• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1568-1569
• /
• 2005

This paper presents a method to optimize train radio communication network for train control(CBTC) or multimedia services. To determine the optimized distance between wayside radio stations in a radio communication network constructed along railway, radio frequency allocation and hand-over capability is studied in terms of radio communication cell coverage and roaming feasibility.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1621-1627
• /
• 2013

This paper compares power losses between voltage controlled before and after using power conversion device in AC feeding system. For this purpose we present voltage control procedures and criteria and model high speed line and train using PSCAD/EMTDC to compare power losses in various feeding condition. Power losses of the simulation result in power control before and after in single point feeding system was reduced maximum 0.37 MW(23.8 %) and average 0.23 MW(20.5 %) when one vehicle load operates maximum load condition. When three vehicles operate maximum load condition in one feeder section, power losses after voltage control was reduced 1.03 MW(49.5%) compared to before voltage control. And, power loss of parallel feeding system is reduced the average 0.08 MW(7.2 %) compared to the single feeding system. In conclusion, adaptive voltage control method using power conversion device can reduce power losses compared with existing method.

• 한국철도학회논문집
• /
• 제9권3호
• /
• pp.319-324
• /
• 2006

Studied was a strategy of technology development for railway system in terms of railway network. First, The successful launch of the Korean HST system has not only decreased logistics burden but also significantly transformed the Korean trunk-line railway network, revolutionizing the logistics and technology sectors and reinvigorating the Korean railway industry in one century. Korean railway industry sector is now investing to develop many different types of railway system(G7, Post G7, tilting train...) so that these kinds of various railway system development should be integrated with the National Inter-modal Transportation Network Plan. To secure sufficient capacity that is required by the National Railroad Plan, the railway industry needs to establish mid- and long-term train purchase and operation strategies in compliance with railway construction and operation policies. During a railway construction planning, train operators, based on their train operation strategies, should come up with measures to closely cooperate with project operators from the planning stage through to the opening of a railway system. To be more precise, train operators should establish long-term train procurement plans reflecting both long-term national railroad network plans and plans for each railway line in order to suggest appropriate roles and schedules for each line. Also, based on the long-term railway plan, directions should be decided concerning the research and development of trains in advance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.366-368
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU(Electrical Multiple Unit) and TCMS(Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) method, which is the layer 2 DDLM (Direct Data Link Mapper) protocol of ProfiBus.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.307-313
• /
• 2002

Due to the fact that high speed railroad will be opened to traffic and TSR and TCR will be connected to Korean railroad network in near future, the efficient operation methods of Railroad freight transportation have been embossed as a matter of concern. But, it is true that the present level of our railway infrastructures and operation systems are still low. This study examines the freight transportation system and introduces new logistic service systems including network strategies and terminals which are haying developed overseas to increase the efficiency of existing railroad transportation system. In case of giving careful consideration to the new methods, it is expected that the high developed freight transportation systems will be applicable to our country.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1187-1192
• /
• 2003

The railroad noise has been considered as one of environment pollution and complaints about it have been increasing every you. Therefore, the establishment of railroad noise monitoring network is necessary. It will be designed for monitoring railroad noise, storing data of railroad noise continuously and providing the fundamental knowledge for the measures of railroad noise. For this, we investigated the actual condition of railroad noise and status of noise level by floor in apartments around the capital region, Daejeon, Daegu, Gwangju, and Busan. Additionally, we present the basic data that will be used for predicting the noise level near railroad in the environmental impact assessment

• 대한전기학회논문지:전력기술부문A
• /
• 제49권12호
• /
• pp.602-607
• /
• 2000

This paper presents the new simulation algorithms using network methods to analysis the steady-state train voltage distribution characteristics in ac auto-transformer fed railroads. In general, the supply system of railroads is composed of non-symmetrical and unbalance transmission line. Therefore, the general method using simplified old algorithms have the self-contradictory errors because the supply line of train railroads is completely unbalanced. In this paper, the simulation results of new developed algorithms is compared with those of EMTP to confirm the effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1329-1331
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.478-479
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed. In this paper, we proposed network-based telemetry system for condition monitoring in railway and acquired data from any kind of sensor in catenary line and structure at high voltage. This development gives the solution for online condition monitoring in railway. To check the validity of our approach in terms of application, we realized network-based telemetry System.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.581-582
• /
• 2006