• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.849-854
• /
• 2016

5G New Radio Access Technology(: RAT) is studied by many researchers because the current radio frequency is insufficient to accommodate the increased mobile communication data traffic. However, there are few researches to study on the issue whether the wired mobile network can accommodate the new RAT. Therefore, in the paper, the study on the issue whether the Radio over Fiber(: RoF) system can accommodate the new RATs such as millimeter wave communication, terahertz communication, and optical wireless communication. As a result of the study, only millimeter wave communication deserve to be considered in ten years and even RoF system may not support the increased bandwidth of the millimeter wave communication when beamforming is used.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.45-52
• /
• 2005

In this paper, we propose the PLL system of the local oscillator system for the millimeter wave band's radio astronomy receiving system. The development of the proposed local oscillator system based on the YIG oscillator VCO with $26.5\~40GHz$ specification. This system consists of the oscillator part including the YIG VCO, the harmonic mixer, and the isolator, the RF processing part including the triplexer, limiter, and RF discrimination processor, and the PLL system including YIG modulator and controller. Based on this configuration, we verify the frequency and power stability of the developed local oscillator system according to some temperature variation. From this test results we confirm the stable output frequency and power characteristic peformance of the developed LO system at constant temperature.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.55-60
• /
• 2009

This paper deals with the analysis of characteristics of the scale non-uniformly formed on the surface of the steel during the steel production processes. The steel made at the high temperature contacts with the oxygen in the air, so forms the scale immediately. The scale has a role to protect the surface of the steel product as a oxide-layer, but the scale formed non-uniformly spoils the exterior of the steel product and occurs the problems about the next processes. There is a pickling process to remove the scale of the steel products, but the real situation is that the pickling process is not also based on the analysis of the characteristics of the scale. Therefore, this paper describe the procedures of the analysis of the scale more effectively using the radio-frequency wave. Using the radio-frequency wave, this paper introduce the experimentations to analyze the distributions of scale, the junction characteristics between the surface of steel and scale and the distributions of scale on the produced steel coil. Also, according to the simple simulations, this paper proves the proprieties about the above contents.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.113-118
• /
• 2006

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency rage of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses ,however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using Sendust, $Al(OH)_3$, and CPE. The double-layered EM wave absorber with thickness of 1.5 mm has absorption ability more than 10 dB at 2.4 GHz.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.183-189
• /
• 2010

A localization system for indoor robots is an important technology for robot navigation in a building. Our localization system imports the GPS system and consists of more than 3 satellite beacons and a receiver. Each beacon emits both an ultrasonic wave and radio frequency. The receiver in the robot computes the distance from it to the beacon by measuring the flying time difference between ultrasonic wave and radio frequency. It then computes its position with the distance information from more than 3 beacons whose positions are known. However, the distance information includes errors caused from the ultrasonic sensors; we found it to be limited to within one period of a wave (${\pm}2\;cm$ tolerance). This paper presents a method for predicting the maximum position error due to distance information errors by using Taylor expansion and singular value decomposition (SVD). The paper also proposes a measuring parameter such as sensitivity to represent the accuracy of the indoor robot localization system in determining the robot's position with regards to the distance error.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.9-14
• /
• 2005

Simulation method for a pure radio-frequency (rf) mode of reflection-type and a pure rf mode of transmission-type radio-frequency single-electron transistor (RF-SET) operation is introduced. In this method, the solutions of differential equations based on Kirchhoff's law are obtained self-consistently at frequency-domain. Also, the steady-sate single-electron transistor (SET) current model and the time-dependent SET current model are used in this method. The reflected wave of a typical reflection-type RF-SET and the transmitted wave of a typical transmission-type RF-SET are calculated, and the accuracy of our developed method including the steady-state SET current model is verified with the method introduced by reference 2. At high frequency over GHz, results of our developed method including the time-dependent SET current model are considerably different from that including the steady-state SET current model. At high frequency over GHz, an exact time-dependent SET current model is needed to analyze RF-SET operation.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.161-166
• /
• 2010

The bandwidth of detecting radars used for military purpose is increasingly broadened, and recently, the frequency band of the detecting radars is expanding to millimeterwave bands of the millimeterwave bands of 35 GHz and 94 GHz. Since, especially, it is essential and important to fabricate and develop EM wave absorber with the absorption ability more than 10 dB in 94 GHz band, the EM wave absorber was manufactured based on the design method by FDTD simulation. As a result, the developed EM wave absorber with the composition ratio of Binder(CPE with additional materials) : Carbon = 70 : 30 wt.% has the thickness of 0.7 mm and the absorption ability more than 14 dB in the frequency range of 94 GHz.

• Information and Communications Magazine
• /
• v.19 no.9
• /
• pp.31-42
• /
• 2002

CRL (Communications Research Laboratory, Independent Administrative Institution, Japan) is developing ITS wireless communication technologies in millimeter-wave frequency region. Technologies are categorized for inter-vehicle communications (IVC) and road-vehicle communications (RVC). In this paper, system concepts and the experimental facilities are introduced. The experimental facility for inter-vehicle communications is gotten ready in 60 GHz frequency region and the experimental system for road-vehicle communications is based on RoF (Radio on Fiber) technology in 36-37GHz frequency region.

• Korean Management Science Review
• /
• v.23 no.3
• /
• pp.225-242
• /
• 2006

The Spectrum Usage Fee System which has been introduced and enforced since 1993 has had a great role for effective use of the radio frequency resources and the promotion of radio wave industry. However, the current system has been criticized due to several drawbacks. For example, broadcasting stations and national institutions are exempted whereas the overdue utility rate on some frequency has been imposed. So there has been rising the questions on whether the principles of fair imposition are broken. Another problem regarding the current system is that how to calculate the fee is too much complicated, and it needs to be revised into a simpler and clearer formulation. In this regard, this study intends to propose a new calculation framework for the radio spectrum usage fee and then prove its validity empirically on the basis of real data gathered from MIC and focus group interview.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.569-573
• /
• 2011

In this paper, we developed a Smart Heat Radiating Sheet(SHRS) having the absorption ability of more than 15 dB, and thermal conduction rate more than 20 W/mk for port logistics RFID(Radio Frequency IDentification) system by using AMP(Amorphous Metal Powder) and shielding sheet. Firstly, the EM(Electro_Magnetic) wave absorber samples were fabricated by using AMP and CPE (Chlorinated Polyethylene) with different composition ratios of 80 : 20 wt.% and 85 : 15 wt.%, respectively. Secondly, we fabricated the Smart Heat Radiating Sheet using the shielding sheet to attach EM Wave Absorber. As a result, the Smart Heat Radiating Sheet with absorption ability of 16 dB at 433 MHz and thermal conduction rate is 24 W/mk has been developed with the composition ratio of Amorphous Metal Powder : CPE = 85 : 15 wt.% and thickness of 5.5 mm.