• Imaging Science in Dentistry
• /
• v.38 no.1
• /
• pp.23-27
• /
• 2008

Purpose: The aim of this study was to evaluate the change in the position of the mandibular condyle within articular fossa by a CBCT after wearing complete denture (CD). Materials and Methods: CBCT of 34 temporomandibular joints were taken from 9 male and 8 female patients with CB $Mercuray^{TM}$ (Hitachi, Japan) before and after wearing a CD for rehabilitation. Position of mandibular condyle within articular fossa at centric occlusion was evaluated with $Vimplant2.0^{TM}$ (CyberMed, Korea) on the central parasagittal view and curved panoramic coronal view of the condylar head. A statistical evaluation was done with SPSS. Results: The range of anteroposterior positional rate (AP) of condylar head within articular fossa was -16-5 and -10-12 respectively on the right and left sides. Before wearing CD, the AP rate showed discrepancy between right and left sides (p<0.05). After wearing CD, both condyles showed a tendency to decrease in posterior condylar position (right side; p<0.05). The average discrepancy between right and left side in mediolateral positional rate (MD) was 15.5 and 4.5 respectively before and after wearing CD. The improvement was observed in mediolateral relationship of both condylar heads after wearing CD (p< 0.01). Before wearing CD, the average horizontal angle of long axis of condylar head was $79.6{\pm}2.7^{\circ}\;and\;80.1{\pm}5.7^{\circ}$ respectively on the right and left sides. After wearing CD, both condyles were rotated in the same direction in average on axial plane. Conclusion: We observed with CBCT the significant clinical evidence in case of positional change of mandibular condyle after wearing complete denture.

• Imaging Science in Dentistry
• /
• v.38 no.1
• /
• pp.17-22
• /
• 2008

Purpose: It is important to determine the bucco-lingual inclination of implants on radiographs before the implant surgery. The purpose of this study was to compare the buccolingual inclination in alveolar bone and the tooth with dental cone beam CT and to prepare the standard for the buccolingual inclination of implant. Materials and Methods: Axial, panoramic, and buccolingually sectioned images of 80 implant cases with stent including straight marker using CB $Mercuray^{TM}$ (Hitachi, Japan) were evaluated. The comparison of the buccolingual inclination of remained alveolar bone with the tooth and the marker on butcolingually sectioned views was performed statistically. Results: The average buccolingual inclination of remained alveolar bone and tooth was $82.8{\pm}4.6^{\circ}\;and\;85.8{\pm}4.7^{\circ}$ (p<0.05, r=0.96) at the 1st molar area and $76.4{\pm}1.7^{\circ}\;and\;82.7{\pm}1.7^{\circ}$ respectively (p>0.05, r=0.12) at the 2nd premolar area in upper jaw. The average buccolingua1 inclination of remained alveolar bone and tooth was $81.3{\pm}8.3^{\circ}\;and\;87.5{\pm}6.3^{\circ}$ (p>0.05, r=0.85) at the lower 2nd premolar area and $94.3{\pm}6.6^{\circ}\;and\;93.3{\pm}7.2^{\circ}$ respectively (p>0.05, r=0.91) at the 1st molar area in lower jaw. The inclinations of markers were very different from those of remained bone at the most of areas except the upper 2nd premolar area (r=0.79). Conclusion: We recommend dental CBCT analysis for determining the buccolingual inclination of dental implant, because of significant difference, in average, between the bucco1ingual inclination of remained alveolar bone and tooth.

• Journal of radiological science and technology
• /
• v.42 no.2
• /
• pp.137-143
• /
• 2019

The aim of this study was analyzed the setup error of breast cancer patients in intensity modulated radiation therapy(IMRT) with deep inspiration breath holding(DIBH) and was analyzed the dose distribution due to setup error. A total of 45 breast cancer cases were performed a retrospective clinical analysis of setup error. In addition, the re-treatment planning was carried by shifting the setup error from the isocenter at the treatment. Based on this, the dose distribution of PTV and OARs was compared and analyzed. The 3D error for small breast group and medium breast group and large breast group were 3.1 mm and 3.7 mm and 4.1 mm, respectively. The difference between the groups was statistically significant(P=0.003). DVH results showed HI, CI for the PTV difference between standard treatment plan and re-treatment plan of 14.4%, 4%. The difference in $D_5$ and $V_{20}$ of the ipsilateral lung was 5.6%, 13% respectively. The difference in $D_5$ and $V_5$ of the heart of right breast cancer patients was 6.8%, 8% respectively. The difference in $D_5$, $V_{20}$ of the heart of left breast cancer patients was 7.2%, 23.5% respectively. In this study, there was a significant association between breast size and significant setup error in breast cancer patients with DIBH. In addition, it was found that the dose distribution of the PTV and OARs varied according to the setup error.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.335-344
• /
• 2023

