• 한국철도학회논문집
• /
• 제6권3호
• /
• pp.203-208
• /
• 2003

With designing alignment of railway for urban rail transit, a greater attention is paid to the riding safety and the comfort of the passengers. Especially, cant, transition curve, minimum curve radius are considered as very important alignment factors for the curve. For the above alignment factors, in this study, comparative studies on the design criteria of foreign rail transit are conducted. And reasonable design criteria of the alignment for urban rail transit are proposed.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.199-208
• /
• 2013

So far today, there is a speed limit by the radius of curve based on operation regulation in domestic railway, however a study for the maximum running speed at the curved section without any derailment would be necessary. The two major factors related to the running safety of railway vehicle are classified as the railway vehicle condition and the track condition. In terms of the rail inclination among many other factors, the determination of rail inclination within the possible limit is necessary for the geometrical structure of the optimum track. The disregard of the geometrical parameter related to the rail inclination may cause a serious problem to the running safety of railway vehicle. This study is focusing on the analyzing of running safety regard to the change of rail inclination among the many other parameters to improve derailment safety, so that there is an affection analysis of the running safety regard to the change of rail inclination in the ideal and geometric track condition. Also There is an affection analysis of the running safety regard to the simultaneous change of rail inclination and the running speed at the curved section. According to analysis results of running safety, In case that the left and right rail inclination are 1/40, the running safety of this condition defined than other conditions. Also, the rail inclination of conventional lines is 1/40, Therefore, the railway vehicle passing through curve is safe when the railway vehicle runs in conventional lines.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.297-302
• /
• 2003

With designing alignment of railway for urban rail transit, a greater attention is paid to the riding safety and the comfort of the passengers. Especially, cant transition curve, minimum curve radius are considered as very important alignment factors for the curve. For the above alignment factors, in this study, comparative studies on the design criteria of foreign rail transit are conducted. And reasonable design criteria of the alignment for urban rail transit are proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.585-588
• /
• 2004

In this study, Curve dependent wheel flange lubricator with grease spray type is investigated and estimated a point of view reducing wheel flange wear and noise in the curve through field test on korean rail. Advantage of curve dependent wheel flange lubricator with grease spray type is found on the basis of the result of field test in comparison with oil spray type lubricator and wheel without wheel flange lubricator on railroad in Korea.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.572-577
• /
• 2011

Curve squealing of inter-city railway vehicle is a noise with high acoustic pressure and rather narrow frequency spectra. This noise turns out to be very annoying for the people living in the neighborhood of locations and the passenger in railway vehicle where this phenomenon occurs. Squealing is caused by a self-exited stick-slip oscillation in the wheel-rail contact. Curve squeal noise of railway vehicles that passed by a factor of the speed limit, so to overcome in order to improve running performance is one of the largest technology. In the present paper, characteristic of squeal noise behavior at the Hanvit-200 tilting train test-site. Curve squealing of railway wheels/rail contact occurs in R400~ R800 curves with a frequency range of about 4~11 kHz. If the curve is less than the radius of wheel frail contact due to |left-right| noise level difference (dBA) shows a significant effect of squeal noise were more likely.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.201-207
• /
• 2010

철도 레일의 누적통과톤수에 의한 교체주기기준은 레일의 휨 피로수명에 의해 결정된다. 레일의 휨 피로수명을 평가하기 위해서는 기본적으로 레일의 휨 피로거동(S-N선도)에 대한 분석이 필요하다. 본 연구에서는 국내에서 사용되고 있는 50kg/m, 60kg/m 레일에 대하여 신품 및 사용 용접레일(모재부, 테르밋용접부, 가스압접부)로 구분하여 실물 휨 피로시험을 수행하였으며, 휨 피로시험결과를 바탕으로 파단유형 및 파단면 분석, 파괴 확률에 따른 휨 피로거동(S-N선도) 분석을 수행하였다. 이를 통해 레일종류별, 용접방법별, 신품 및 사용레일에 대한 S-N선도를 도출하였다. 이는 향후 누적통과톤수에 의한 레일 피로수명 평가를 위해 반드시 필요한 기초 자료로서 활용될 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1283-1284
• /
• 2012

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.114-121
• /
• 1995

This paper describes a method which uses rail curves for blending surfaces. Blending surface between the free form surfaces which have the flexible shapes and are widely used today is investigated. The rail curves give blending surface continuty through Pointwise interpola- tion. It is the point in this paper that the blending surfaces give a good flexibility to modeling of base free form surfaces. Using rail curves for simple base surfaces, complicated models can be designed. Also this blending surfaces can be used for path generation in compoud surfaces.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.130-135
• /
• 2016

It is very hard to analyze the train derailment safety quantitatively at the curved section because of the diversified affect parameters including the complex interaction between wheel and rail, the train conditions such as the shape of wheel, suspension system, the track conditions such as the radius of curve, cant, transition curve, and the operation conditions, etc. Two major factors related to the running safety of railway vehicle are classified as the railway vehicle and the track condition. In this study, when the railway vehicle passing through curves of actual track condition of subway line NO.3 in seoul ($Yeonsinnae{\leftrightarrow}Gupabal$), the effect that has influence on running safety depending on rail inclination. The analysis result of 1/40 rail inclination condition is more favorable on running safety than other rail inclination conditions because derailment coefficient and wheel unloading ratio are the lowest.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1097-1106
• /
• 2007

Rail provides running tract for train and broadly and widely conveys the weight of the train exerted from the train wheels that the rail directly supports onto the cross tie and roadbed, and supports the cross-sectional pressure exerted by centrifugal force at curvatures. That is, stationary rail provides surface on which dynamic train runs and guarantees cross-sectional resistance to enable the vertical snake motion of the train wheels as well as to maintain lateral force at curvatures. Rail provides running surface on which train wheels can run smoothly, and secures vertical and lateral force. However, it undergoes continuous destructive reactions (wearing and damages) and abrasion of the cladding by the train wheels. It is obvious that wearing will result when two metal parts act against each other. However, occurrence of abnormal wearing such as rapid wearing of the rail side due to complex generation of various mechanisms at the contact surface between the rail and train wheel flange. It is not easy to simply examine the causes of occurrence of abnormal wearing of rail and train wheel flange. Although countless number of academicians and specialists are conducting researches on abnormal wearing of rail and vertical wearing of train wheels, I believe it is too early to argue on pros and cons due to insufficiency of officially verified information on the issue. This review will be focusing on the examples of repairs that reduced the generation of abnormal wearing of rail by reviewing and improving characteristics of wearing and slack, speed of the train and cant as well as status of lubricator by choosing the compound curves present in the section between the $Anguk{\sim}Jongno3-ga$ Stations of the Route No. 3 among the compound curve tracks of the Seoul Metro Routes No. 3 & 4 at which abnormal wearing is generated continuously.