• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.421-433
• /
• 2023

This study was to examine the developmental dental abnormalities in childhood cancer survivors. Risk factors were assessed for 125 children with radiographic data through a retrospective analysis of medical records and panoramic images. 68.0% of childhood cancer survivors exhibited at least one dental abnormality. The types of abnormalities varied depending on the age at cancer diagnosis and treatment intensity, ranging from microdontia (43.2%), to abnormal root development (39.2%) and tooth agenesis (33.6%). Logistic regression analysis demonstrated that a young age at diagnosis (under 3 years), the use of heavy metal agents, a history of hematopoietic stem cell transplantation (HSCT), and combination treatment of chemotherapy, radiation therapy, and HSCT were associated with a significantly higher risk for overall dental abnormalities. The increased risk ratios were 6.00, 3.06, 3.22, and 7.87, respectively (p < 0.05). The results of this study will predict dental abnormality in permanent dentition according to the diagnosis age and treatment method of childhood cancer.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.918-928
• /
• 1998

The present study was done with two aims. First, to evaluate the radiographic measurements of liver volumes in normal and hepatomegaly dogs induced by carbon tetrachloride. Second, to investigate quantitative tissue echo pattern by ultrasonography. Gray level histogram of the normal liver and the kidney were estimated with carbon tetra-chloride intoxication. In normal, r-square for liver volume to body weight was 0.93372, and this showed direct linear regression. Gray level histograms of the normal liver and the kidney were $19.150{\pm}2.490$(mean${\pm}$SD) and $13.175{\pm}2.686$(mean${\pm}$SD) respectively(p < 0.01). Liver parenchymal echogenicity was more hyperechogenic than kidney cortex echogenicity. Liver/Kidney ratio was $1.504{\pm}0.313$ and it can be used relative comparison of liver and kidney parenchymal echogenicity. In carbon-tetrachloride($CCl_4$) intoxication, changes of liver volume appeared to increase up to 24 hours after administration (p < 0.05), and decreased gradually to normal level after 2~5 days. Gray level histogram of liver parenchyma decreased up to 24hours (p < 0.01) after intoxication and then gradually increased to normal level. But that of kidney cortex had no significant change. Liver/Kidney ratio also decreased by 2 days(p < 0.01) and then gradually increased to normal level. On histopathologic features of hepatic tissues in carbon tetrachloride intoxication, both coagulative necrosis of hepatic cell and hemorrhage of centrilobular & midzonal area were identified. Conclusively, plain radiography is a useful diagnostic method for evaluating liver volume in mild hepatomegaly. Especially, it is considered that an adequate numerical processing of the liver length, depth and thoracic width and depth measurement would be helpful. Using gray level histogram, ultrasonographic evaluation was useful objective methods in early diagnosis of diffuse hepatic disease.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.421-431
• /
• 2002

C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.1
• /
• pp.19-27
• /
• 2020

Objectives: Pentoxifylline (PTX) is a methylxanthine derivative that has been implicated in the pathogenesis of peripheral vessel disease and intermittent lameness. The purpose of this study was to investigate the effect of PTX and tocopherol in patients diagnosed with osteoradionecrosis (ORN), bisphosphonate-related osteonecrosis of the jaw (BRONJ), and chronic osteomyelitis using digital panoramic radiographs. Materials and Methods: This study was performed in 25 patients who were prescribed PTX and tocopherol for treatment of ORN, BRONJ, and chronic osteomyelitis between January 2014 and May 2018 in Seoul National University Dental Hospital. Radiographic densities of the dental panorama were compared prior to starting PTX and tocopherol, at 3 months, and at 6 months after prescription. Radiographic densities were measured using Adobe Photoshop CS6 (Adobe System Inc., USA). Blood sample tests showing the degree of inflammation at the initial visit were considered the baseline and compared with results after 3 to 6 months. Statistical analysis was performed using the Mann-Whitney test and repeated measurement ANOVA using IBM SPSS 23.0 (IBM Corp., USA). Results: Eight patients were diagnosed with ORN, nine patients with BRONJ, and the other 8 patients with chronic osteomyelitis. Ten of the 25 patients were men, average age was 66.32±14.39 years, and average duration of medication was 151.8±80.65 days (range, 56-315 days). Statistically significant increases were observed in the changes between 3 and 6 months after prescription (P<0.05). There was no significant difference between ORN, BRONJ, and chronic osteomyelitis. Only erythrocyte sedimentation rate (ESR) was statistically significantly lower than before treatment (P<0.05) among the white blood cell (WBC), ESR, and absolute neutrophil count (ANC). Conclusion: Long-term use of PTX and tocopherol can be an auxiliary method in the treatment of ORN, BRONJ, or chronic osteomyelitis in jaw.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.485-492
• /
• 2009