Purpose: This bibliometric analysis aimed to provide a comprehensive overview of the characteristics, trends, and level of diagnostic efficacy of studies on cone-beam computed tomography (CBCT) published in Imaging Science in Dentistry (ISD) from 2011 to 2022. Materials and Methods: Publications related to CBCT identified in the electronic collection of ISD were selected according to eligibility criteria by 2 independent reviewers who collected data on the characteristics of the articles (year, authors, and country). The type and topic of studies were analyzed using VOSviewer v.1.6.18 (Centre for Science and Technology Studies, Leiden University, Leiden, Netherlands). The research articles were classified according to the hierarchical scale of diagnostic efficacy. Results: Of the 236 articles included, most were from South Korea and Brazil. Bong-Hae Cho and Yun-Hoa Jung were the most prolific authors on the topic of CBCT. The most frequently published types of studies were cross-sectional and laboratory-based. The most popular topics WERE related to the diagnosis of pathologies and/or alterations, as well as anatomical variations. On the diagnostic efficacy scale, most studies were rated level 1 (technical efficacy) or 2 (diagnostic accuracy efficacy). Conclusion: A steady increase was observed in publications related to CBCT, which are of both clinical and academic interest. The trends in these publications were analyzed, revealing that most are cross-sectional studies primarily exploring the capabilities of CBCT in diagnosing pathologies and/or changes in the oral and maxillofacial complex. These studies were typically classified as level 1 or 2 on the diagnostic efficacy scale.

• Imaging Science in Dentistry
• /
• v.49 no.1
• /
• pp.35-43
• /
• 2019

Purpose: The goal of this study was to assess the accuracy and reliability of a low-cost portable scanner (Scanify) for imaging facial casts compared to a previously validated portable digital stereophotogrammetry device (Vectra H1). This in vitro study was performed using 2 facial casts obtained by recording impressions of the authors, at King's College London Academic Centre of Reconstructive Science. Materials and Methods: The casts were marked with anthropometric landmarks, then digitised using Scanify and Vectra H1. Computed tomography (CT) scans of the same casts were performed to verify the validation of Vectra H1. The 3-dimensional (3D) images acquired with each device were compared using linear measurements and 3D surface analysis software. Results: Overall, 91% of the linear Scanify measurements were within 1 mm of the corresponding reference values. The mean overall surface difference between the Scanify and Vectra images was <0.3mm. Significant differences were detected in depth measurements. Merging multiple Scanify images produced significantly greater registration error. Conclusion: Scanify is a very low-cost device that could have clinical applications for facial imaging if imaging errors could be corrected by a future software update or hardware revision.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.277-282
• /
• 2011

When we keep sitting for a long time, we end up with pain due to changes in the curvature in the waist. This study examined impacts from the wearing of a SPINE-GUARD(belt for the waist stabilization) on a cross-legged sit on variations of the Cobb's angle, lower back pain and trunk flexion angle. 15 men for the examination have watched movies or attended lectures while wearing a belt for 90 minutes per round for every five rounds for two weeks. The Cobb's angle showed a significant decrease from $48.36{\pm}14.57$ before wearing to $28.09{\pm}11.63$ after wearing (p<0.05). Pain decreased from $4.53{\pm}2.36$ before wearing to $2.733{\pm}2.153$ after wearing (p<0.05). The trunk flexion angle also showed a significant decrease from $82.33{\pm}20.30$ before wearing to $70.2{\pm}19.43$ after wearing (p<0.05). Given these findings, the wearing of a SPINE-GUARD seems to affect variations of the Cobb's angle and trunk flexion angle, and decrease of lower back pain.

