• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.205-210
• /
• 2001

Fatigue crack growth tests were carried out using high manganese cast steel under constant amplitude loading. Average crystal grain sizes of the material are $200{\mu}m$ and $1000{\mu}m$. For this material, ${\Delta}K_{th}$ is about $8MPa{\sqrt{m}}$ which is quiet large as compared to the general structural steels and the crack growth rate is lower than the general structural steels especilly in the low ${\Delta}K$ regsion. The reason of this behavior is crack closure due to fracture surface roughness and fretting oxide. The relationship between da/dN and the ${\Delta}K_{eq}$ was represented by narrow band regardless of the stress ratio.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1319-1327
• /
• 1994

레일강에 있어서 피로균열은 레일의 파괴와 그에 따른 열차탈선의 근본적인 요인으로서 실험실시험의 분석 결과에 의한 피로거동 및 파괴특성의 정량적 평가는 피로수명 추정 및 안전조사 주기설정의 기본이 된다. 따라서 본 연구에서는 살피충격시험의 결과로부터 레일강의 샬피거동 및 파괴인성거동을 평가하고 일정진폭하중하에서 피로시험의 분석 결과로부터 피로균열성장거동에 미치는 균열의 방향성, 온도, 그리고 응력비 R의 효과를 파괴역학적 수법을 도입하여 평가하였다.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.245-251
• /
• 2016

Galvanizing method has been extensively used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for ship building and various types of steels for the industrial fields etc.. However, the galvanized structures would be inevitably corroded rapidly with increasing exposed time because an acid rain due to environmental contamination has been much dropped more and more. Therefore, it has been made an effort to improve the corrosion resistance of the galvanizing film through various methods. In this study, comparison evaluation on the corrosion resistance of three types of the samples, that is, the hot dip galvanizing with pure zinc(GI), the hot dip galvanizing of alloy bath with zinc and aluminum(GL) and the pure zinc galvanizing steel immersed again to chromate treatment bath(Chro.)were investigated using electrochemical methods in 1% $H_2SO_4$ solution. The Chro. and GI samples exhibited the highest and lowest corrosion resistance respectively in 1% $H_2SO_4$ solution, however, the GI sample revealed the highest impedance at 0.01 Hz due to its high resistance polarization caused by corrosion products deposited on the surface, while Chro. sample exhibited the lowest impedance at 0.01 Hz because of little corrosion products on the surface. Consequently, it is suggested that the chromate treated steel has a better corrosion resistance in acid environment compared to pure galvanizing(GI) or galvalume(GL) steels.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.644-649
• /
• 2017

자동차 산업에서는 환경 문제와 국제 유가 상승 등으로 인한 차량 경량화에 대한 요구가 증대되고 있다. 이에 따라 알루미늄 합금과 특수 소재 등이 차량 중량을 줄이는데 활용되고 있지만 비용과 강도 측면에서 철강소재를 극복하기 에는 여전히 많은 어려움이 있다. 따라서 강도와 성형성이 좋은 AHSS(Advanced High Strength Steel) 소재의 적용이 증가하고 있다. 특히 운전자 보호를 위한 안전 규제가 강화되면서 센터필러 (Center Pillar), 루프레일 (Roof Rail) 부분에 1.2GPa급 초고강도 강재의 적용이 점차 늘어나고 있으며 이종강재에 대한 자동차 차체 적용 또한 점차 증가하고 있다. 본 연구에서는 SGAFC1180 1.2t 강재의 저항 점용접성 및 용접부의 특성을 파악하였다. 시뮬레이션을 이용하여 너깃의 생성 및 성장 거동을 관찰하였으며 예측 성능은 오차율 10% 이내에서 유사한 경향을 나타내었다. 또한 이러한 거동이 공정변수인 동저항에 미치는 영향을 파악하였고 전단인장강도 및 너깃 직경과의 상관관계를 고찰하였다. 본 연구를 통하여 동저항의 패턴을 인식하여 패턴의 형태에 따라 용접 상태를 분류하고 용접 품질을 판단하는 시스템도 제안할 수 있을 것으로 사료된다.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.