The thermal fatigue crack(TFC) is one of the life-limiting mechanisms at the nuclear power plant operating conditions. In order to evaluate the structural integrity, various non-destructive test methods such as radiographic test, ultrasonic test and eddy current are used in the industrial field. However, these methods have restrictions that defect detection is possible after the crack growth. For this reason, acoustic emission testing(AET) is becoming one of powerful inspection methods, because AET has an advantage that possible to monitor the structure continuously. Generally, every mechanism that affects the integrity of the structure or equipment is a source of acoustic emission signal. Therefore the noise filtering is one of the major works to the almost AET researchers. In this study, acoustic emission signal was collected from the pipes which were in the successive thermal fatigue cycles. The data were filtered based on the results from previous experiments. Through the data analysis, the signal characteristics to distinguish the effective signal from the noises for the TFC were proven as the waveform difference. The experiment results provide preliminary information for the acoustic emission technique to the continuous monitoring of the structure failure detection.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.197-212
• /
• 2020

This study analyzed the microstructure of ring-pommel swords, excavated from Ancient Tombs, Hadae, Ulsan and examined their production technique, using non-destructive testing and a metallurgical method. The results confirmed that the five ring-pommel swords, unearthed in Ancient Tombs, Hadae, Ulsan, as identified by radiographic non-destructive testing, had been solely manufactured using iron, through forging based on the single-piece technique. Furthermore, these results were compared with previous studies, and the manufacturing techniques of single-piece ring-pommel swords were categorized into three types: pure iron - changing the shape, pure iron - changing the shape - carburization, and steel - changing the shape - quenching. The ring-pommels of four swords had around 0.7% of carbon content, which is as much as for eutectoid steel and higher than for other parts of these swords, such as the backs of their blades and handles. The weapon function of a small ring-pommel sword, under 60cm in length, was maximized by quenching focusing on its blade. Conversely, the martensite quenching structure was not observed in four ring-pommel swords shorter than 75cm. In other words, the same types of single-piece ring-pommel swords(late in 2C~early in 4C) were unearthed from Ancient Tombs, Hadae, and the group who has manufactured these swords is presumed to have limited their effectiveness, functionally depending on purposes, through an iron-making process and heat-treatment techniques.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.309-320
• /
• 1999

Medial patellar luxation in dogs is one of the most common patellar problems presented to the veterinary practitioner. It is observed in toy and miniature breed and the majority of cases is a congenital form. Because of extensor mechanism's instability, it causes deformity and disorder in the growth of the affected limb when the luxation is left without treatment As lameness is not easily detectable in puppies, early diagnosis and correction are essential for therapy. Up to now, there has not been any reports refering to the diagnostic methods and the optimal age for correction in young dogs. Thirteen 45-90 days old puppies, have grade I and/or II medial patellar luxation. Only by palpation, all 13 dogs were diagnosed of patelar luxation. Skyline radiographic view was useful to interpret patellar morphology and depth of trochlear groove only above 60 days old. However, it was difficult to make definite diagnosis patellar luxation. The caudocranial and lateral radiographic view as well as ultrasonographic skyline view were not showed of patellar luxation. 2 puppies had unilateral patellar luxation and 11 puppies had bilateral patellar luxation which more serious on the left than on the right. Only 3 puppies among 11 puppies with bilateral patellar luxation were observed of lameness degree 1. Regardless of grade of patellar luxation and lameness, we performed trochlear chondroplasty using a U-shape sculpture blade to minimize cartilage injury, transposition of tibia tuberosity with No. 1 Supramid to align extensor mechanism and lateral imbrication. After surgery, we examined the operated animal daily for 10 days and on 15, 30 and 60 days after surgery respectively. After operation, pain and fever became normal on 7 days, swelling on 10 days, respectively. On 10 days after surgery, dogs showed normal standing position, and normal walking was observed in 15 days after surgery. In force plate analysis, the operated legs were normal weight bearing at 30 days after operation. After surgery, not only patellar luxation and clinical signs have been gradually reduced but also bone growth have become normal without showing growth physeal plate injury. The survival rate of puppies over 62 days old was 100%, while 42-45 days old 37.5%. The above results suggest that optimal age for surgical correction of congenital medial patellar luxation is recommended over 60 days old. In conclusion, combination of trochlear chondroplasty, transposition of tibia tuberosity, and lateral retinacular imbrication is appropriate for over 60 days old puppies to efficiently correct patellar luxation.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.10-18
• /
• 2003

