• Korea Trade Review
• /
• v.41 no.3
• /
• pp.109-133
• /
• 2016

Major nations undergone grand national strategy regarding Eurasia such as China's One Belt and One Road Strategy and Korea's Eurasia Initiative owing to Eurasia's regional importance. Korea's Eurasia Initiative aims to make one continental, creative continental, peaceful continental with intra-Eurasian nations as grand national strategy is based on creative economy, undertaken by President Park's Government for the future of Eurasia after the Northeast Asian logistics hub strategy. Eurasia Initiative includes logistics network project as an important one which consists of Eurasia Friendly Express, Rajin-Hassan logistics project, the Arctic Ocean route project and Rail transport network project. The success of Eurasia Initiative depends on North Korea. The purpose of this paper is to contribute to the improvement of prompt logistics network by networking main rail transport and other transports such as inland waterway transport and air transport by studying the current situation of Eurasia Express project, including rail transport network and the efficient methods of Eurasia logistics. The efficient methods of rail transport network under the Eurasia initiative are construction of multimodal logistics network connected with rail, international cooperation for logistics standardization in Eurasia, Eurasia nations' subscription of logistics-related conventions and projects performance based on these conventions, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.792-799
• /
• 2017

The real time unmanned monitoring system of an equipment's internal parts and condition requires the monitoring device to be able to stop at a set location on the rail. However, due to the slip between the driving surface and the roller, an error occurs between the actual position and the command position. In this paper, a method to compensate the position error due to the roller slip is proposed. A proximity sensor located at both ends of the rail detects the starting point and the maximum position pulse, linearly compensating the error between the angular position of the motor and the mechanically fixed starting and maximum position pulse of the rail in forward and reverse direction. Moreover, unlike the existing servo position controller, the motor adopts the position detection method of Hall sensor in BLDC (Brushless DC) and applies an algorithm for low-speed driving so that a stable position control is possible. The proposed rail guided unmanned monitoring system with driving slip compensator was tested to verify the effectiveness.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1765-1768
• /
• 2009

Honam area is one of the under-industrial areas in Korea and because of this it has low weight in the total container transportation in Korea. Also the railway distance from honam area to the main container ports like Busan port and Gwangyang port is so short that the portion of rail container transportation occupies about 10 percent in total container transportation amount in Honam area. But on the contrary of those situations, 1st step Jangsung inland container depot (ICD) was finished as one of the main logistics facilities in Korea and 2nd Jangsung inland container depot is under construction. To promote rail container transportation in Honam area which has shortage of container transportation demand, it is necessary to give adequate transport service to the client. So, this research studied some methods for promoting rail container transportation in Honam area. The subject of survey is freight agent and survey items are selected to find the present situation of rail container transportation in Honam area. And from the survey results various strategies will be suggested to promote rail container transportation in Honam area.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.606-612
• /
• 2008

Creep force is one of the only appeared at conventional train which used to be driven by metallic wheel and rail contact. Due to the elastic deformation of wheel/rail contact patch by the weights of wheel and all the components related to it, creep force generates and becomes to the decision factor of critical speed of bogie(or railway vehicle) which is the criteria of avoiding vehicle to be unstable. There are many kind of factors which affect generation of creep force at a wheel/rail contact surface such as viscosity of contact patch, velocity, wheel and rail geometric profile, mechanical properties of wheel and rail. This paper concentrates on a wheelset simple 2 DOF Equation of Motion being exerted. From the simple numerical analysis using linear solution about getting creep force some factors could find roughly. Among the factors geometric parameter could be the one of most important for this study. In the future we'll prolong the range of study to find out method of measuring creep force easily.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2153-2162
• /
• 2011

The goal of this Paper is to reduce rail's wear in curved track by applying an additional surface layer material(High hardness and High resistance capacity of wear) on the top of the railhead. In order to evaluate appropriation of a coating material, experimental tests such as the varieties of fundamental properties tests (hardening, wear, tensile, and bending) and RCF(rolling contact fatigue)test were performed to establish fatigue wear and damage mechanism. As a result, wear performance of coating rail is better than heated rail about 6times and normal rail about 8~9times.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.365-368
• /
• 2005

The dynamic model was developed to analyze vibration acceleration and ride comfort during the operation of rubber-tired light rail vehicles. The ride comfort for standing passengers was analyzed in accordance with ISO 2631-1, UIC 513R, and CEN Draft prENV 12299 using this model. The result was applied to the detail design of Korean-standard, rubber-tired light rail vehicles, and the detail specifications related to ride comfort was determined based on this result. The ride comfort test was performed along the test track by using 2 car-train, and its result was compared with that of the ride comfort analysis, verifying the validity of the developed dynamic model. It was also verified whether or not the developed Korean-standardized, rubber-tired light rail vehicle met specified target specifications on ride comfort.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1207_1208
• /
• 2009

It is expected that standardized framework for urban rail transit system will contribute to more convenient and safe traffic service and ensure higher reliability and availability of urban rail transit rolling stock and infrastructure. Information and telecommunication system in urban rail transit consists of various subsystems, such as radio communication system, digital transmission system, integrated monitoring system and public addressing system and its standardization will be implemented based on these subsystem. Public addressing system is to provide information related to operation and emergency for passengers and operators. In this paper we suggest draft criterion of public addressing system for urban rail transit through functional analysis and comparison on the present state of the system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1238-1245
• /
• 2000

One of the main causes of severe wear or crack initiation in wheel and rail is the contact stress due to wheel-rail contact. First, we obtain contact stress due to the rail mounting slope using the finite element method. Second, the shape design based on more reasonable contact stress analysis rather th~n a general Hertzian contact theory is investigated in order to reduce the contact stress. The optimum -design is performed using the simple 2-D finite element model and its results are verified by 311) finite element analysis.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.594-599
• /
• 2007

According to separation policy between rail infrastructure and operation, the National Railroad Administration was converted to Korea Railroad Cooperation on Jan, 2005. That makes railway service assessment regarded as essential. About this matter, Section 15 of the Framework Act on Rail Industry Development and section 26 of the Rail Business Act shows that the railway service assessment should be conducted every 2 years. The government can officially announce the result and give orders operation company to improve service level. In the first railway service assessment in 2006, the principal railroad lines and stations were investigated. Rail supply service index and customer satisfaction index are introduced. It includes service items of supply, reliability, convenience, safety and customer satisfaction. This study presents the contents of 2006 rail service assessment. Some points of assessment which should be improved are analyzed as well.