• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.604-613
• /
• 2018

In recent years, numerous train derailment accidents caused by deterioration and high speed technology of railways have increased. Guardrails or barriers of railway bridges are installed to restrain and prevent the derailment of the train body level. On the other hand, it can result in a high casualties and secondary damage. Therefore, a Derailment Containment Provision (DCP) within the track at the wheel/bogie level was developed. DCP is designed for rapid installation because it reduces the impact load on the barrier and inertia force on the steep curve to minimize turnover, fall, and trespass on the other side track of the bridge. In this paper, DCP was analyzed using LS-Dyna with a parameter study as the impact loading location and interface contact condition. The contact conditions were analyzed using the Tiebreak contact simulating breakage of material properties and Perfect bond contact assuming fully attached. As a result, the Tiebreak contact behaved similarly with the actual behavior. In addition, the maximum displacement and flexural failure was generated on the interface and DCP center, respectively. The impact analysis was carried out in advance to confirm the DCP design due to the difficulties of performing the actual impact test, and it could change the DCP anchor design as the analysis results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.632-637
• /
• 2010

The measurement of contact wire wear in electric railways is one of the key test parameters to increase speed and maintain safety in electric railways. Wear caused by continuous interaction between pantographs and contact wires has a negative effect on current collection quality and severely damaged contact wires might cause hazardous accidents. This paper introduces a non-contact optical-based contact wire wear measuring system that will replace conventional wear detecting methods conducted by maintenance vehicles or workers. The system is implemented by high-speed cameras that can collect images of contact wires during vehicle operation, a laser used to create images profile of the contact wire surface, and a computer used to process the collected images. The proposed system is designed to assist maintenance of overhead contact lines by creating geometrically plotted images of contact wires to detect contact wire wear during operation on conventional lines or high-speed lines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3444-3449
• /
• 2013

The control module controlling points has become high-tech. but the introduction of relevant company's inspection intervals and methods, and the adoption of the way which is used in relay interlock system became the cause of a failure by excessive and incorrect maintenance. The Human error in failure recovery process can cause vital accidents including train derailment, the points monitoring system could prevent this problem by monitoring points' operation condition in real time. After conducting the changed inspection intervals that applied the results of the criticality of each failure type, MTBF, MTTR, availability, maintainer's opinion, the work became simplified, and, the failure did not occur for 4 consecutive years in contrast to the previous annual average of 11 failures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.42-53
• /
• 2006

In Korea, the railway history has more than 100 years and the KTX(Korean Express Railway) was launched on April 1, 2004. Nevertheless, the safety management of the railway has not been emphasized. Thus this paper proposed the novel frame of the railway safety management system which can secure the railway safety and administer the railway accidents via Management Systems from domestic to international. Secondly, we developed the prototype Management System for the railway accident based on GIS(Geographic Information System) by introducing the concept of "location". This Management System has two parts: space and attribute. Also it provides the map for emergency actions.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.638-645
• /
• 2007

Computers are increasingly being introduced into safety and reliability critical systems. The safe and reliable operation of these systems cannot be taken for granted. Malfunctions of these systems can have potentially catastrophic consequences and they have already been involved in serious accidents. Software fault prevention, fault tolerance, fault removal and fault forecasting are the techniques to be used, implemented and verified for embedded software in critical systems as the contributors to safety and reliability of the software. To use them when developing a software product, a relationship must be established between them and the development processes, the methods and techniques to be used to develop software, as well as with the different product architectures. Railroad signaling system software is a safety-critical embedded software with realtime and high reliability requirements. The primary purpose of the safety management is to prevent the loss of lives or physical damages arising from potential hazards in the railroad signaling system. This study provides a systematic approach to analysis of potential hazards for their management during the system life cycle to assure the identification and definition of the most appropriate hazards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.471-478
• /
• 2013

In this paper, we have designed and implemented an obstacle detecting device based laser radar. It is an alternative to solve through problem analysis of that are currently operated safety equipment and status research of domestic railway crossing. It is target to improve the safety and reliability of the rail traffic through effective obstacle detection at crossing account for a large proportion of train accidents. suggest a system to overcome the problems caused by aging and limitation of existing safety equipment. Design a crossing obstacle detection device that utilizes laser radar scanner, proved this through performance evaluation and testing of the prototype.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• International Journal of Safety
• /
• v.10 no.1
• /
• pp.36-40
• /
• 2011

Personnel maintaining or repairing the railway tracks or signaling facilities around tracks may experience the sensory disorder when doing maintenance works at the trackside of railway for long time. In this case personnel maintaining at the trackside may collide with the train since they cannot recognize the approach of motor-car although it approaches to the vicinity of maintenance workplace because of the sensory block phenomenon occurred due to their long hours of continued monotonous maintenance work. In order to prevent such motor-car accidents that may occur because railway track workers are unable to recognize the approaching train, the safety alarm equipment is developed to make the approaching motor-car send radio signals and bidirectional detection mechanism between approaching train and trackside personnel. It shows the possibility of utilization in various forms of safety equipment for workers only to the safety helmet to be worn by the maintenance workers while using the configuration of transmitting/receiving sides. In the paper it is represented new alarm equipment, which is the bone-anchored speaker-based safety helmet to be worn by the maintenance workers.

• Journal of Korean Society of Transportation
• /
• v.24 no.4 s.90
• /
• pp.93-101
• /
• 2006

The signalized intersections near highway-railroad grade crossing are operated without signal preemption in Korea when trains are approaching the crossing. This signal operation is very dangerous because queues from the intersection can extend back over the track, thereby creating the Potential for a serious vehicle-train accident. And the queues from the crossing can extend to the intersection with the normal signal operation while trains Pass the crossing. In this case the intersection is disrupted, and delay and the Potential for vehicle accident increase highly In order to improve the intersection performance and Protect the accident the crossings and intersections. signal Preemption designed to provide a special control mode should be implemented. In this study it was shown that intersection Performance near highway-railroad grade crossing improved using signal preemption. When signal Preemption is implemented at the test site, the delay was reduced by about 9sec/veh. Even though there were vehicle-train accidents at the crossing in all 30 simulations without signal preemption. there was no vehicle-train accidents at all when signal preemption is used.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1064-1069
• /
• 2014

The railway signalling system plays an essential role in the headway and routing control for a safe and efficient train operation. The reliable and safe operation of the system is very important because the failure of the railway signalling system can lead to the collision, derailment, or unexpected stop of a train. So far, the conventional wayside signal mode (ATS: Automatic Train Stop) has been generally used as the railway signalling system. However, this system is highly linked to a risk of major accidents resulted from human mistakes such as missing a signal or careless control of train speed. Accordingly, the onboard signal mode (ATC: Automatic Train Control) as an alternative of ATS has been recently introduced and applied to transmit effectively the information on speed control of a train by using computers and communication equipment. In the process of replacing the obsolete signal system, it is necessary to switch over the system while providing passengers with normal services. Therefore, the integration of a railway signaling system compatible for both ATS and ATC and its interface is discussed in this study. In particular, the implementation scenario required for operation planning of the integrated system was designed, and the results as well as effects of its applicability test were also presented.