• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.667-672
• /
• 2013

This paper presents the development of a condition monitoring system that monitors the operating conditions of a reduction unit, such as the bearing temperature, gearbox vibration, and gear oil deterioration, and notifies the operator of potential problems or abnormal conditions. A series of field tests on high-speed rail and conventional lines was performed to identify the characteristics of temperature rise and vibration levels on the reduction unit during operation. The monitoring system was designed based on the proper sensor selection, measurement method, and signal analysis to optimize the interface with the operating system of high-speed trains. Application of this monitoring system to high-speed trains will play an important role in their proper maintenance and safe operation.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.35-40
• /
• 2007

Our environment is faced with serious problems related to the air pollution from automobiles in these days. In particular, the exhaust emissions of diesel engine are recognized main cause which influenced environment strong, In this study, the potential possibility of biodiesel fuel was investigated as an alternative fuel for a naturally aspirated common rail diesel engine. The smoke emission of biodiesel fuel 5vol-%(min. content) was reduced in comparison with diesel fuel, that is, it was reduced approximately 60% at 4000rpm, full load. But, power, torque and brake specific energy consumption didn't have no large differences. But, NOx emission of biodiesel fuel was increased compared with a commercial diesel fuel. Also, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission has been investigated. It was found that simultaneous reduction of smoke and NOx was achieved with biodiesel fuel(5vol-%) and cooled EGR method($5{\sim}10%$) in a common rail diesel engine.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1964-1969
• /
• 2012

This paper presents to verify the selective grounding fault protective relaying technique for the ungrounded DC traction power supply system. This system selectively blocks fault section when grounding fault occurred. In order to perform this verification, field test facilities have been installed on Oesam substation and Worldcup-Stadium substation, and field test process has been suggested. Also, selective grounding fault protective relaying components and rail voltage reduction device have been tested with the various trial examinations. In order to compare and evaluate performance of the selective grounding fault protective relaying function, field test system was modeled and the system fault simulation results were compared and evaluated with the field test result. Performance of selective grounding fault protective relaying function was evaluated with the above-mentioned process, and the fact that the system recognizes fault section irrespective of insulation between rail and ground and fault resistance from grounding fault.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3019-3025
• /
• 2008

An experimental study was performed to assess the effect of diesel and JP-8 aviation fuel on the spray characteristics, performance and emissions in a single cylinder optical diesel engine. Both fuels were injected via an 8-hole solenoid-driven injector in a common-rail injection system. For better understanding of spray development, the macroscopic images were captured with high speed camera, offered evidences for the results of performance and emissions. From macroscopic spray images, the spray tip penetration of JP-8 shorter than that of diesel while spray angle of JP-8 was wider than that of diesel. It indicates that the vaporization of JP-8 is superior to that of diesel. The lower cetane number of JP-8 resulted in increased portion of premixed combustion. The IMEP with JP-8 is lower than that of diesel-fueled engine. Especially, using JP-8 has a potential for reducing soot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.201-203
• /
• 2009

This paper presents the real time stray current monitoring techniques on the DC railway system. These techniques are two types. The first one is the rail potential measurement technique between running rail and earthing mats on the important locations such as substation, station, and so on. And the second one is measurement technique of stray current through substation earthing mats and from collection mats, and continuous monitoring of return currents through the running rails. We need to apply these techniques on DC railway system to monitor stray current periodically and maintain the system properly.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.892-898
• /
• 2011

In DC electric railways, while an electric rail car is driving, a part of the working current returned to the substation through rails leaks into the ground. Such a stray current causes railway facilities and metal objects to corrode electrolytically. Therefore, change of stray current needs to be monitored constantly. But so far in domestic, the research on stray current measuring techniques and system adaption are insufficient. To estimate stray current, this paper addresses a method of monitoring the return current that is returned into the negative pole of the substation in real time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1189-1194
• /
• 2011

도시형 자기부상열차는 전자기력으로 레일에서 낮은 높이로 부상하여 운행되는 열차이다. 자기부상열차는 궤도와의 직접적인 접촉 없이 움직이기 때문에 소음이 적고 기계적 마찰에 의한 진동이 거의 발생하지 않는다. 또한 급곡선 주행이 가능하고 경사도가 높은 언덕지역도 쉽게 주행 할 수 있기 때문에 도심에서의 새로운 교통수단으로 주목받고 있다. 따라서 도시형 자기부상열차의 성공적인 실용화를 위하여 제3궤조 전차선로 설비와 인터페이스를 통하여 안전성과 신뢰성 확보는 필수 고려 사항중 하나이다. 특히 파워레일, 신축확장장치, 절연 구분장치, 지지금구와 같은 제3궤조 전차선로 설비는 내 부식성, 시공의 편의성 및 유지보수성을 고려하여 설치되어야 한다. 본 논문에서는 자기부상열차 시스템 구축을 위한 제3궤조 설비의 구성요소에 대한 인터페이스 항목을 분석하고 전차선로의 안전성을 높일 수 있는 시스템 엔지니어링 인터페이스 체계를 제시하고자 한다. 또한 제안하는 자기부상용 제3궤조 전차선로 시스템은 한국기계연구원내 시험을 통하여 시스템의 안전성을 증명하였으며, 시스템 구성품의 수명분석을 통해 제3궤조 전차선로 운영의 신뢰성을 향상시키고자 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.91-96
• /
• 2006

This paper shows quantatively the cause of electric power induction that was occured by flowing current when high speed electric car travels and the investigation of earth potential upswing and animal damage example by rail leakage current.

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.187-192
• /
• 2010

Korean railway has run about 110 years since 1989 and played a great role of industrialization in Korea. It is known that rail transport systems have many advantages of being more safe, energy-efficient, and environment-friendly, as compared to other transportation systems. However, railway incidents are often attributed to the failure of safety management and critical to the efficiency of railroad industry. This study reviewed economic, financial, and general statistical information on Korea Railroad. Based on the statistical data, the effect of accidents on railroad management was analyzed. Correlation analysis revealed that railway accident had a negative effect on the gross profit of Korea Railroad. In order to reduce potential risks and incident rate, some recommendations are proposed. Actual or potential applications of this research include safety guidelines for improving efficiency of railroad industry.

• Steel and Composite Structures
• /
• 제6권4호
• /
• pp.319-333
• /
• 2006

A rectangular plate made of a porous material is the subject of the work. Its mechanical properties vary continuously on the thickness of a plate. A mathematical model of this plate, which bases on nonlinear displacement functions taking into account shearing deformations, is presented. The assumed displacement field, linear geometrical and physical relationships permit to describe the total potential energy of a plate. Using the principle of stationarity of the total potential energy the set of five equilibrium equations for transversely and in-plane loaded plates is obtained. The derived equations are used for solving a problem of a bending simply supported plate loaded with transverse pressure. Moreover, the critical load of a bi-axially in-plane compressed plate is found. In both cases influence of parameters on obtained solutions such as a porosity coefficient or thickness ratio is analysed. In order to compare analytical results a finite element model of a porous plate is built using system ANSYS. Obtained numerical results are in agreement with analytical ones.