• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.33-43
• /
• 2016

Public transportation card data, which is collected for purposes of the Integrated Public Transportation Fare System, provides neither transfer time nor transfer frequency occurring on the metropolitan city-rail (MCR). And because there are no transfer toll gates installed on the MCR, data on transfers between lines are estimated through means such as elicitations using survey questionnaire, or otherwise through macroscopic observations, which poses the risk of transfer time and frequencies being underestimated. For the accurate estimation thereof, an explanation of the transit path that arises between the Entry-and Exit-Gates must be provided. The purpose of this research is twofold : 1) to build a transit path model to reflect the current state of transfer movements on the basis of transportation card reader data, and 2) to deduce information on transfers occurring in the greater metropolis. To achieve these aims, the idea of Big Nodes is introduced in the model to align transportation card reader operation system characteristics with those of the MCR network. The link-label method is applied in the model as well to make certain that the MCR network runs in an effective manner. Administrative information obtained by the transportation card reader is used to derive transfer time and frequency both in the city's mid-zones, and in the Seoul-Gyeonggi-Incheon district's large-zones. Public transportation card data from a single specific day in year 2014 is employed in the building of the quantified transfer specific data. Extended usage thereof as providing comprehensive data of transfer resistance on the MCR is also examined.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.549-562
• /
• 2017

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.40-53
• /
• 2018

In smart card data, movement of railway passengers appears in order of smart card terminal ID. The initial terminal ID holds information on the entering station's tag-in railway line, the final terminal ID the exit station tag-out railway line, and the middle terminal ID the transfer station tag subway line. During the past, when the metropolitan city rail consisted of three public corporations (Seoul Metro, Incheon Transit Corporation, and Korail), OD data was expressed in two metrics of initial and final smart card terminal ID. Recently, with the entrance of private corporations like Shinbundang Railroad Corporation, and UI Corporation, inclusion of entering transfer line terminal ID and exiting transfer line terminal ID as part of Chain OD has become standard. Exact route construction using Chain OD has thus become integral as basic data for revenue allocation amongst metropolitan railway transport corporations. Accordingly, path detection in railway networks has evolved to an optimal path detection problem using Chain OD, hence calling for a renewed solution method. This research proposes an optimal path detection method between the initial terminal ID and final terminal ID of Chain OD terminal IDs within the railway network. Here, private line transfer TagIn/Out must be reflected in optimal path detection using Chain OD. To achieve this, three types of link-based optimum path detection methods are applied in order of 1. node-link, 2. link-link, 3. link-node. The method proposed based on additional path costs is shown to satisfy the optimal conditions.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.91-118
• /
• 2009

In the Republic of Korea, Regional Airlines from Jeju Air and Hansung Airlines have recently entered the domestic market to compete with the existing Legacy Airlines. In addition many of newly established regional low cost carriers like Air Busan, JeanAir, Easter Airline, are preparing to enter the jungle market. These circumstantial changes have come about as transportation competitiveness are getting weak in the market due to simultaneous expansion of surface modes such as a new opening of high-speed rail and extension of highways. The jumbled market entry by regional low cost carriers makes an enormous influence not only in managing transport network of existing carriers but also for the domestic policy of aviation authorities. It is too early to judge whether they would succeed or not. It is necessary to analyze the network operation of these regional carriers launching domestic routes and preparing to launch short distance international routes under the rapid changing market circumstances such as introduction of KTX or decrease in domestic routes by Legacy Airlines. Many regional airlines are to launch the routes connecting Korea-China-Japan, if they could ensure long-haul international routes successfully, it would follow that the difference between Legacy Airlines and Regional Airlines would decrease more and more, which would result in appearance of the $3^{rd}$or $4^{th}$Legacy Airlines The purpose of this study is to analyze the introduction of low cost carriers by regions and economic regional carrier network for non-scheduled air transportation market by taking a look at the regional airlines transportation network in the early stage of the domestic air transport market. For this purpose, cost and profit structure and management effect of transportation cost will be analyzed by comparing the presently operated routes of regional airlines with those of Legacy Airlines. And also demonstrative analysis demanded by the actual market will be achieved through surveys from experts, the actual airlines and travel agencies to build up transportation network.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.8
• /
• pp.37-44
• /
• 2013

The superiority of bearing ground anchor system has been recognized for the stability and economical efficiency since 1950s in Japan, Europe and etc. The ground anchor introduced in Korea, however, has the structural problem that the tensile strength comes only from the ground frictional force caused by the expansion of the wedge body and it is impossible to evaluate the bearing resistance because the adhering method of the anchor body to hollow wall is not appropriate. In this study, the underreamed ground anchor system was developed so that the bearing pressure of ground anchor can exert as much as possible. And the in-situ tests were performed to evaluate the pullout behavior characteristics and to verify the decreasing effect of the bonded length. The pullout tests were performed with the non-grouted tension condition and grouted tension condition in order to identify the pull-out resistance of each conditions. In addition, it was compared with the results of friction anchor. Finally, the numerical analysis was fulfilled to verify the bearing effect at the bonded part through the detailed modeling by PLAXIS-2D, which is general finite element method analysis program.

• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.105-113
• /
• 2017

Recently mountain tourism has been promoted and introduction of railroads with utilizing mountain resources is being planned. With the government policies to increase the share of eco-friendly transportation on railroad, national double-tracking of single rail and improvement projects are on going. However, the eco-friendly railroad policy suggests the environmental impact assessment items only on air quality, water quality, geographical/geological features, fauna/flora, natural/environmental resources, noise/ vibration, and recreation/landscape. And for fauna/flora and natural/environmental resources, confirming the presence of environmental protection zone is enough to satisfy legal requirement. This study suggested to evaluate environmental/ecological values with quantitative data. Evaluation indices and evaluation items have been selected to provide the data. Each of the subject map and railroad network was overlapped. The study selected naturalness and diversity as major indicators and calculated weight values of the items under the indicators, which are to be usd for the selection of the sites for railway development. This assessment method could be applied to the environmentally friendly construction of railroads in the future.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.7-17
• /
• 2005

Transportation is from an individual mobility. Various efforts to propose specific values or the individual mobility have been conducted in diverse transportation environment. However, mobility studies for multimodal public transportation are rare especially on not the range of line but area. This study propose a method to calculate transit mobility indices as expanding mobility analysis from point-to-point to area-to-area, considering access time to transit facility, running time and transfer time of passengers. To extract mobility indices, we included walking as a lowest category of mode and set passenger car as a competitive mode to transit mode. This study propose three public transportation mobility indices as 1) how competitive public transportation facility is offered against passenger car 2) how convenient transit mode including walking is provided against passenger car from origin to destination and 3) how many various paths are presented to support passenger's travel between regions. These indices are tested on the Seoul metropolitan area with 10 lines of urban rail and about 420 lines of bus. In addition, we proposed two political applications of proposed mobility indices to increase public transportation mobility between two regions and to maximize the mobility of study area when a line is added in the area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3632-3637
• /
• 2009

In this paper, we describe the performance results of the field installation test which is required to practicalize the single-phase MJ81 Switch Point Machine. This product has passed the certified test through performance improvement of driving parts in order to use 3 phase MJ81 Switch Point Machine, which is localized by taking over technology from Alstom and Cogifer when constructing Seoul-Busan rapid-transit railway, without change of the electrical equipment at track-side in domestic existing lines which single-phase 220V is used. KRRI and Samsung SDS have localized the single-phase MJ81 Switch Point Machine to improve the speed and safety of the conventional lines through the existing railway technology development project. For practicalization of this, we should, however, verify the performance through not only field installation test in real lines but also interface test with the interlocking. In this paper we verify the practicality of the domestic single-phase MJ81 Switch Point Machine through analysis on the performance result of the field installation test as well as the research contents for this test. Thereby, in Feb 2009 we have received an order from the Korea Rail Network Authority and are currently installing the single-phase MJ81 Switch Point Machine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.545-551
• /
• 2018

For domestic application of the temperature gradient model proposed by foreign design standards, a specimen of steel box girder bridge was fabricated with the following dimensions: 2.0 m width, 2.0 m height and 3.0 m length. Temperature was measured using 24 temperature gauges during the summer of 2016. The reliability of the measured data was verified by comparing the measured air temperature with the ambient air temperature of the Korea Meteorological Administration. Of the measured gauges, four temperature gauges that can be compared with the temperature difference of the Euro code were selected and used to analyze the distribution of the measured temperatures at each point. The reference atmospheric temperature for the selection of the maximum temperature difference was determined by considering the standard error. Maximum and minimum temperatures were calculated from the four selected points and the resulting temperature difference was calculated. The model for the temperature difference in the steel box girder bridge was shown by graphing the temperature difference. Compared to the temperature distribution of the Euro code, the presented temperature difference model showed a temperature difference of $0.9^{\circ}C$ at the top and of $0.3^{\circ}$ to $0.4^{\circ}C$ at the intermediate part. These results suggested that the presented model could be considered relatively similar to the Euro code The calculated standard error coefficient was 2.71 to 2.84 times the standard error and represents a range of values. The proposed temperature difference model may be used to generate basic data for calculating the temperature difference in temperature load design.