• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.619-626
• /
• 2011

In this paper, while electric multiple unit is moving on the rail, the content of measuring and analysing electric power consumption is mentioned. In order to measure the electric power consumption, we developed the power record analysis equipment and installed it the inside of the converter and inverter system to record the electric power consumption measured by voltage sensor and current sensor. Moving on the rail, we analysed traction power used up and regenerative power by using the measuring instrument. We expect that the measured and analysed data will offer basic research material to devise a energy reduction plan and introduce a new EMU system with high efficiency.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2594-2599
• /
• 2011

In Korea, the HEMU-400X(High-speed Electric Multiple Unit-400km/h eXpress) has been developed since 2007 and will be operated over 400km/h in 2013. It is necessary to prepare test-bed section in Honam high-speed railroad to take the maxim running speed test for the HEMU-400X developed. In order to determine proper test-bed sections for the maximum speed of 400km/h, TPS(Train Performance Simulation) program with the data of train model, running resistance, traction power and braking capacity was used to analyze the train performances such as locations, speeds and power consumptions by times. In this study, the specifications of the HEMU-400X project and the route conditions of the Honam high-speed railroad under construction were utilized for the TPS program to determine the optimal test-bed sections for the maximum speed of 400km/h.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.607-613
• /
• 2011

This paper reviews search methods of multiple reasonable paths to implement multimodal public transportation network of Seoul. Such a large scale multimodal public transportation network as Seoul, the computation time of path finding algorithm is a key and the result of path should reflect route choice behavior of public transportation passengers. Search method of alternative path is divided by removing path method and deviation path method. It analyzes previous researches based on the complexity of algorithm for large-scale network. Applying path finding algorithm in public transportation network, transfer and loop constraints must be included to be able to reflect real behavior. It constructs the generalized cost function based on the smart card data to reflect travel behavior of public transportation. To validate the availability of algorithm, experiments conducted with Seoul metropolitan public multimodal transportation network consisted with 22,109 nodes and 215,859 links by using the deviation path method, suitable for large-scale network.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권3호
• /
• pp.100-107
• /
• 2002

In this paper, we propose an expert system for electronic interlocking which enhances the safty, efficiency and expanability of the existing system by designing real-time interlocking control based on the interlocking table automatically generated using artificial intelligence approach. The expert system consists of two parts; an interlocking table generation part and a real-time interlocking control part. The former generates automatically the interlocking relationship of all possible routes by searching dynamically the station topology which is obtained from station database. On the other hand, the latter controls the status of station facilities in real-time by applying the generated interlocking relationship to the signal facilities such as signal devices, points, track circuits for a given route. The expert system is implemented in C language which is suitable to implement the interlocking table generation part using the dynamic memory allocation technique. Finally, the effectiveness of the expert system is proved by simulating for the typical station model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.528-533
• /
• 2004

The purpose of this thesis is to construct the autonomous decentralized train traffic management structure using techniques of Autonomous Decentralized System. Currently, a method of train traffic control is making use of CTC(Centralized Traffic Control). Its operation method is divided into the remote mode and the local mode. The classified basis is according to the control authority of install signals in track side. In most cases, a large scale station is operated by the local mode. Because of dispatchers in center can not control the shunting works influence on the main route. In order to solve these problem s, we analyzed a current operation condition and system requirements. Moreover, this thesis is constructing autonomous decentralized train traffic management structure. Finally, this research proposed that interface with CTC and step-by-step construction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1097-1100
• /
• 2005

This study explored the ridership pattern between Seoul and Busan after the introduction of KTX in 2004. Since the KTX opening, average daily passengers on the Kyungbu lines have increased. These figures clearly indicate that the transportation network is becoming railroad-centric. However, the operation. of the KTX will leave many existing Saemaul and Mugunghwa train sets idle, which will be put into operation for areas, not covered by the KTX. Statistics show that the railroad ridership is clarified the distinction between train service levels. So, our paper studied the change of market share by service levels between Seoul-Busan line which is a long distance route.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2007

To predict the fire and smoke hazards of rail car with a evacuation model is essential for achieving life safety of all passengers in the event of fire. Currently, more than 30 different evacuation models are available and expected increasing demand in high population density areas as a metro train station. This paper includes brief history of evacuation models and review some key factors of design egress scenario, these are pre-movement time, egress route, location of fire, overturned carriage, and configuration of rail car. Applying the egress model for rail passenger car, users need to confirm the model's ability of physiological, psychological responses effecting to pre-movement time of individual or crowd unit, representation of complexity of carriage layout, and evaluation of effects of smoke.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.65-70
• /
• 2000

Flying an aircraft is not like driving a train along a railway track. There are many factors that may affect an aircraft's course, including the wind speed and direction relative to the aircraft's intended flight path. This paper investigates noise exposed area by using INM. Especially, effect on aircraft route to minimise the number of people overflown by departing aircraft is evaluate. The result shows that track keeping scheme is effective to reduce the noise area. On the other track at 4000ft is negligible to the noise contour.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1859-1870
• /
• 2009

Suin line is expected to be opened completely in 2015 by three stages. And the line between Suwon and Incheon(54.0km) is under construction to supply the users of southwestern area transportation convenience. The route of Suin line will be constructed to share partly with Ansan line and connect directly with Bundang line to the east and Kyeongin line to the west. That's why a lot of difficulty in train and rolling stock operation IS expected. This paper proposes an alternative plan of train operation when the line is opened partly and completely and makes an optimally alternative plan through the analyses of transportation demand, the change of human resources of operation sector according to train operation plan by an alternative proposal and operation cost.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.684-690
• /
• 2008

LRT System Application Project is performed for the purpose of technical advancement and stabilization of K-AGT system from the viewpoint of practical use and commercialization. For those purpose, the performance test and evaluation procedure for signaling system have been developed, including the scheme of verifying the performance and function of signaling system under driverless multiple train operation environment. In this paper, multiple train operation scheme in K-AGT test line is presented. Test schemes for maintaining the safety distance between trains, operation scenario considering shunting and turning of train, and dia operation schemes in test line are reviewed while researching test vehicle features, route condition and running pattern. Additional equipments for testing each scheme are also reviewed.