차의 유무를 검지하는 궤도회로, RFID와 차륜센서, GPS 등과 같은 여러 가지 방식으로 구현 연구가 되고 있다. 하이브리드 궤도회로는 안테나와 리더기를 차량에 설치하고, 태그를 침목위에 설치하여, 안테나에서 태그에 저장된 절대위치정보를 제어장치에 전송하여 열차위치를 인식하는 RFID 방식의 궤도회로이다. 열차위치검지기능에서 태그의 인식율은 열차운행의 안전에 직접적인 영향을 주게 되므로 고신뢰도를 요구한다. 본 논문에서는 방향각을 갖는 태그를 이용한 태그인식율의 향상에 관한 연구를 하였다.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.989-995
• /
• 2009

Short-time Fourier transforms(STFT)은 시간에 따라 변동하는 조화성분을 가지는 신호의 분석에 유용하게 적용되는 방법이다. 철도차량의 진동신호에서 많이 발견되는 운동학적 진동은 조화 특성이 속도 변화에 따라 점진적으로 변하기 때문에 오더 분석 방법과 상관함수를 이용하면 STFT 분석 방법을 개선할 수 있다. 본 논문에서는 차량의 속도 신호를 구할 수 없거나 잡음이 많을 때 상관함수를 이용하여 신호를 재추출하여 오더 분석을 적용하는 방법에 대하여 다룬다. 이 방법을 한국형고속열차의 운행 중에 취득한 차축 및 차체 진동데이터의 분석에 적용하여 기존의 STFT와 오더 분석을 이용한 방법을 비교 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1827-1832
• /
• 2007

The purpose of a railway track is to provide a smooth surface for safe and economical train transportation. The performance of the track results from a complex interaction of the track and subgrade components in response to train loading and environmental actions. In the past, the role of subgrade as the track foundation were not recognized adequately. There are insufficient information and inadequate methods for subgrade design, assessment and improvement. This situation has survived for a long time largely because a subgrade defect can often be adjusted by adding more ballast under the ties or applying more frequent track maintenance. Therefore, the application of reinforced roadbed technology will be expected to increase in the future. The reinforced roadbed thickness is set depending on subgrade reaction modulus$(K_{30})$ in the condition of upper subgrade through PBT in both conventional railroad and KTX railroads. As train velocity (V), train passing tonnage (N), and train axial load (P) are not considered in design, the roadbed thickness could be overestimated (or underestimated). Therefore, In this study, the computer model, GEOTRACK, was analyzed the influence of reinforced roadbed thickness factors on track modulus and the characteristics of stress pulses in track and subgrade generated by repeated axle loading.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.435-442
• /
• 2000

In this thesis the dynamic behavior of the vehicles is analyzed while the track is subjected to lateral vibration due to earthquakes. A computer program is developed which can simulate dynamic responses of vehicles subjected to earthquake loading. The analysis considers two types of two types of vehicles : I. e. a 2-axle vehicle with 13 DOF's an da power car of K-TGV with 38 DOF's It can also consider the interaction with substructures such as tracks and bridges. El Centro record is considered as earthquake loading. The creep force module developed in this study is verified and the results of this study are compared with those of others. Furthermore he running safety of high-speed railway vehicles(K-TGV) subjected to earthquake loading is studied. Based on the results of this study the running safety of the K-TGV can be confirmed against el centro earthquake.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2276-2279
• /
• 2011

The AUTS(Advanced Urban Transit System) are developed by government R&D business. This units are under main line performance test in Daebul test line. Both AC and DC could apply to the AUTS for pantagraph voltage. So main transformer and some high voltage filters are added to the under-frame. As a result the total weight of each car(Mc1-Tp1-M-T-Tp2-Mc2) is different. And axle load is different each other. The main characteristics of AUTS(Advanced Urban Transit System) are as follows. One inverter control one motor, DDM(Dircet Drive Motor), no driving gear, plug no end door, self-steering bogie etc. These matters could be appeared to strange vibration. So vibration test is important. The vibration test performed to Mc1 and Tp1. The results were checked to the up-down direction and left-right direction for acceleration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.435-437
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean hish speed train. The software controls the hardware of the measurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and running speed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.366-373
• /
• 2000

This paper represents the results carried out to determine the dynamic response characteristics of Korea High Speed Rail(KHSR) bridges. The responses of the KHSR bridges subjected to the moving train loading are obtained through the simplified method for the 2-dimensional train/track/bridge interaction analysis in which the eccentricity of axle loads and the effect of the torsional forces acting on the bridge are included for the more accurate train/track/bridge interaction analysis. The results of the analyses are compared with the field test data to verify the performance of the 2-dimensional train/track/bridge interaction analysis method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1703-1712
• /
• 2010

The safety of tilting train running on curved track is, in general, evaluated with a derailment coefficient calculated by the ratio of wheel load and lateral force, Particularly on curve, the wheel load and lateral force on rail may cause trackbed to be deformed, depending on their intensity, and moreover, often result in critical accident such as derailment. This study hence was intended to identify the cause of wheel load and lateral force so as to suggest the allowable wheel load reduction rate, lateral force limit and derailment coefficient, thereby quantitatively evaluating the operational safety of tilting train. This study therefore was aimed to analyze the wheel load and lateral force occurred during tilting train's operation on circular curve in such a way of comparing with traditional trains, by axle and speed, in a bid to eventually evaluate the operational safety of tilting train.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1759-1763
• /
• 2014

In this paper, we were performed a structural analysis and durability analysis for an integral frame with an axle according to development of the electric locomotive traction motor. In terms of the structural stability, as a result of the analysis modeling with coupling conditions of beam element and an alternative element of three-dimensional, the maximum von-Mises stress of the locking screw mounting frame were similar as 50MPa and 51MPa. Also A comparison of the natural frequency and the exciting frequency while driving of the electric locomotive No. 8200, the natural frequency is 627.05Hz~856.9Hz while the exciting frequency is not more than most 30Hz or 553Hz, 1110Hz. Therefore, it is possible to avoid the resonance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1581-1582
• /
• 2015

최근 많은 승객을 수공하는 대중 교통시스템의 안전에 대한 중요성이 더욱 대두되고 있으며, 고속화된 철도차량 또한 이를 피해갈 수 없다. 현재 철도차량의 사고 방지를 위해 많은 연구가 이루어 지고 있으며, 차량기지의 검수설비 및 검수시스템이 자동화되어 많이 발전되었다. 그 중 차축 초음파 탐상은 각 차량기지에 설치된 A-Scan 초음파 방식과 Phased Array 초음파 방식의 두가지 방식의 장비를 이용하여 차축 초음파 탐상이 이루어 지고 있다. 본 논문에서는 초음파 방식 중 철도차량 차축 결함 검출을 위한 A-Scan 탐상 방식과 Phased Array 탐상방식에 대하여 비교 분석하였다.