• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.379-388
• /
• 2020

현행 무선업무 및 무선국 분류체계의 문제점을 분석하고, 미국의 전파관리 사례를 조사하여 합리적이고 효율적인 전파관리 방안을 마련하는 것이 본 연구의 내용 및 범위이다. 본 연구결과를 전파법 시행령, 무선업무 및 무선국종 분류기준 등에 관한 법제도 개정 시 기초자료로 활용할 수 있다. 향후 새로운 무선업무/무선국의 정의 및 분류체계에 대한 상세한 해설집을 마련하여 실무에서의 정책 순응도를 높이는 한편, 무선국 허가·검사 업무의 정합성 및 효율성 제고에 기여할 수 있을 것으로 기대된다.

• 한국항해항만학회지
• /
• 제30권2호
• /
• pp.161-166
• /
• 2006

In order to construct an Anechoic Chamber satisfying international standards for EMI testing, it has been recognized that the absorption characteristics of the EM wave absorber must be higher than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the Equivalent Material Constant Method(EMCM) and Finite Difference Time Domain(FDTD). The proposed absorber is to attach a pyramidal absorber onto a hemisphere-type absorber on a cutting cone-shaped ferrite. As a result, the proposed absorber has absorption characteristics higher than 20 dB over the frequency band from 30 MHz to more than 20 GHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.209-210
• /
• 2008

We have proposed a bow-tie UWB antenna using a U-shaped stub. The proposed antenna covers the entire ISM frequency (2.45 GHz) and DS-OFDM UWB band ($3.1\;{\sim}\;5\;GHz$). Simulated and measured results are found to be in good agreement with each other. The designed antenna has the figure-of-eight radiation pattern, wide bandwidth, dual-band, and negligible dispersion over the operating frequency band.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.28-33
• /
• 2008

We have proposed a novel DVB-H(Digital Video Broadcast for Handheld) antenna for folder-type mobile handheld terminal by using a coupling element, a stub, and an L-type matching circuit. The L-type matching circuit consisting of two chip inductors is used for achieving an improved impedance matching over the DVB-H frequency band ($470{\sim}702\;MHz$). Simulated results showed the stub worked to more knot the lower and upper frequency ends of the input impedance curve. The antenna exhibits a flat gain characteristic from 2 to 2.8 dBi over the DVB-H frequency band. The radiation patterns are a stable Figure-of-eight radiation pattern in the frequency range.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.305-306
• /
• 2006

This paper introduces a radio-wave interference assessment of wind turbines that were planned to be installed at Homi-Cape in Pohang region where wind resource has been evaluated worthwhile developing a wind farm. In that area, AM radio station with two antennas and a harbor radar facility are located so that radio-wave coupling is inevitable if the wind farm is designed without considering radio-wave environmental impact. A low-frequency analysis using MoM (Method of Moment) is used to examine interference effect caused by wind turbines and an optimal layout minimizes coupling effect is presented.

• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.16-21
• /
• 2002

On the contrary to the progress of the electronic industry and radio communication technologies, many social problems such as EMI, due to unnecessary electromagnetic(EM) wave are serious with the increased use of EM wave. It is required that the absorbing capability of an EM wave absorber is more than 20 dB, the bandwidth of which is required from 30 MHz to 18 GHz to satisfy the international standard about an anechoic chamber for EMI/EMS measurement$^{[1]}$TEX>. However, the absorbing frequency band of the conventional EM wave absorbers satisfying more than 20 dB is very narrow, for examples, from 30 MHz to 400 MHz in ferrite tile type and from 30 MHz to 870 MHz in ferrite grid type, respectively. In this paper, we proposed and designed a new tripe absorber with broadband characteristics covering the frequency band from 30 MHz to 10 GHz by use of the equivalent material constants method (EMCM)$^{[2]~[4]}$TEX>.

• 한국전자통신학회논문지
• /
• 제4권3호
• /
• pp.176-182
• /
• 2009

이 논문은 오늘날 정보통신 기술의 발전으로 새로운 방송, 통신, 융합서비스의 등장이 본격화됨에 따라 그동안 분리되어 규제된 방송과 통신에 대한 법제도의 변화가 일어나고 있다. 이러한 환경변화에 따른 전파법의 변천사에 대하여 고찰하고자 한다.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.95-99
• /
• 2001

According to the progress of the electronic industy and radio communication technologies, mankind might enjoy its abundant life On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organiztions such as CISPR, FCC, ANSl,etc. have provided the standard of electromagnetic wave enviroment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurment. From November of 1998, however, the CISPRll has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurementent$^{[1]}$ . In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futheremore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.415-420
• /
• 2005

To construct an anechoic chamber for EMI test satisfying some international standards, it has been recognized that the absorption characteristics of the EM wave absorber must have more than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the EMCM[1]. As a result, the proposed absorber has absorption characteristics more than 20 dB over the frequency band from 30 MHz to more than 20 GHz.