• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.340-350
• /
• 2016

The performance of large-scale cognitive radio (CR) networks with secondary users sustained by opportunistically harvesting radio-frequency (RF) energy from nearby primary transmissions is investigated. Using an advanced RF energy harvester, a secondary user is assumed to be able to collect ambient primary RF energy as long as it lies inside the harvesting zone of an active primary transmitter (PT). A variable power (VP) transmission mode is proposed, and an energy-based opportunistic spectrum access (OSA) strategy is considered, under which a secondary transmitter (ST) is allowed to transmit only if its harvested energy is larger than a predefined transmission threshold and it is outside the guard zones of all active PTs. The transmission probability of the STs is derived. The outage probabilities and the throughputs of the primary and the secondary networks, respectively, are characterized. Compared with prior work, the throughput can be increased by as much as 29%. The energy-based OSA strategy can be generally applied to a non-CR setup, where distributed power beacons (PBs) are deployed to power coexisting wireless signal transmitters (WSTs) in a wireless powered sensor network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.211-218
• /
• 2020

The radio wave propagation characteristics of the transmitter and receiver position change in the indoor environment were predicted through simulation, then the results obtained through the transmission loss measurement were compared and analyzed with the simulation results. The conference room was chosen as the environment for measuring transmission loss, and the radio transmission characteristics of the two environments were compared by selecting the exhibition hall without interior decorations and fixtures. In each indoor environment, the position of the transmitter chose two cases. One located in the center of the front wall and the other in the center of the side wall, and the position of the receiver moved along the centerline of the conference room and the side wall, measuring the receiving power. For each change in transmitter-receiver position, received power of 3GHz and 6GHz band were measured and compared with the simulation forecast results. The changes in received power at each receiving point were analyzed according to the location of the transmitter and the frequency band variation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.729-739
• /
• 1994

In a centralized spread-spectrum packet radio network, a random assignment -transmitter-based spreading code protocol(RA-T) is proposed which permits the contention mode only in the trasmission of a preamble while avoiding collision during the data packet transmission by assigning near-orthogonal spreading codes to each user. Compared to the conventional transmitter-based code scheme, this scheme allows reduction in receiver complexity when only a small number of distinct spreading codes are employed for the preamble transmission. Throughout theoretical and simulation results, it is shown that the use of the RA-T scheme with just two or three distinct codes for the preamble packet achieves most of the performance gain.

• Ocean and Polar Research
• /
• v.38 no.4
• /
• pp.325-330
• /
• 2016

Partial high frequency bands were allocated to the operation of ocean surface radars that monitor the sea surface currents and waves in WRC-12. On that basis, government-related organizations revised the table of domestic frequency allocation. In order to study radio environments in the allocated bands for ocean radar, tests of the radio signal spectrum were carried at 7-sites using the receiver of the ocean surface radar system operated with a shutdown of the transmitter for 10-60 min. The results showed that no serious radio noises occur at 25 and 43 MHz bands, indicating a good radio environment for the ocean surface radar operation. However, at 13 MHz band, it was difficult to generate stable and confidential data from the ocean surface radar because serious radio noises occurred continuously.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.99-103
• /
• 2010

Motivated by recent works on spectrum-sharing systems, this paper investigates the effects of transmit diversity on the peak interference power limited cognitive radio(CR) networks. In particular, we derive the ergodic and outage capacities of a spectrum-sharing system with multiple transmit-antennas. To derive the capacities, peak interference power constraint is imposed to protect the primary receiver. In a CR transmitter and receiver pair with multiple antennas at the transmitter side, the allowable transmit power is distributed over the transmit-antennas to achieve transmit diversity at the receiver. We investigate the effect of this power distribution when a peak interference power constraint is imposed to protect the primary receiver. We show that the transmit diversity does not improve the ergodic capacity compared to the single-antenna system. On the other hand, the transmit diversity significantly improves the outage capacity. For example, two transmit-antennas improve the outage capacity 10 times compared to the single-antenna with a 0 dB interference constraint.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.145-151
• /
• 2003

A global ultrasonic sensor system for self-localization of a mobile robot is proposed in this paper. The global ultrasonic sensor system consists of three or more ultrasonic transmitters fixed at some positions in the world coordinate and receivers in the moving coordinate of a mobile robot. In this global sensor system it is easy to get state vector of the mobile robot in the world coordinate from the distance information between each ultrasonic transmitter and receiver. An extended kalman filter algorithm is used to process the noisy ultrasonic signal and to estimate the state vector. In case of using several independent ultrasonic transmitters, it is necessary to avoid the cross talk among the ultrasonic waves and to synchronize between each ultrasonic transmitter and receiver. The small sized radio frequency modules are adopted to solve the cross talk and the synchronization problem Computer simulation and experiments are carried out to verify the effectiveness of the proposed ultrasonic sensor system.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.423-431
• /
• 2004

In earlier works on transmitter power control in cellular radio systems, the problem of whether a signal-to-interference ratio (SIR) threshold is achievable is determined by apparently different rules for homogeneous and heterogeneous SIR systems. In this paper, we present a unified and more universal framework for both cases. We also highlight the conditions under which a given SIR threshold vector for the heterogeneous SIR system is achievable, although so far there is no general solution to this problem.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.166-170
• /
• 2012

This paper presents a tunable composite right/left-handed (CRLH) delay line for a delay line discriminator that linearizes modulated frequency sweep in a frequency modulated continuous wave (FMCW) radar transmitter. The tunable delay line consists of 8 cascaded unit cells with series varactor diodes and shunt inductors. The reverse bias voltage of the varactor diode controlled the group delay through its junction capacitance. The measured results demonstrate a group delay of 8.12 ns and an insertion loss of 4.5 dB at 250 MHz, while a control voltage can be used to adjust the group delay by approximately 15 ns. A group delay per unit cell of approximately 1 ns was obtained, which is very large when compared with previously published results. This group delay can be used effectively in FMCW radar transmitters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.823-828
• /
• 2011

We have systematically designed and experimentally demonstrated the opto-electrical predistortion optical transmitter using microwave circuit modelling for reducing the nonlinearity of the distributed-feedback laser diode (DFD-LD). The DFB-LD is analyzed using microwave circuits model based on rate equations. Through the system-level simulation for predistortion method, the optimized characteristics of the RF components in the system are confirmed. The simulated and experimental results show the reduced distortion products. These results are analyzed as the evaluation parameters for the miniaturization and optimization of the opto-electrical predistortion method in radio-over-fiber systems.