• Journal of radiological science and technology
• /
• v.34 no.3
• /
• pp.183-188
• /
• 2011

We studied the optimal location where the radiation dose of radiological technologists is minimally measured. The measured scatter dose has been compared with the distance inverse square law. We measured the primary X-ray with different tube conditions (60, 70, 81 and 90 kVp) and distances (60, 120 and 180 cm). The scatter ray has been measured with various locations (42.5, 52.4 and 62.4 cm for front and back side, 0 to 60 cm with 10 cm interval for left and right side). The results of this study showed that the dose of primary X-ray was attenuated to 20.52 (27.20%), 28.58 (25.20%), 38.82 (26.32%) and 48.20 mR (26.27%) for each tube voltages at 120 cm. In addition, The dose were 7.06 (8.91%), 9.90 (8.73%), 13.64 (9.25%) and 16.60 mR (9.05%) at 180 cm. As for the scatter in front and back side, the attenuated dose were 0.15 mR (23.09%) and 0.15 mR (22.08%) at 120 cm, and 0.07 mR (10.43%) and 0.06 mR (8.83%) at 180 cm. Scatter was decreased in third quadrant. Therefore, it is recommended that radiological technologists should keep long distance from the object.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.31-37
• /
• 2015

The cases of radiographic inspection for medical diagnosis in Korea have been continuously increasing year after year, which pays particularly more attention to CT which occupies over the half of medical radiation exposure. To find an effective alternative for reducing radiation exposure, the researchers conducted comparative experiments using some shields made of bismuth, aluminum 6mm, and silicone 22mm. These shielding materials have been used to reduce the entrance surface dose (ESD) on lenses, maintaining the CT number, noise, and uniformity in brain CT scanning which forms the largest part in CT scanning these days. These experiments showed that the doses in the spiral scan parallel to IOML and the conventional scan in Bismuth were 26.41% and 17.52%, respectively; in Aluminum 18.24% and 9.39%; in Silicone 19.47% and 14.39% lower than compared with those in the cases without any shields. In the items of the CT number, noise, and uniformity, the bismuth shield satisfied exceedingly the standards of the phantom image test while aluminum and silicone were within. To keep the graphic quality and get good shielding effect, we recommend the silicone shield which can be manufactured and purchased with ease.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.351-357
• /
• 2018

During radiation therapy, the patient is exposed to secondary radiation by scattered and leakage radiation. For the diagnostic radiation, guidelines for reducing the patient's exposure as the diagnostic reference level are provided. However, in the case of therapeutic radiation, even though the radiation dose by the secondary radiation is considerable, the prescription dose is not limited because of the reason of the therapeutic efficiency. The purpose of this study was to evaluate the secondary radiation that the patient could be received at the peripheral tissue during the radiotherapy using the linear accelerator with the radiophotoluminescent glass dosimeter. In addition, we measured the degree of saturation of the luminescent amount according to the build-up characteristic of the radiophotoluminescent glass dosimeter. As a result of carrying out this study, the exposure dose decreased drastically farther away from the treatment field. When the head was irradiated with 1 Gy, the neck could be exposed to 18.45 mGy. When the same dose was irradiated at the neck, 15.55 mGy of the head and irradiated at the chest, 14.26 mGy of the neck and irradiated at the pelvis, 1.14 mGy of the chest were exposed separately. The degree of saturation of the luminescent intensity could be overestimated by 1.8 ~ 4.8% depending on time interval for 3 days.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.61-67
• /
• 2009

Purpose : The purpose of this study was to investigate the applicability of poly-L-guluronic alginate (PGA) gel in vascular embolization with angiography simulation. Materials and Methods : To prepare a gel-forming PGA from no guluronate-rich Laminaria japonica, a new acid hydrolysis method was employed with a lower HCL concentration (0.03 M) and a shorter treatment time (5 min). The obtained PGAs were selected based on gel stability and viscosity. Glass aneurysm model was used to simulate gel embolization in vitro. Then, finally, the PGA was used to embolize the renal vascular system by using a rabbit model and angiography. Results : Glass aneurysm model was made to simulate gel embolization procedure. PGA solution was injected from pump through 2-way catheter. Subsequent injection of $CaCl_2$ successfully formed gels inside aneurysm model that conforming to its inner contour. In rabbit model, first, renal artery and aorta leading to the right kidney were ligated to block blood flow, then conventional contrast agent was injected through aorta to check the arterial patency to the left kidney. In sequential artery injection method, PGA and $CaCl_2$ were injected through renal artery sequentially via a single catheter. Re-injection of contrast agent after removing ligated aorta showed blood flow to the right kidney but no flow in the left kidney. This result demonstrated a complete blocking of blood flow due to gel formation in vascular bed of the left kidney. Conclusion : Instillation of calcium alginate into aneurysm model and arterial system in vivo produced an embolization that better fills and conforms to the contour of aneurysms or blocking vascular bed completely. Therefore, PGA was effective endovascular occlusion materials and provide an efficiency of vascular angiography.