• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.49-55
• /
• 2005

Unconditional clearance levels were derived for fifteen short-lived radionuclides. Due to the uncertainty of long-term radiological impact analysis, alpha emitting nuclides and nuclides with half-lives longer than 30 years (except for C-14) were excluded from the scope of this study. The candidate waste streams are solid wastes and waste oil generated from nuclear power reactors. The clearance levels were derived by generic assessment for enveloping scenarios, along with specific assessment for each detailed scenario such as landfill, incineration and recycling. The derived values lie in the range from 0.01 to 100 Bq/g.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.632-635
• /
• 2003

For the disposal of low-level radwaste from nuclear power plant need the determination of levels of radio nuclides in radwaste. These nuclides include the difficult-to-measure nuclides, so indirect methodology for the determination of the difficult-to-measure nuclides have to be developed. In this work, for the determination of $^129I(t_{1/2}=1.57{\times}10^7 years)$ in low-level radwaste from nuclear power plant is investigated. Recovery of Iodide in simulated waste($UO_2$ pellet) as a soluble and radwaste(resin, woolen fabric)as a insoluble samples are measured. After pretreatment of sample, $I_2$ are extracted from aqueous solution with $CCl_4$. Then I are extracted from $CCl_4$ with 0.1M $NaHSO_3$ aqueous solution. iodide in aqueous solution are determined by ion chromatography. The overall recovery yield is 76.7 (RSD 1.7%) for mixed-acid digestion method. Incase of woolen fabrics, overall recovery yield is 74.3 (RSD 2.2%) and recovery of iodide in resin 56.5(RSD 5.6%) for alkaline fusion method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.35-40
• /
• 2004

Final disposal of radioactive waste generated from Nuclear Power Plant (NPP) requires the detailed information about the characteristics and the quantities of radionuclides in waste package. Most of these radionuclides are difficult to measure and expensive to assay. Thus it is suggested to the indirect method by which the concentration of the Difficult-to-Measure (DTM) nuclide is estimated using the correlations of concentration - it is called the scaling factor - between Easy-to-Measure (Key) nuclides and DTM nuclides with the measured concentration of the Key nuclide. In general, the scaling factor is determined by the log mean average (LMA) method and the regression method. However, these methods are inadequate to apply to fission product nuclides and some activation product nuclides such as 14$^{C}$ and 90$^{Sr}$ . In this study, the artificial neural network (ANN) method is suggested to improve the conventional SF determination methods - the LMA method and the regression method. The root mean squared errors (RMSE) of the ANN models are compared with those of the conventional SF determination models for 14$^{C}$ and 90$^{Sr}$ in two parts divided by a training part and a validation part. The SF determination models are arranged in the order of RMSEs as the following order: ANN model

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.05a
• /
• pp.285-286
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.401-402
• /
• 2019

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.171-183
• /
• 2022

The parent and daughter nuclides in a radioactive decay chain arrive at secular equilibrium once they have a large half-life difference. The characteristics of this equilibrium state can be used to estimate the production time of nuclear materials. In this study, a mathematical model and algorithm that can be applied to radio-chronometry using the radioactive equilibrium relationship were investigated, reviewed, and implemented. A Bateman equation that can analyze the decay of radioactive materials over time was used for the mathematical model. To obtain a differential-based solution of the Bateman equation, an algebraic numerical solution approach and two different matrix exponential functions (Moral and Levy) were implemented. The obtained result was compared with those of commonly used algorithms, such as the Chebyshev rational approximation method and WISE Uranium. The experimental analysis confirmed the similarity of the results. However, the Moral method led to an increasing calculation uncertainty once there was a branching decay, so this aspect must be improved. The time period corresponding to the production of nuclear materials or nuclear activity can be estimated using the proposed algorithm when uranium or its daughter nuclides are included in the target materials for nuclear forensics.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1206-1212
• /
• 2022

Cold-crucible induction melting (CCIM) technology has been intensively studied as an advanced vitrification process for the immobilization of highly radioactive waste. This technology uses high-frequency induction to melt a glass matrix and waste, while the outer surface of the crucible is water-cooled, resulting in the formation of a frozen glass layer (skull). In this study, for the fabrication of borosilicate glass waste form, CCIM operation test with 60 kg of glass per batch was conducted using surrogate wastes composed of Cs, Sr, and Nd as a representative of highly radioactive nuclides generated during spent nuclear fuel management. A 60 kg-scale glass waste form was successfully fabricated through melting and draining processes using a CCIM system, and its physicochemical properties were analyzed. In particular, to enhance the controllability and reliability of the draining process, an air-cooling drain control method that can control draining through air-cooling near drain holes was developed, and its validity for draining control was verified. The method can offer controllability on various draining processes, such as molten salt or molten metal draining processes, and can be applied to a process requiring high throughput draining.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.407-408
• /
• 2009

In this work, a quantitative method of the sequential separation of $^{90}Pu,\;^{90}Sr$ and $^{241}Am$ nuclides was developed in environmental soil samples using by an anion exchange resin connected with a Sr Spec resin. The sequential methods of Pu, $^{90}Sr$ and $^{241}Am$ nuclides can reduce analysis cost and time. With the sequential methodupdated in this study, the activity concentrations of $^{239,240}Pu,\;^{90}Sr$ and $^{241}Am$ in the IAEA reference materials were close to the reference values reported by the IAEA.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1019-1030
• /
• 2017

Diffusion is a crucial mechanism that regulates the migration of radioactive nuclides. In this study, an innovative numerical method was developed to simultaneously calculate the diffusion coefficient of both parent and, afterward, series daughter nuclides in a sequentially reactive through-diffusion model. Two constructed scenarios, a serial reaction (RN_1 ${\rightarrow}$ RN_2 ${\rightarrow}$ RN_3) and a parallel reaction (RN_1 ${\rightarrow}$ RN_2A + RN_2B), were proposed and calculated for verification. First, the accuracy of the proposed three-member reaction equations was validated using several default numerical experiments. Second, by applying the validated numerical experimental concentration variation data, the as-determined diffusion coefficient of the product nuclide was observed to be identical to the default data. The results demonstrate the validity of the proposed method. The significance of the proposed numerical method will be particularly powerful in determining the diffusion coefficients of systems with extremely thin specimens, long periods of diffusion time, and parent nuclides with fast decay constants.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.738-745
• /
• 2019

Coprecipitation using hydrous ferric oxide (HFO) has been effectively used for the removal of radionuclides from radioactive wastewater. This work studied the dynamic behavior of HFO floc formation during the neutralization of acidic ferric iron in the presence of several radionuclides by using a photometric dispersion analyzer (PDA). Then the coagulation-flocculation system using HFO-anionic poly acrylamide (PAM) composite floc system was evaluated and compared in seawater and distilled water to find the effective condition to remove the target nuclides (Co-60, Mn-54, Sb-125, and Ru-106) present in wastewater generated in the severe accident of nuclear power plant like Fukushima Daiichi case. A ferric iron dosage of 10 ppm for the formation of HFO was suitable in terms of fast formation of HFO flocs without induction time, and maximum total removal yield of radioactivity from the wastewater. The settling time of HFO flocs was reduced by changing them to HFO-PAM composite floc. The optimal dosage of anionic PAM for HFO-anionic PAM floc system was approximately 1-10 ppm. The total removal yield of Mn-54, Co-60, Sb-125, Ru-106 radionuclides by the HFO-anionic PAM coagulation-flocculation system was higher in distilled water than in seawater and was more than 99%.