• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.35-40
• /
• 1994

비파괴검사(NDT)란 시험품에 손상을 주지 않고 내.외부에 존재하는 불연속부(결함)을 찾아내는 방법으로 다음과 같이 그 종류를 분류할 수 있다. (1) 표면결함 검출을 위한 비파괴검사 - 육안검사(VT) : 확대경 등에 의한 치수, 형상확인 - 자분탐상검사(MT) : 강자성체에 적용, 표면(하) 결함검출 - 침투탐상검사(PT) : 금속, 비철금속에 적용, 표면개구 결함검출 - 와류탐상검사(ET) : 도체 표층부(봉, 관 등) (2) 내부결함 검출을 위한 비파괴검사 - 방사선 투과검사(RT) : 결함의 종류, 형상의 판별 우수 - 초음파 탐상검사(UT) : 균열 등 면상 결함검출 등 우수 (3) 기타 비파괴검사 - Strain 측정 : 안전성 평가 - 음향방출시험(AET) - 누설시험(LT) - 중성자 방사선시험(NRT) 이상에서 보는 바와 같이 여러 종류의 비파괴검사가 있으나, 그 중에서 용접부에 적용되는 가장 일반적인 검사방법인 방사선 투과검사에 대해 기술하고자 한다.

• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.138-141
• /
• 2003

First case, a one-year-old female Shih Tzu weighing 3 kg with closed transverse fractures of bilateral mandibular body between 2nd and 3rd premolar teeth were treated surgically with bone plates and screws, and cranial luxation of temporomandibular joints were reduced to closed method. Second case, a 8.4 years old male Yorkshire terrier weighing 2.6 kg with closed transverse/oblique fractures of bilateral mandibular body between premolar and molar teeth were treated surgically with bone plates and screws. Radiographic examination revealed that the fractures in two cases fixed well and temporomandibular joint was stabilized. One month after operation, jaw activity was excellent and malocclusion wasn't observed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.319-323
• /
• 1991

This is a case report and review of literature that deal with a surgical correction of mandibular deficiency. Patient, 38 years old male, had visited to treat mandibular deficiency. On the basis of clinical and radiographic examination, he was diagnosed as a micrognathia. Surgical method. 1. Intraoral Bilateral sagittal split osteotomy 2. Augmentation of genioplasty - double step. Patient was satisfied with final esthetics by gnathosurgery.

• Journal of Veterinary Clinics
• /
• v.35 no.1
• /
• pp.22-25
• /
• 2018

A 7-year-old, 453 kg, thoroughbred-cross mare showed depression, severe nasal bleeding, diffuse swelling, and distortion of the facial contour. Physical and radiographic examinations revealed an open nasal bone fracture. Surgery was conducted under sedation with the horse in a standing position. Two holes were drilled directly above and below the fracture line. The nasal bone was raised to the normal position by inserting a periosteal elevator through the holes. Orthopedic wire was used to secure the fractured nasal bones through the holes. The horse recovered from sedation without complication. Sutures were removed three weeks after surgery. The nasal bone fracture appeared well-recovered morphologically and the recovery was confirmed by radiography. A wire fixation method is recommended to treat nasal bone fracture in a horse.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.34-42
• /
• 2007

Ultrasonic inspection method is more profitable than X-ray radiographic inspection in cost and effect of defect detection such as debond, damage, and it doesn't need special constructions. The method can also be a possible real time inspection with safety. This report explains 1)the experiment and analysis of ultrasonic property of solid propellant, 2)the inspection methods of propellant/liner debond by inside or outside inspection, and 3)the inspection methods of propellant microcrack by damage. From the results, it is possible to detect the defect of propellant/liner debond by inside or outside inspection. Futhermore, it can be possible to detect the propellant microcrack caused by damage using the ultrasonic attenuation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.48-53
• /
• 2016