Purpose : To evaluate the role of fractlonated sterotactic radiotherapy (FSRT) in the management of benign brain tumors, we reviewed the clinical, and radiographic responses of patients treated. Methods and Materials : Between March 1995 and March 2002, 36 patients with benign brain tumors were treated by FSRT. The pathological diagnoses consisted of pituitary adenomas (12 patients), cranio-pharyngiomas (5 patients), meningiomas (10 patients), and acoustic neurinomas (9 patients). Radiotherapy doses of 25 to 35 Gy (3~6 Gy/fraction, 5~10 fractions) were prescribed to the 85~90% isodose line, depending upon the location, size and volume of the tumors. The median clinical and radiographical follow up periods were 31 (range, 2~74) and 21 (range, 4~56) months, respectively. Results : In the 35 patients that could be evaluated for their clinical response, 13 (37.1%) were considered improved, 16 (45.7%) stable and 6 (17.2%) worse. Of the 33 patients who had radiographic studies, tumor shrinkage was noted in 17 (51.5%), tumor stabilization in 13 (39.4%), and tumor progression in 3 (9.1%). Of the 17 tumor shrinkage patients, 7 (21.2%) showed a complete response. Acute radiation-induced complications occurred iin 11 (30.6%) patients. Conclusions : FSRT is considered a safe and effective treatment method for begin brain tumors, but large numbers of patients, with relatively long follow-up periods are needed to assess the exact role or effect of FSRT.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.4
• /
• pp.144-150
• /
• 2017

Purpose: To assess the clinical and radiographic results and complications of arthroscopy-assisted reduction and percutaneous fixation for patients with tongue-type Sanders type II calcaneal fractures. Materials and Methods: Between August 2014 and December 2015, 10 patients who underwent surgery using subtalar arthroscopic assisted reduction and percutaneous fixation for tongue-type Sanders type II calcaneal fractures were reviewed. The mean age was 50.8 years (36~62 years), and the mean follow-up period was 24 months (12~40 months). The clinical results were evaluated using the visual analogue scale (VAS) and American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score at the regular follow-ups, and the foot function index (FFI) at the last follow-up. The subtalar range of motion (ROM) was evaluated and compared with the uninjured limb at the last follow-up. The radiographic results were assessed using the Bohler's angle from the plain radiographs and the reduction of the posterior calcaneal facet using computed tomography (CT). The postoperative complications were assessed by a chart review. Results: The VAS and AOFAS ankle-hindfoot score improved until 12 months after surgery. The FFI was 15 (1.8~25.9) and subtalar ROM was 75.5% (60%~100%) compared to the uninjured limb at the last follow-up. The $B{\ddot{o}}hler^{\prime}s$ angle was increased significantly from $2^{\circ}$ ($-14^{\circ}{\sim}18^{\circ}$) preoperatively to $21.8^{\circ}$ ($20^{\circ}{\sim}28^{\circ}$) at the last follow-up. The reduction of the posterior facet was graded as excellent in five feet (50.0%) and good in five (50.0%) on CT obtained at 12 months after surgery. One foot (10.0%) had subfibular pain due to a prominent screw head. One foot (10.0%) had pain due to a longitudinal tear of the peroneal tendon that occurred during screw insertion. Conclusion: Subtalar arthroscopic-assisted reduction of the posterior calcaneal facet of the subtalar joint and percutaneous fixation is a useful surgical method for tongue-type Sanders type II calcaneal fractures.