• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.45-53
• /
• 2005

This study is aimed at analyzing the relationship between personal factors of radiological technologists and their job stressors. For this aim, a survey was conducted by means of 890 questionnaires from the middle of July to the end of August 2003 to the subjects of radiological technologists who are working for 44 general hospitals in 16 cities and provinces across the country. The results of the survey could be summed up as follows: 1. The biggest stressor that affects a radiological technologist personally under the working situation turned out to be position, job satisfaction and physical symptom(p<0.001), while job satisfaction and physical symptom also played an important role in personal relationship(p<0.001). 2. In terms of job conflicts, colleagues, immediate seniors, job satisfaction and physical symptoms appeared to exercise great impact(p<0.001), As for job autonomy, age, position and job satisfaction were known to be heavily influential(p<0.001). 3. With regard to job load, job satisfaction and behavioral symptom turned out to have great influence while, in job stability, position and job satisfaction seemed to be immensely influential(p<0.001). The present study has a limit in that it covers only radiological technologists who are working at the 3rd reference hospitals but excludes those who are working at the first and second reference hospitals. The findings, however, are surely believed to be able to serve as basic data to improve the medical service quality as they will help reduce the stressors of and enhance mental and physical health for radiological technologists who play important roles as teammates with expertise in the medical field. These outcomes could also be referred to in future studies in this area.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.429-435
• /
• 2017

In order to increase the therapeutic effect of radiation, there has been an increase in the use of conventional photon therapy. The intensive care unit should pay more attention to the radiation safety evaluation due to the higher energy and the larger facility compared to the existing Photon treatment. These radiation safety evaluations are mainly performed by using Monte Carlo simulation, and the first thing to be done is geometric modeling. The Heavy-ion treatment facility uses synchrotron as the accelerating device, which is difficult to precisely model geometrically and is mostly modeled briefly. This study investigated the effect of simplification and precise implementation of Dipole magnet among the components of synchrotron acceleration device on the radiation safety evaluation. The results show that the simplified geometric model is overestimated with the precisely implemented geometric model. Therefore, it is considered that the radiological safety evaluation results in more reliable results of the precise geometric modeling.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.811-817
• /
• 2020

This study aims to evaluate the Modulation Transfer Function (MTF) according to the change in the number of channels of the CT examination device by changing the posture of the patient to the X-axis and Y-axis in the wrist joint CT examination. Using a CT device and a wrist phantom, the test was performed by moving 0 (matched), 5, 10, and 15 cm in the X-axis around the isocenter, and the Z-axis was rotated by -20° and -40°. For the test, 16, -40 and 64 channels were used to check whether there was a difference for each number of channels. The examined images were compared by measuring the MTF values of the ulna and left and right sides of the radius. In the experiment where the isocenter was moved along the X-axis, the MTF value decreased with an increase in the moving distance, and the MTF value was found to be unaffected by the number of channels. In the experiment in which the wrist joint was rotated by -20° and -40° on the Z-axis, the degree of deviation and MTF were found to be irrelevant. It was not related to the number of channels either. In conclusion, the movement of the wrist along the X-axis should be restrained as much as possible for a wrist joint CT scan, whereas deviation around the Z-axis depending on the environment for the patient would not affect the MTF of the image.

• Journal of the Health Care and Life Science
• /
• v.9 no.1
• /
• pp.161-167
• /
• 2021

The present study was conducted to assess the association between serum ferritin and 25-hydroxyvitamin D [25(OH)D] and metabolic syndrome (MetS) in Korean women. The data of a total of 9,256 adults (4,196 premenopausal women and 4,340 postmenopausal women) aged ≥ 20 years from the Fifth Korean National Health and Nutrition Examination Survey (KNHANES V) (2010-2012) were analyzed. The key study results were as follows: First, in women without MetS, after adjusting for related variables (age, smoking, alcohol consumption, regular exercise, SBP, DBP, WM, TC, TGs, HDL-C, FPG, Hb, Hct, and Fe), vitamin D status was positively associated with serum ferritin levels (premenopausal, p < 0.001; postmenopausal, p = 0.027). Second, in women with MetS, after adjusting for related variables, vitamin D status was not associated with serum ferritin levels (premenopausal, p = 0.739; postmenopausal, p = 0.278). In conclusions, vitamin D status was positively associated with serum ferritin levels in women without MetS but not in women with MetS.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.333-338
• /
• 2019

In the field of radiotherapy, the Quality Assurance(QA) procedure to verify the safety of treatment is considered to be very important. However, due to various problems of the conventional dosimeters used for the QA, researches on these dosimeters have been actively carried out to replace them. In this study, to maximize the sensitivity by visible light(VL) emitted from phosphors, blended hybrid sensors were fabricated by blending various weight percent(wt%) of $Gd_2O_2S:Tb$ which is a phosphor with excellent fluorescence efficiency into $PbI_2$. Then, the electrical properties to high energy radiation from the blended sensors and the pure $PbI_2$ sensor were compared and evaluated. As a result of the sensitivity evaluation, the sensor of 3wt% showed the highest value with more than 40% difference from the other sensors, and gradual decreasing in sensitivity was observed with increasing wt% except for the sensor of 3wt%. Also, in the reproducibility evaluation, the pure $PbI_2$ sensor exhibited a large variation in coefficient of variation(CV)>0.015, while all the blended sensors showed CV<0.015.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.55-61
• /
• 2021