An EMAT can be used to reliably detect defects as it serves as a non-contact transducer with the ability to transmit ultrasonic waves into specimens without couplant. Moreover, an EMAT can easily generate desired waves by altering the design of the coil and magnet. This study proposes an SH-EMAT to evaluate the integrity of the TIG welding part. A stainless steel was welded using the TIG welding method. The welding current was varied to create artificial defects. Both the PA-UT and the RT were applied to verify the defect size. The experimental results generated by using the EMAT were compared with those methods. The amplitude was observed to decrease with an increase in the defect size. These results confirmed that the presence of defects can be reliably detected by attenuation of signal amplitude. The results demonstrated that the proposed method is suitable for evaluating the integrity of TIG welding.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.366-375
• /
• 2001

Bone shaving for surgical correction is general method in facial asymmetrical patient with fibrous dysplasia. Therefore, decision of bone shaving amount on the preoperative planning is very difficult for improvement of ideal occlusal relationship and harmonious face. Preoperative planning of facial asymmetry with fibrous dysplasia is generally confirmed by the simulation surgery based on evaluation of clinical examination, radiographic analysis and analysis of facial study model. However, the accurate postoperative results can not be predicted by this method. By using the computed tomography based RP(rapid prototyping) model, simulation of facial skeleton can be duplicated and 3-dimensional simmulation surgery can be perfomed. After fabrication of postoperative study model by preoperactive bone shaving, preoperative and postoperactive surgical index was made by omnivaccum and clear acrylic resin. Amount of bone shaving is confirmed by superimposition of surgical index at the operation. We performed the surgical correction of facial asymmetry patients with fibrous dysplasia using surgical index and prototyping model and obtained the favorable results.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1597-1601
• /
• 2020

Background: Non-destructive evaluation of defects in metals or composites specimens is a regular method in radiographic imaging. The maintenance examination of metallic structures is a relatively difficult effort that requires robust techniques for use in industrial environments. Methods: In this research, iron plate, lead marker and tungsten defect with a 0.1 cm radius in spherical shape were separately simulated by MCNP code and SuperMC software. By ¹⁹²Ir radiation source, two exposures were considered to determine the depth of the actual defined defect in the software. Also by the code, displacement shift of the defect were computed derived from changing the source location along the x- or y-axis. Results: The computed defect depth was identified 0.71 cm in comparison to the actual one with accuracy of 13%. Meanwhile, the defect position was recognized by disorder and reduction in obtained gamma flux. The flux amount along the x-axis was approximately 0.5E+11 units greater than the y-axis. Conclusion: This study provides a method for detecting the depth and position of the defect in a particular sample by combining code and software simulators.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.4
• /
• pp.412-420
• /
• 1991

Seventeen rigid screw fixation and sixteen nonrigid wire fixation cases of mandibular sagittal slit ramus osteotomy were selected to compare postoperative dental and skeletal changes. A constructed horizontal plane was drawn seven degrees under sella-nasion plane and detailed cephalometirc assessment was applied to serial radiographic films taken before surgery($T_0$), immediately after surgery($T_1$), and at least six months after surgery($T_2$). Linear and angular positional changes were measured and analyzed statistically using paired t-test method and percent of positional changes(amount of post-op change/amount of intra-op change)${\times}100$. The results were as follows; 1. It was 29.4% in rigid fixation cases and 37.5% in nonrigid fixation cases comparing the postoperative positional change of more than 2mm at point B. So rigid fixation method was slightly more stable. 2. In nonrigid fixation cases, the positional change might be caused by incomplete bony union at the osteotomy site and soft tissue tension acting on this site. 3. In rigid fixation cases, the positional change might be caused by interaction between relapse tendency of protracted condyle-proximal segment and neighboring soft tissue tension.

• Journal of the Korean Society of Radiology
• /
• v.2 no.4
• /
• pp.41-46
• /
• 2008

Computed tomography (CT) is a medical imaging method employing tomography. CT is a 3-Dimensional (3-D) radiographic imaging technique, which is not suited for assessment of inflammation, but can be considered a reference method for assessment of bone damage, due to its direct 3-D visualization of calcified tissue. In this study of pathological joint changes in a rat model of adjuvant-induced arthritis (AIA) and quality analysis of bone destructions were performed by 3-Dimensional computed tomography images. These data demonstrate that the destructive progression of disease in a rat AIA model can be quantified using 3-D CT image analysis, which allows assessment of arthritic disease status and efficacy of experimental therapeutic agents.