In this study, microbes were collected before and after disinfection using ANIOS(ANIOSURF Premium NPC) and compared the areas where the radiological technologist and the patient frequently contacted the chest X-ray. From September 1st to September 7th, 2020. in P Hospital in Deagu, 4 region were collected in a 10×10 size using a sterile cotton swab of the transport medium, and before and after disinfection results were obtained through the colorimetric method. As a result, n the X-ray tube handle Proteus mirabilis, Staphylococcus epidermidis, Bacillus spp., Candida spp., and in the Chin region Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, NTM, and in the Chest region Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, and in the Palm region NTM, Candida spp. were detected, and 103 CFU(Colony Forming Unit) or more were measured. After disinfection, only X-ray tube handle was detect Bacillus spp. and more than 102 CFU was measured. Microorganisms found prior to disinfection can cause opportunistic infections, Experimental results showed that Aniosulf(0.25%) is more economical and disinfectant than ethanol(70-90%) and isopropyl alcohol(70-90%). However, further research is needed on the detection of Bacillus spp. resultingly this research is useful basic data of infection control in Radiography room and prevention secondary infections.

• Journal of the Korean Society of Radiology
• /
• v.18 no.5
• /
• pp.463-471
• /
• 2024

Through this study, the purpose of this study is to harmonize the quality assurance system of diagnostic radiation generator inspection bodies with current international standards, standardize the diversity of inspection bodies, provide consistent inspection services to medical institutions, and improve review efficiency of regulatory agencies. We compared and reviewed the quality assurance systems of all domestic diagnostic radiation generator and defense facility inspection bodies. For international harmonization, we reviewed international and domestic and international standards, including ISO/IEC 17020, and added and reflected the requirements of regulatory agencies. The quality assurance systems of all inspection bodies included all required items in compliance with ISO/IEC 17020, but some of the quality procedures showed differences. Standards were drawn up through expert meetings for items where differences were compared and analyzed, and rules for safety management of diagnostic radiation generators and amendments to these regulations were proposed. The results of this study are expected to improve the operational efficiency of inspection bodies and the work efficiency of regulatory agencies for inspection bodies, and international harmonization in accordance with international standards such as ISO/IEC 17020 should be continuously maintained.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.167-172
• /
• 2006

Catheter fragment and embolism are both potentially serious complications associated with the use of an intravenous (IV) catheter for contrast media bolus injection, and may be followed by serious or lethal sequelae. Though catheter fragment is a rare complication of IV catheter insertion, especially in peripheral veins, CT can be used to detect residual fragment. This study demonstrates the utility of MDCT to localize a small, subtle peripheral venous catheter, which can be easily reformatted of MDCT reformations. Various 3D techniques such as MPR and MIP, volume rendering, and shaded-surface displays are currently available for reconstructing MDCT data. Advances in MDCT technology contribute substantially to the detection and accurate localization of smaller IV catheter fragment.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.69-77
• /
• 2009

This study gives an account of the collateral standards in IEC 60601-1-3: 2008 specifying the general requirements for basic safety and essential performance of diagnostic X-ray equipment regarding radiation protection as it pertains to the production of X-rays. The collateral standards establish general requirements for safety regarding ionization radiation in diagnostic radiation systems and describe a verifiable evaluation method of suitable requirements regarding control over the lowest possible dose equivalent for patients, radiologic technologists, and others. The particular standards for each equipment can be determined by the general requirements in the collateral standard and the particular standard is followed in the risk management file. The guidelines for radiation safety of diagnostic radiation systems is written up in ISO 13485, ISO 14971, IEC 60601-1-3(2002)1st edition, medical electric equipment part 1-3, and the general requirements for safety-collateral standards: programmable electrical medical systems. Therefore the diagnostic radiation system protects citizens' health rights with the establishment and revisions of laws and standards for diagnostic radiation systems as a background for the general requirements of radiation safe guards applies, as an international trend, standards regarding the medical radiation safety management. The diagnostic radiation system will also assure competitive power through a conforming evaluation unifying the differing standards, technical specifications, and recognized processes.

• Imaging Science in Dentistry
• /
• v.41 no.4
• /
• pp.155-159
• /
• 2011

Purpose : This study was performed to determine the prevalence of maxillary canine impaction on a basis of a single panoramic radiograph in Bangladeshi population. Materials and Methods : A random sample of seven hundred panoramic radiographs was collected from the patient record of a dental clinic. All the selected panoramic radiographs were taken from January 2009 to August 2010 by a single panoramic radiograph machine with the same exposure time (19 seconds) for all radiographs. One hundred and twenty panoramic radiographs were excluded to minimize the selection bias. In a dim lit room, an observer assessed the radiographs on a standard radiographic light box. The position of the impacted maxillary canine was recorded in line with the longitudinal axis of a tooth using the edge of a metal ruler. Data were subsequently put on SPSS 11.5 software and chi-square (${\chi}^2$) tests were applied to find out the association. Results : Among 580 panoramic radiographs it was found that impacted maxillary canines were present in only 7 (1.2%) radiographs. A statistical significant difference was found between the age of the patients and the vertical position of the impacted canines (p=0.000) and between the age of the patients and the horizontal position of the impacted canines (p=0.003). Conclusion : The prevalence was found to be low compared with the present study from the limitation of panoramic image. Further study needs to include three-dimensional imaging modality.